Construction of 33 KV Cable line

Amount

Work No. 1 PART - A- MATERIAL PROVIDED BY CONTRACTOR

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘V’ Type Cross Arm 100x50x6mm, MS Channel ( 7.9 Kg/m)

33 KV Polymer Pin Insulator

Number Plate

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

X-arm clamp with nut bolt for ST Pole 11 mtr/13mtr with nut bolt by 50x8 mm MS flat Iron make

X-arm clamp with nut bolt for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

Stay set with Clamp for ST Pole 11 mtr/13mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay set with Clamp for PCC Pole 9 mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay Rod 20x1800 mm

Stay wire 7/8 SWG

MS Earthing Rod 20x2500 mm

33 KV Polymer Disc Insulator 70 KN B&S Type

Disc fitting 70 KN B&S Type for DOG

P.G. Clamp for DOG

‘E’ Bracket for 33 KV

M.S. Angle Iron 65x65x6mm bracing with clamps

M.S. Angle Iron 7.8 feet L.S.with clamps For Pole Extension

33 KV. Top channel ( 125x65mmX3200 mm ( 10.7 Kg/m) with clamps

33 KV Guarding angle

GI Wire 5 mm

33 KV Guarding angle Clamp with nut bolt for ST Pole 11 mtr/13mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

33 KV Guarding angle Clamp with nut bolt for PCC Pole 9 mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.

F-bracket with nut bolt for ST Pole 11 mtr/13mtr & PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

Stud Clamp for S.T. Pole 11 mtr Long

Part B- DETAILS OF WORK-Shifting,loading and carriage of following materials from Store Center Padrauna to work site.

P.C.C. Pole 9 M long

S.T. Pole – 11 Mtr. Long

S.T. Pole – 13 Mtr. Long

33 KV ‘XLPE’ Cable 3x300mm²

ACSR ‘Dog’ Conductor

Laying of 33 KV 3x300 mm² ‘XLPE’ cable of double circuit by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method by drilling machine as per site requirement.

Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.(Rs 1475/mtr)

Providing & Cable jointing charges of 33 KV XLPE Cable Outdoor.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Erection of Single pole structure on 9 Mtr PCC Pole (35 No pole for Proposed line and 05 No Pole for Maintenance of existing line) including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO).

Erection of Double pole structure on PCC Pole 9 Mtr. including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) .

Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) .

Erection of Single pole structure on 11mtr ST. (SP-55) Pole (21 No pole for Proposed line and 02 No Pole for Maintenance of existing line) including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Erection of Single pole structure on 13 mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.

Erection of Double pole structure on 13 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Erection of four pole structure on 13 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Stud ST Pole on 11 mtr as supporting of single pole/Double Pole /Four pole etc

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Painting of S.T Pole 11 mtr.& 13 mtr Long with Alluminium paint and red oxide paint etc.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Work No. 2 PART - A- MATERIAL PROVIDED BY CONTRACTOR

33 KV Straight through 3x300 mm2

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘V’ Type Cross Arm 100x50x6mm, MS Channel ( 7.9 Kg/m)

33 KV Polymer Pin Insulator

Number Plate

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

X-arm clamp with nut bolt for ST Pole 11 mtr/13mtr with nut bolt by 50x8 mm MS flat Iron make

X-arm clamp with nut bolt for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

Stay set with Clamp for ST Pole 11 mtr/13mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay set with Clamp for PCC Pole 9 mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay Rod 20x1800 mm

Stay wire 7/8 SWG

MS Earthing Rod 20x2500 mm

33 KV Polymer Disc Insulator 70 KN B&S Type

Disc fitting 70 KN B&S Type for DOG

P.G. Clamp for DOG

‘E’ Bracket for 33 KV

M.S. Angle Iron 65x65x6mm bracing with clamps

33 KV. Top channel ( 125x65mmX3200 mm ( 10.7 Kg/m) with clamps

33 KV Guarding angle

GI Wire 5 mm

33 KV Guarding angle Clamp with nut bolt for ST Pole 11 mtr/13mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

33 KV Guarding angle Clamp with nut bolt for PCC Pole 9 mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.

F-bracket with nut bolt for ST Pole 11 mtr, 13 mtr & PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

Stud Clamp for S.T. Pole 11 mtr Long

Stud Clamp for PCC Pole 9 mtr Long

Part-B Work: Shifting,loading and carriage of following materials on private truck at store centre Padrauna & Un-loading of the same with proper stacking at work site .

P.C.C. Pole 9 M long

S.T. Pole – 11 Mtr. Long

S.T. Pole – 13 Mtr. Long

33 KV ‘XLPE’ Cable 3x300mm²

ACSR ‘Dog’ Conductor

Laying of 33 KV 3x300 mm² ‘XLPE’ cable of double circuit by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method by drilling machine as per site requirement.

Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.(Rs 1475/mtr)

Providing & Making of Straight Through charges of 33 KV XLPE Cable

Providing & Cable jointing charges of 33 KV XLPE Cable Outdoor.

GI Pipe Earthing Complete for Cable jointing Kit with materials

Erection of Single pole structure on 9 Mtr PCC Pole (78 No pole for Proposed line and 14 No Pole for Maintenance of existing line) including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO).

Erection of Double pole structure on PCC Pole 9 Mtr. including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) .

Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete as per RESSPO) .

Erection of Single pole structure on 11mtr ST. (SP-55) Pole (32 No pole for Proposed line and 04 No Pole for Maintenance of existing line) including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.

Erection of Double pole structure on 11 mtr ST Pole (03 No pole for Proposed line and 01 No Pole for Maintenance of existing line). including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Erection of Single pole structure on 13 mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.

Erection of Double pole structure on 13 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Erection of four pole structure on 13 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .

Stud PCC Pole on 9 mtr as supporting of single pole/Double Pole /Four pole etc

Stud ST Pole on 11 mtr as supporting of single pole/Double Pole /Four pole etc

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Painting of S.T Pole 11 mtr.& 13 mtr Long with Alluminium paint and red oxide paint etc.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

INDIA SUPPY CORPORATION

Manish Traders