Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.6 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹47.6 L+₹39,323 (0.83%)Rejected-Finance SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹47.6 L+₹44,228 (0.94%)Rejected-Finance 30 HAREN MUKHERJEE ROAD HAKIMPARA SILIGURI 734 001 DARIEELING WB | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹47.8 L+₹62,663 (1.33%)Rejected-Finance VILL DANGAPARA NEAR SAHID BEDI PO RAHARAH PS KHARDAH KOLKATA 700 118 | 24 PARAGANAS NORTH | WEST BENGAL | 700118 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹48.2 L+₹98,553 (2.09%)Rejected-Finance ATUL PRASAD SARANI DUDH MORE SILIGURI 06 DARJEELING WB | DARJEELING | WEST BENGAL | 734001 | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
COMPREHENSIVE REPAIR IN TARAPORE VIHAR, VIKRAM BATRA VIHAR UNDER AGE B/R II OF GE SUKNA IN SUKNA MIL STN
2023_MES_575314_1
GE Sukna/8499
Open Tender
Civil Works
Works
270 days
Sukna
AS PER NIT
8 documents required · 8 mandatory
₹500
GE Sukna
₹90,000
Yes
27 Feb 2023
16 Jan 2023
9 Feb 2023
16 Jan 2023
7 Feb 2023
2 Feb 2023
17 Jan 2023 - 7 Feb 2023
Amount
Supply only integral water proofing compound complete all as specified.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for Granite work (of any type) 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over 15 mm thick screed bed in CM (1:4) including Demolition complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each complete all as specified and directed.
Taking down door shutter of any description N. exc. 1 sqm each complete all as specified and directed.
Taking down door shutter of any description exc. 1 sqm but not exc. 2 sqm each & Refixing at same opening complete all as specified and directed.
S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed.
S & F of 30 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both faces complete all as specified and directed.
S & F of 30 mm thick (Batten thickness) 2nd class hardwood (SHISHAM) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.
S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F of 100 mm size mild steel hasp and staple wire type, stove enamelled lack including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F of 40 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.
S&F in repair mortice lock, vertical type, size 100 mm four lever of Aluminium complete all as specified and directed.
S & F in repair of Door closer Aluminium(Die cast) body Hydraulically regulated ( designation No. 3) universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 t0 80 kg complete all as specified and directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F magnetic catch of size not less than 40 x 15 mm suitable for cup board complete all as specified and directed.
S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling and including dismantling of old ceiling board and framework complete all as specified and directed.
S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. including cutting, welding etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.
S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.
S & F of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and including P.C.C. (1:3:6) for filling in frame and fixing of hold fast, complete all as specified and directed.
S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and including P.C.C. (1:3:6) for filling in frame and fixing of hold fast, complete all as specified and directed.
S & F of steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S & F of steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
S & F of steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) door, window, ventilator Frame & shutters, sliding type or openable type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodised aluminium fittings etc. complete all as specified and directed. Note : (a) Weight of rubber gasket beading, roller wheels etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measured. (b) Wire mesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old AC sheet complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including dismantling of old AC sheet complete all as specified and directed.
M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork complete all as specified and directed.
S & F in repair of 12 mm thick particle board, medium density, flat pressed, single layer or three layers type with BWR type adhesive and fixed with screws to timber frame as in linings, panelling similar location complete all as specified and directed.
S & F in repair of 18/19 mm thick particle board, medium density, flat pressed, single layer or three layers type with BWR type adhesive and fixed with screws to timber frame as in linings, panelling similar location complete all as specified and directed.
M&L for roof treatment in order of precedence as given below complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface. (iii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm.
(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer's instruction. Note :- (a) Bituminous primer shall be "ShaliTex Primer" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction. (d) APP based polymeric membrane shall be manufactured by M/s STP Ltd or Berger Paints or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (e) Water proofing paint shall be by M/s STP Ltd or Berger Paints or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited
M & L for providing 75 mm thick cement concrete (1:4:8) Nominal Mix type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc complete all as specified and directed.
M&L making good broken / damaged RCC chajjas with PCC 1:2:4 type B1 or cement mortar 1:3 and including rendering 15 mm thick in CM 1:4 mixed with water proofing compound as per manufacturer's instruction to top, sides and soffits, including necessary scaffolding, formwork upto 3 storey height including demolition complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
M & L for Glazed ceramic coloured tiles of size 350 mm X 250 mm X 7 mm thick or 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including cement screed bed of 10 mm thick 1:3 in cm complete all as specified and directed.
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thick screed bed in CM 1:4 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed.
M&L 60 mm thick machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment including dismantling complete all as specified and directed.
Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of Cement base paint over a coat of primer complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concret or brick surrounds, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and directed.
S&F 3.00 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty/wooden beads in square n.exc. 0.50 sqm in each pane complete all as specified and directed.
S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
S & F of 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square exc. 0.5 Sqm in each pane complete all as specified and directed.
M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of New or previously untreated steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.
S&F in repairs fancy type mild steel, chromium plated brackets / clamps to be fixed at walls for holding curtain rods & corners to be fixed at ends of curtain rod 20 mm dia with necessary screws complete all as specified and directed. Note :- 2 Nos bracket and 2 Nos corners shall be measure as one pair
S&F in repairs 20 mm dia curtain rod mild steel with decorative wooden finish complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of 500 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank & Dismantling of Old tank complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of 1000 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank & Dismantling of Old tank complete all as specified and directed.
S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
S&F in repairs 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.
Dismantling of structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving Not exc. 15 cm thick but above ground floor complete all as specified and directed.
Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
R N SAH N CO
MS ORIENT ENGINEERING WORKS
SHANTI UDYOG
MS ESSCON
S D CONSTRUCTION CO
Janata Enterprises
SHIVALAYA ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .