NIT No. 02 (22-23) Item No. 20

SITC of 5 HP clear water pump set no-02 with other allied works at Bhatnagar Colony BPS. i/c following works:- Dismantling of old 5 HP pump set by removing electric connection and remove the common base frame by cutting old nut bolt with the help of gas cutter and manual labour and demolish the RCC foundation by pneumatic hammer also removing the old cable and old starter.

S/o horizontal split casing pump with CI impeller, Neck Ring and Casing (CI), Shaft & Sleeve SS-410, coupled with TEFC IE2 rating motor mounted on suitable MS Base Frame with coupling & coupling guard. 1) Pump Duties-Discharge-14cum/hr,Head-56mtrs, size-80mmx100mm. Make : Kirloskar/Mather & Platt/DJB Approved make. 2) Motor-5 HP/3.72 KW, RPM-1430. make-KEC/CG/ABB/DJB Approved make

S/o Nut bolts and washer off sizes.

S/o rubber insertion sheet 75% synthetic. Make : Jyoti

S/O MS pipe 80 mm dia size, medium class with MS flange welded in both sides 3 mtrs long with MS strips complete with threading work of both side. Make: Jindal/Tata

S/o reducer 6mm thick of size 50 mm to 100 mm of 1 feet length

Supply Of 50mm MS bend with both side flange welded. Make:- Tata/Jindal/Djb Approved Make.

Supply Of 50mm MS Tee Make:- Tata/Jindal/Djb Approved Make.

S/O MS pipe 50 mm dia size, medium class with MS flange welded in both sides 3 mtrs long with MS strips complete with threading work of both side. Make: Jindal/Tata

Supply of 10 HP, three phase, 415 volts, 50 HZ, fully automatic star delta oil immersed motor starter :- Bentex ,capital, djb approved make

Supply of transformer oil. Power/Savita/DJB approved make.

Supply of On load change over switch 100Amp. Open execution type. Make:L&T

Supply of 4 x 6 Sqmm PVC insulated armoured inner sheathed copper conductor cable for making connection of motor & starter. Make : Grandlay /Glostar/National/Djb Approved Make.

Providing & Fixing of Lighting arrangement including providing fixing 4 Nos LED Batten, 1 No Ceiling Fan, 1 No Exhaust Fan, 3 Nos Flood light and also control Board etc i/c electrification of the complete Pumphouse as required at site.

Making Provision of Charging system for the pumpsets with supply of articles like gate valve, Union, Pipe Elbow, Bend and other articles as per site requirement

Making of RCC foundation of size 1.6 Mtr x 0.70 Mtr x 0.25 Mtr by 1:1.5:3 concrete including providing fixing of 12 Nos. foundation bolt of size 25mm x 600mm i/c leveling & plastering.

Complete painting of 1 Nos Main Gate, 2 Nos MS Gate,1 No MS Window, 2 Nos Suction Delivery line and 1 No Pumpset as site requirement and using article for painting . The labour charges like : Scrubbing/Cleaning of rust from the equipment and proper processing of surface by manual labour / machine (grinder) by air Compressor.

Installation of above, pump sets, with proper alignment and also making of all electrical connections i/c thimbling & tapping & fitting of flanges reducers, Bends, Tee, Pipes, Starters laying of cable from Starter to Motor with the help of welding, gas cutter & tri pod etc as required i/c cartage and testing on full load etc.

Gupta Brothers