Loading
Loading…
Loading…
Tender Value
₹47.7 L
EMD Value
₹95,500
Closing Date
4 May 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
BUILDINGS
12 conditions · 1 needing a document upload
No eligibility criteria is required for works costing less than 50 lakhs
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
22 conditions · 3 needing a document upload
Submission of Annexure-V under Document Verification Certificate- As per Advance Correction Slips to GCC - 2022, the tenderers shall submit copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder in form of Annexure V. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid.
Submission of Annexure-V(A) under Document Verification Certificate : In case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case may be. Non-submission of the above Certificate (s) by the bidder shall result in summarily rejection of his/their bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, Contact Number (ii) Copy of PAN Card (iii) Copy of GSTIN card
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/ Contractor not having NEFT form may down load the empty NEFT form available in document site)
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP)etc. The tenderer(s) shall enclose the attested copies of the requisite documents(including Power of Attorney, if opted) for constitution of their concern as per clause 14 of GCC Part I and as per a) Clause 17 of GCC Part I, for JV b) Clause 18 of GCC Part I, for Partnership firm
All the instructions furnished in the Technical compliance/ Commercial Compliance/ Check-list/ Undertakings are only indicative and not exhaustive; The Tenderer shall read the GCC/Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
If the Tenderer(s) deliberately give(s) wrong information/ or create incorrect documents in his/their offer or create circumstances for the acceptance of his/their offer, the Railway reserves the right to reject such offer at any stage.
All terms and conditions in the tender documents are binding on the Tenderers
Railway reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning any reason.
Unreleased Bid Security, if any, held with the Railway Administration, shall not be adjusted towards the Bid Security to be remitted.
Bid Security shall be deposited either in cash through e-payment gateway or e-BG or submitted as Bank Guarantee bond from a scheduled bank of India or as mentioned in tender documents subject to exemptions provided under para5(1) (a) of Part-1 (ITT) of GCC.
In case of submission of Bid Security in the form of Bank Guarantee, the Original Bank Guarantee (other than e-BG) should be delivered in person to the Official nominated as indicated in the Tender document within 5 working days before the closing date of submission of bids.
SW-I: General Civil Maintenance Works in and around NGO Building Premises ; SW- II: General Civil Maintenance Works in and around NGO -Annex Building.
MAS12OF26054B
MAS12OF26054B
Open
Works - General
4 Months
Chennai, Tamil Nadu
₹0
₹95,500
4 May 2026
10 Apr 2026
20 Apr 2026
171 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| CARRIAGE OF MATERIALS | — | — | — | — | |
| By Mechanical Transport including loading, unloading and stacking | — | — | — | — | |
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 95 | 494.1 | 46,939.5 |
| By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM | — | — | — | — | |
| Lime, moorum, building rubbish | — | — | — | — | |
| 2 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 95 | 227.18 | 21,582.1 |
| CONCRETE WORK | — | — | — | — | |
| CEMENT CONCRETE (CAST IN SITU) | — | — | — | — | |
| Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | — | — | — | — | |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) | cum | 1.9 | 7,654.85 | 14,544.22 |
| MASONRY WORK | — | — | — | — | |
| General | — | — | — | — | |
| Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | — | — | — | — | |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 4.75 | 7,132.25 | 33,878.19 |
| CLADDING WORK | — | — | — | — | |
| General | — | — | — | — | |
| Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels | — | — | — | — | |
| Granite stone slab colour black, Cherry/Ruby red | — | — | — | — | |
| 5 | Area of slab over 0.50 sqm | Sqm | 7.6 | 5,136.3 | 39,035.88 |
| STONE WORK DRY CLADDING | — | — | — | — | |
| Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. | — | — | — | — | |
| 6 | Kiln seasoned and chemically treated hollock wood | cum | .66 | 1,87,277.65 | 1,23,603.25 |
| WOOD AND P.V.C. WORK | — | — | — | — | |
| FRAMES AND TRUSSES | — | — | — | — | |
| Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). | — | — | — | — | |
| 7 | Second class teak wood | cum | .57 | 1,42,949.7 | 81,481.33 |
| Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : | — | — | — | — | |
| Float glass panes | — | — | — | — | |
| 8 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 9.5 | 2,600.45 | 24,704.28 |
| 9 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | Sqm | 57 | 1,800.45 | 1,02,625.65 |
| Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | — | — | — | — | |
| 10 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 13.3 | 2,172.1 | 28,888.93 |
| 11 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 13.3 | 462.35 | 6,149.26 |
| BRASS FITTINGS | — | — | — | — | |
| Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : | — | — | — | — | |
| 12 | 125x85x5.5 mm (heavy type) | Each | 15 | 268.65 | 4,029.75 |
| Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : | — | — | — | — | |
| 13 | 200x10 mm | Each | 11 | 358.4 | 3,942.4 |
| Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. | — | — | — | — | |
| 14 | 40 mm | Each | 11 | 311.2 | 3,423.2 |
| Providing and fixing bright finished brass handles with screws etc. complete: | — | — | — | — | |
| 15 | 125 mm | Each | 11 | 256.65 | 2,823.15 |
| 16 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | Each | 15 | 983.15 | 14,747.25 |
| CHROMIUM PLATED BRASS FITTINGS | — | — | — | — | |
| 17 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 11 | 998.35 | 10,981.85 |
| 18 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. | Each | 22 | 151.05 | 3,323.1 |
| ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI MARKED) | — | — | — | — | |
| Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | — | — | — | — | |
| 19 | 300x16 mm | Each | 7 | 303.25 | 2,122.75 |
| GYPSUM BOARD PARTITIONS | — | — | — | — | |
| Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | — | — | — | — | |
| 20 | 1.0 mm thick | Sqm | 76 | 897.3 | 68,194.8 |
| Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). | — | — | — | — | |
| 21 | 12mm thick commercial ply conforming to IS : 1328 BWR type | Sqm | 76 | 1,224.65 | 93,073.4 |
| 22 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 25 | 2,829.25 | 70,731.25 |
| 23 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge. | Sqm | 80 | 2,593.15 | 2,07,452 |
| 24 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 11 | 272 | 2,992 |
| 25 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | ONE SET | 57 | 885.1 | 50,450.7 |
| FLOORING | — | — | — | — | |
| VITRIFIED FLOOR TILES | — | — | — | — | |
| Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | — | — | — | — | |
| 26 | Size of Tile 600x600 mm | Sqm | 28.5 | 1,553.45 | 44,273.33 |
| ROOFING | — | — | — | — | |
| RAIN WATER SPOUT AND PIPE | — | — | — | — | |
| Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | — | — | — | — | |
| 27 | 75 mm diameter | Metre | 14.25 | 248.8 | 3,545.4 |
| 28 | 110 mm diameter | Metre | 28.5 | 377.4 | 10,755.9 |
| Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. | — | — | — | — | |
| 29 | 75 mm | Each | 5 | 369.85 | 1,849.25 |
| 30 | 110 mm | Each | 11 | 371.3 | 4,084.3 |
| 31 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 38 | 738.65 | 28,068.7 |
| Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. | — | — | — | — | |
| 32 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | Sqm | 52.25 | 2,215.15 | 1,15,741.59 |
| FINISHING | — | — | — | — | |
| PEBBLE DASH PLASTER | — | — | — | — | |
| 33 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 76 | 262.7 | 19,965.2 |
| EXTERIOR FINISHING | — | — | — | — | |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 114 | 156.05 | 17,789.7 |
| Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. | — | — | — | — | |
| 35 | One coat | Sqm | 180 | 92 | 16,560 |
| Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. | — | — | — | — | |
| 36 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre | Sqm | 57 | 70.35 | 4,009.95 |
| 37 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 285 | 73.95 | 21,075.75 |
| 38 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 285 | 19.75 | 5,628.75 |
| Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | — | — | — | — | |
| 39 | One or more coats on old work | Sqm | 57 | 102.8 | 5,859.6 |
| Painting with aluminium paint of approved brand and manufacture to give an even shade: | — | — | — | — | |
| 40 | One or more coats on old work | Sqm | 114 | 96 | 10,944 |
| Varnishing with varnish of approved brand and manufacture: | — | — | — | — | |
| 41 | One or more coats with copal varnish | Sqm | 114 | 94.6 | 10,784.4 |
| REPAIRS TO BUILDING | — | — | — | — | |
| WOOD WORK | — | — | — | — | |
| Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. | — | — | — | — | |
| 42 | 25 mm diameter. | Metre | 11.4 | 421.75 | 4,807.95 |
| 43 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete | Each | 15 | 271.45 | 4,071.75 |
| FINISHING | — | — | — | — | |
| 44 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. | Sqm | 57 | 338.25 | 19,280.25 |
| 45 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. | Sqm | 57 | 670.95 | 38,244.15 |
| DISMANTLING AND DEMOLISHING | — | — | — | — | |
| General | — | — | — | — | |
| Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | — | — | — | — | |
| 46 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 7.6 | 2,434.25 | 18,500.3 |
| Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | — | — | — | — | |
| 47 | In cement mortar | cum | 3.8 | 2,060.2 | 7,828.76 |
| Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | — | — | — | — | |
| 48 | For thickness of tiles 10 mm to 25 mm | Sqm | 28.5 | 73.4 | 2,091.9 |
| 49 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | Sqm | 209 | 56.35 | 11,777.15 |
| ROAD WORK | — | — | — | — | |
| CONCRETE PAVEMENTS | — | — | — | — | |
| 50 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 1 | 7,993.8 | 7,993.8 |
| SANITARY INSTALLATIONS | — | — | — | — | |
| General | — | — | — | — | |
| Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: | — | — | — | — | |
| 51 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 1 | 6,767.4 | 6,767.4 |
| Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: | — | — | — | — | |
| 52 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 4 | 1,879.2 | 7,516.8 |
| Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : | — | — | — | — | |
| Kitchen sink with drain board | — | — | — | — | |
| 53 | 510x1040 mm bowl depth 225 mm | Each | 2 | 7,514.65 | 15,029.3 |
| Kitchen sink without drain board | — | — | — | — | |
| 54 | 610x510 mm bowl depth 200 mm | Each | 1 | 4,940.8 | 4,940.8 |
| 55 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 12 | 349.15 | 4,189.8 |
| Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : | — | — | — | — | |
| 56 | White solid plastic seat with lid | Each | 5 | 684.85 | 3,424.25 |
| Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | — | — | — | — | |
| Flexible pipe | — | — | — | — | |
| 57 | 32 mm dia | Each | 11 | 119.55 | 1,315.05 |
| Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : | — | — | — | — | |
| 58 | Rectangular shape 453x357 mm | Each | 5 | 1,361.8 | 6,809 |
| 59 | Rectangular shape 1500x450 mm | Each | 5 | 2,093 | 10,465 |
| Providing and fixing PTMT urinal cock of approved quality and colour. | — | — | — | — | |
| 60 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms | Each | 11 | 175.4 | 1,929.4 |
| 61 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 2 | 18,212.9 | 36,425.8 |
| WATER SUPPLY | — | — | — | — | |
| C.P.V.C. PIPES | — | — | — | — | |
| Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) | — | — | — | — | |
| 62 | 20 mm nominal dia Pipes | Metre | 28.5 | 335 | 9,547.5 |
| 63 | 25 mm nominal dia Pipes | Metre | 38 | 401.55 | 15,258.9 |
| 64 | 50 mm nominal dia Pipes | Metre | 28.5 | 934.15 | 26,623.28 |
| Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work | — | — | — | — | |
| 65 | 50 mm dia nominal bore | Metre | 28.5 | 762.15 | 21,721.28 |
| BRASS FITTINGS | — | — | — | — | |
| Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | — | — | — | — | |
| 66 | 25 mm nominal bore | Each | 6 | 622.4 | 3,734.4 |
| 67 | 50 mm nominal bore | Each | 3 | 1,026.65 | 3,079.95 |
| Providing and fixing uplasticised PVC connection pipe with brass unions : | — | — | — | — | |
| 45 cm length | — | — | — | — | |
| 68 | 15 mm nominal bore | Each | 11 | 97.75 | 1,075.25 |
| C.P. BRASS FITTINGS | — | — | — | — | |
| Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. | — | — | — | — | |
| 69 | 15 mm nominal bore | Each | 10 | 820.7 | 8,207 |
| Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. | — | — | — | — | |
| 70 | 15 mm nominal bore | Each | 10 | 798.95 | 7,989.5 |
| Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 | — | — | — | — | |
| 71 | 15mm nominal bore | Each | 11 | 574.3 | 6,317.3 |
| AIR VALVE & WATER METER (BULK TYPE) | — | — | — | — | |
| Cutting holes up to 30x30 cm in walls including making good the same: | — | — | — | — | |
| 72 | With common burnt clay F.P.S. (non modular) bricks | Each | 13.3 | 416.8 | 5,543.44 |
| 73 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. | Metre | 28.5 | 202.9 | 5,782.65 |
| ALUMINIUM WORK | — | — | — | — | |
| General | — | — | — | — | |
| Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : | — | — | — | — | |
| For fixed portion | — | — | — | — | |
| 74 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 76 | 495.05 | 37,623.8 |
| For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | — | — | — | — | |
| 75 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 19 | 598.6 | 11,373.4 |
| Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | — | — | — | — | |
| 76 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 34.2 | 1,139.3 | 38,964.06 |
| Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): | — | — | — | — | |
| 77 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 34.2 | 1,176.8 | 40,246.56 |
| 78 | With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) | Sqm | 20.9 | 1,685.4 | 35,224.86 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022AdvanceCorrectionSlipNo_11.pdf
ATTACHMENT
ProcedureforLCModeofPayment.pdf
ATTACHMENT
GCCApril2022_compressed.pdf
ATTACHMENT
eTenderformApril2022.pdf
ATTACHMENT
SNWmasterlistason09012026.pdf
ATTACHMENT
specialconditionsofcontractfortrackworksDEC2025.pdf
ATTACHMENT
FORMATIONBUILDINGBRIDGEPWAYWORKSJULY2024_1.pdf
ATTACHMENT
MOVEMENTOFVEHICLESNEARRAILWAYTRACK.pdf
ATTACHMENT
NEFTForm.pdf
ATTACHMENT
IRGCCACS1to10_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .