Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.4 LAccepted-AOC | ₹6.4 L | 1 | Accepted-AOC Awarded for quoting lowest rate |
| 2 | 2₹6.9 L+₹42,726.20 (6.63%)Rejected-Finance | ₹6.9 L+₹42,726.20 (6.63%) | 2 | Rejected-Finance Higher Quoted Rate |
| 3 | 3₹7.9 L+₹1.5 L (22.9%)Rejected-Finance JUNGA DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹7.9 L+₹1.5 L (22.9%) | 3 | Rejected-Finance Highest Quoted Rate |
| 4 | Rejected-Technical LOWER DEVNAGAR VIKASNAGAR SHIMLA 09 | - | - | Rejected-Technical 1) Tender form cost not in the name of SDSCO Shimla due to that reason amount cannot be deposited in the account of SDSCO Shimla as per term and condition. 2) EMD not pledged in favour of SDSCO Shimla and name of bidder not mentioned in FDR. 3) Affid |
| Sl No | Description | Qty | Unit | Kuldeep Sood L3 | SHAILESH KUMAR L2 | Jeet Singh Thakur L1 |
|---|---|---|---|---|---|---|
| 1.00Providing and fixing Aluminium Partition | ||||||
| 1.01 | Providing and fixing anodised aluminium work duly Powder coated of required shade for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/ stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge for doors windows and ventilatiors and glazed partitions frames including carriage of materials within all leads and lifts. | 701.08 | kg | 598 ₹4,19,245.84 | 430 ₹3,01,464.4 Lowest | 465 ₹3,26,002.2 |
| 1.02 | For shutters of doors windows and ventilators including providing and fixing hinges/ pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately) including carriage of materials within all leads and lifts. | 127.68 | kg | 649 ₹82,864.32 | 490 ₹62,563.2 Lowest | 540 ₹68,947.2 |
| 1.03 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides | 45.3 | sqm | 1,190 ₹53,907 | 890 ₹40,317 Lowest | 1,080 ₹48,924 |
| 1.04 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer - In-charge (cost of aluminium snap beading shall be paid in basic item):- glazing with glass panes of 5mm thickness (weight not less than 12.50 kg/sqm including carriage of material within all leads and lifts. | 45.3 | sqm | 800 ₹36,240 Lowest | 1,100 ₹49,830 | 1,080 ₹48,924 |
| 1.05 | Providing and fixing aluminium work for doors, windows, fastener of required length for aluminium windows with necessary screws etc. complete. | 153 | each | 100 ₹15,300 | 90 ₹13,770 | 60 ₹9,180 Lowest |
| 1.06 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer(having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | 11 | each | 1,200 ₹13,200 | 1,100 ₹12,100 | 900 ₹9,900 Lowest |
| 1.07 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | 11 | each | 450 ₹4,950 | 280 ₹3,080 | 200 ₹2,200 Lowest |
| 1.08 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm | 22 | each | 250 ₹5,500 | 80 ₹1,760 Lowest | 80 ₹1,760 Lowest |
| 1.09 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 22 | each | 160 ₹3,520 | 80 ₹1,760 | 30 ₹660 Lowest |
Tender Value
₹7 L
EMD Value
₹17,500
Closing Date
10 Aug 2026, 5:00 pmClosed
SDSCO
O/o Sub Divisional Soil Conservation Officer Shimla Boileauganj-05
Aluminium Partition and Table Cabin
2026_DoA_140331_1
No.Agr.SDSCO/SML/TQ-449
Open Tender
Civil Works - Others
Item Rate
45 days
As per Tender Document
Please refer Tender documents
4 documents required · 4 mandatory
₹350
GM
₹17,500
13 Aug 2026
31 Jul 2026
11 Aug 2026
1 Aug 2026
10 Aug 2026
1 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing Aluminium Partition | |||||
| 1.01 | Providing and fixing anodised aluminium work duly Powder coated of required shade for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/ stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge for doors windows and ventilatiors and glazed partitions frames including carriage of materials within all leads and lifts. | - | kg | 1.25 | - |
| 1.02 | For shutters of doors windows and ventilators including providing and fixing hinges/ pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately) including carriage of materials within all leads and lifts. | - | kg | - | - |
| 1.03 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides | 1 | sqm | 100 | ₹99.9 |
| 1.04 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer - In-charge (cost of aluminium snap beading shall be paid in basic item):- glazing with glass panes of 5mm thickness (weight not less than 12.50 kg/sqm including carriage of material within all leads and lifts. | 1 | sqm | 53 | ₹52.95 |
| 1.05 | Providing and fixing aluminium work for doors, windows, fastener of required length for aluminium windows with necessary screws etc. complete. | - | each | 10 | - |
| 1.06 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer(having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | - | each | 11 | - |
| 1.07 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | - | each | - | - |
| 1.08 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm | - | each | - | - |
| 1.09 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | - | each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
BOQ_208138.xls
BOQ • 0.36 MB
TenderDocument.pdf
Tender Documents • 2.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .