PROVN OF STANDALONE AIR HEATING SYSTEM FOR BLDG NO.P-208, P-209, P-210,P-211, P-212, P-213, P-254, P-255, P-256, P-257, P-258 and P-260 AND SPL REPAIR TO HARD STANDING NEAR BLDG. NO P-117 AT JAKLI REGT CENTRE, SRINAGAR UNDER GE 970 EWS

Amount

Supply, install, testing and commissioning of standalone air heating system for space heating of hot air capacity of 35000 Kcal/Hr suitable for indoor operation with heat exchanger disel or kerosene and fuel filter, burner, blower fan, automatic digital temeparture controller, control panel with visual controls, safety interlocks, over load relay, timers, suitable capacity of fuel tank with following features:- (a) Bottom Flow ( Hot Air release from bottom side of machine) (b) Control panels are double insulated (c) Burning chamber is made of flame resistant mild steel (d) Fully automatic operation (e) Electronic control board is not effected high temperature (f) The monoblock body is insulated by the fiberglass and the exterior protection is secured against corrosin by powder painted sheet metal (g) Heat converting pipes are made of finest quality mild steel (h) Environmental friendly (j) Self diagnosis, Auto restart, Lock, Instant Heat (k) Exterme temperature controlling capabilities at minus at 50˚C with its improved heating capacity it heat easily at sub zero temperature. (k) Stablizer free operation (l) Heat output - 35000 Kcal/Hr (m) Hot Air Tempertaure :40˚C (n) Temperature rise :90˚C max

BOQ Item No 1 Contd…. (o) Thermal efficiency :80-90% (p) Electric Supply :220Volt, 50 Hz (q) Temperature control : Automatic (r) Fuel type : Diesel / kerosen (s) Burner : Riello/Ben-ton. Make: Supertherm/ Westherm/Thermax/ Top mind Industries.

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including PVC casing caping white colour with all accessories of same grade,surface on wall/ceiling including terminated in to Modular flush/ terminal box 60mm deep of required size made out of 2mm thick MS sheet duly painted both sides with modular cover plate, frame of suitable module for mounting modular fittings on the independent board complete all as specified and as directed

S&F Switch Socket combination modular type16 Amps 6 pin, 3 module, complete.

S&F DB with sheet metal enclosure 240 volts, 4 way with 200 Amp rated bus bar single pole & neutral double door type, suitable for MCBs including mounting work as required in position .complete all as specified and as directed

Supply and fixing MCB SPN 40 Amps 240 volts 'C' curve, 50 HZ AC 10 KA , complete all as specified and as directed

Supply and fixing MCB SP 06 to 32 Amps 240 volts 'C' curve, 50 HZ AC 10 KA, complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate, electrode, 600x600mm and 6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI wire 4 mm dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 3 of SSR Part-I Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chanber, 50mm thick RCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata, testing complete all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials.

M&L for Sub Main wiring using FRLS Insulated unsheathed, multistrand copper conductor FRLS PVC cable 2 runs of size 6 sqmm for phase and neutral and one 4 Sq mm for earthing. drawn through rigid PVC casing caping fixed on wall/ground/Ceiling etc., and complete all as directed by Engr-in-Charge. Note: Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase / neutral and one run of cable for earth incl conduit will be measured and paid as one unit length.

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to a distance not exceeding 250m as directed , complete all complete as specified and directed.

Material & labour for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base/floor, finish even and rough, complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Material & labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) for mass conc./ foundation complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed .

Material & labour for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) including use and waste of form work for coping / any description complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of priming paints on plaster surfaces incl preparation of new concrete surfaces plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different complete all as specified.

M/S BHAT ENGINEERING WORKS

Western Engineering Co

Top Mind Industries Pvt Limited

CHINAR CONSTRUCTION TRADERS