Repair/Replacement of LT panel and allied work at 2 ASD and Suri enclave at Mil Stn Beas under GE Kapurthala.

Taking down existing LT panel by disconnecting all incoming and outgoing cables, earthing connection, dismantling PCC and making good the disturbed surface all as directed

Supplying, fabricating & erecting LT panel outdoor type CPRI approved double door totally enclosed weather and vermin proof suitably ventilated 415 Volts 50 cycles, AC supply factory made fully compart mentalized made out of 3.00 mm thick CRCA sheet for laod bearing and 2.00 mm thick for nonload bearing protection of enclose IP 54 as per IS 2147 of 1962 with pretreatment and powder coated of approved colour including suitable size of abgle iron/flat iron frame work/ support required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with including the following :- (a) Aluminium bus bar of capacity 400 Amps for three phase and Neutral. -04 No's (b) Combined Voltmeter 415V, Ammeter 0 to 500 Amps digital type with built in selector switch CTS of suitable ratio (Set of Three), Indicator lamp Incoming:- (i) MCCB 4P 250 Amps, 36 KA 415 Volts (adjustable Thermal and fixed magnet R- 01 No Outgoing:- (i) MCCB FP 125 Amps 16 KA 415 Volts (adjustable thermal and magnatic type70% to 100%)- 02 N (ii) MCB TPN, 63 Amps, 16 KA 415 Volts.- 02 No's (iii) Digital type Digital Timer switch suitable for 3 phase, 415 volts AC supply for street light feeder current rating 32 Amp

Supplying, fabricating & erecting LT panel outdoor type CPRI approved double door totally enclosed weather and vermin proof suitably ventilated 415 Volts 50 cycles, AC supply factory made fully compart mentalized made out of 3.14 mm thick CRCA sheet for laod bearing and 2.00 mm thick for nonload bearing protection of enclose IP 54 as per IS 2147 of 1962 with pretreatment and powder coated of approved colour including suitable size of abgle iron/flat iron frame work/ support required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with including the following :- (a) Aluminium bus bar of capacity 250 Amps for three phase and Neutral.-04 No's (b) Combined Voltmeter & Ammeter 0 to 500 Amps digital type with built in selector switch CTS of suitable ratio (Set of Three) Incoming : (i) MCCB TPN 160 Amps, 36 KA 415 Volts(adjustable thermal and fixed magnetic) - 01 No's Outgoing : (i) MCCB 4 pole 100 Amps 16 KA 415 Volts - 02 No' (ii) MCCB 4 pole 63 Amps 16 KA, 415 Volts - 01 No's (iii) Digital type Digital Timer switch suitable for 3 phase, 415 volts AC supply for street light feeder current rating 32 Amp

M&L for earthing complete with galvanized iron or steel or steel earth plate electrode of size 60cmx60cmx6.3mm thick buried directly in ground, vertically to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at depth of not less than 1.5 mtr below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to GI Strip of size 32x6 mm by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe light grade 20 mm bore for watering including providing funnel and wire mesh GI frame and 10 cm thick suitably reinforced RCC pit cover PCC chamber pit with PCC 1:3:6 type C2 using 40mm graded stone aggregates complete including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown in plate No 5 of SRR-1991 Part-1 .

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

S&F in replacement MCCB, 4 pole, 3 phase, 415 volts, 400 Amps, repturing capacity 35 KA with overload and thermal tripping features complete all as specified and directed.

- ditto - all as per item No 6 here-in-before but 250 Amps repuring capacity 36 KA complete all as specified and directed.

- ditto - all as per item No 6 here-in-before but 200 Amps repuring capacity 25 KA complete all as specified and directed.

- ditto - all as per item No 6 here-in-before but TPN 160 Amps repuring capacity 25 KA complete all as specified and directed.

- ditto - all as per item No 6 here-in-before but TPN 125 Amps repuring capacity 16 KA complete all as specified and directed.