Providing, supplying, fixing and erecting the modern furniture for unfurnished classrooms, laboratory, staff rooms etc. alongwith Electrification work at Govt. College and Polytechnic Building, Education Hub at Diu. (2nd Call)

Amount

Civil Works

Providing and fixing of Table type 9 - 1200mm (L) x 700mm (B) x 750mm (H) supported by 25 x 25 x 3.2 mm SHS MS frame with perforated sheet in front and 19mm th. marine plywood working surface having 4 mm th. Veneer in front. 6mm th. plywood having 4mm th. Veneer under the working suface is to be provided. Cabinet 490mm (L) x 400mm (B) x 682mm (H) made with 16 gauge metal is to be provided beneath the table. 45 mm th. Teak wood edge beading is to be provided at all the edges of the desk. The inside surfaces should be of lacquer polish and the outside surfaces should be of lacquer polish along with melamine polish coating on it. The materials to be used should be of approved make. The hardware should be of approved make. The sample should be approved by the consultant as per the detailed specifications in the drawing and as directed by the EIC. Items shall be completely operational.

Office Chair for Faculty - Supplying, Installing, Testing and Commissioning, similar to Lunic Chair with dimensions W 610 x D 553 x H 762 mm; made from Hand carved solid wood frame, having padded seat and Ergonomically designed back curve for the right comfort and posture. It also comes with armrests. The sample should be approved by the consultant and as directed by the EIC. Items shall be completely operational. Approved Make : Tectona Grandis, Pocho Living, A Cube Inc., Woodsworth or equivalent make.

CLASS ROOM DESK Desk top size 2400 X 400/350 X 34mm. and Gable ends on both ends 800X400X34 mm and Outer modesty panel 2400X250X34 mm, made from 34mm thick laminated Plywood made from 16+16 mm Calibrated BWR plywood confirming to IS 303, both side 0.8 mm laminated with PUR/D3 glued on auto spreader and pressing. Inner Modesty Panel 400 wide X 18 mm and shelf 200 X 2000/1900/1800 X 18mm, Inner Modesty Panel and shelf are made from 18mm thick laminated Plywood made from 16 mm Calibrated BWR plywood confirming to IS 303, both side 0.8 mm laminated with PUR/D3 glued on auto spreader and pressing. All edges are covered by 2/0.8 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. KD fitting: Entire table is assembled through 8mmX45mm concealed bolt with 15mm eccentric cranks, 8mm wooden dowels, etc. Complete drilling and boring work are done on Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts. The rate shall be consolidated for all above items. The rate shall include cost of all materials, fixtures, joineries & labor to complete the work satisfactorily as per instructions of Engineer in charge. No extra payment will be given for any of the reasons. The rate for one set of four seater desk.

CLASS ROOM DESK Desk top size 1800 X 400/350 X 34mm. and Gable ends on both ends 800X400X34 mm and Outer modesty panel 1800X250X34 mm, made from 34mm thick laminated Plywood made from 16+16 mm Calibrated BWR plywood confirming to IS 303, both side 0.8 mm laminated with PUR/D3 glued on auto spreader and pressing. Inner Modesty Panel 400 wide X 18 mm and shelf 200 X 2000/1900/1800 X 18mm, Inner Modesty Panel and shelf are made from 18mm thick laminated Plywood made from 16 mm Calibrated BWR plywood confirming to IS 303, both side 0.8 mm laminated with PUR/D3 glued on auto spreader and pressing. All edges are covered by 2/0.8 mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. KD fitting: Entire table is assembled through 8mmX45mm concealed bolt with 15mm eccentric cranks, 8mm wooden dowels, etc. Complete drilling and boring work are done on Multi drill machine in KD – 32 System. All mounting holes are notched in all axis simultaneously in single reference. Complete interchange ability is required in all parts. The rate shall be consolidated for all above items. The rate shall include cost of all materials, fixtures, joineries & labor to complete the work satisfactorily as per instructions of Engineer in charge. No extra payment will be given for any of the reasons. The rate for one set of three seater desk.

Class Room Bench - 3 Seater (over all Size:1800L x 400D x 750Ht) - Top 25mm thick plywood in calibrator ply covered with 1mm BSL laminatewith 2mm thick pvc edge bidding finish. Under structure made of crca sheet 0.8mm thick shelf. Perforated Modesty panle made of crca sheet 0.8mm thick. 50*25*1.6mm round /Square pipe and bottom pipe 25x25x1.6mm round /square pipe.All metal components are powder coated finish with buffer.seat and back 12mm thick wooden shall.under structure made of 19mm dia round ms crca pipe powder coated finish.

Class Room Bench – 2 Seater - overall size 1200x400x750 - Top 25mm thick calibrator ply covered with 1mm BSL laminate with 2mm thick pvc edge bidding finish.Under structure made of crca sheet 0.8mm thick shelf.Perforated Modesty panle made of crca sheet 0.8mm thick.35*25*1.6mm round /Square pipe and bottom pipe 25x25x1.6mm round /square pipe.All metal components are powder coated finish with buffer.seat and back 12mm thick wooden shall.under structure made of 19mm dia round ms crca pipe powder coated finish.

Type B - Providing and fixing of Cupboard having variable length (600 - 700mm) x 624mm (B) x 2100mm (H) made up of 19 mm th. marine plywood with 1mm th. laminate on both the sides and 12 mm th. soft board at the back. 12 mm th. Marine plywood shutters with 6mm th. teak wood beading on the edges fixed with auto snap hinges and having circular fixed glass openings. All shutters shall have integrated handles and 4 mm th. veneer in the front. All cabinet shutters shall be provided with Standard Mortice locks. The plywood in the interior of the cupboard should be of lacquar polish. The materials to be used should be of approved make. The hardware should be of approved make. The sample should be approved by the consultant as per the detailed specifications in the drawing and as directed by the EIC. Items shall be completely operational.

Providing Combination locks over Standard mortice locks for Cupboards types A, B, C and D.

Providing and fixing of tack board/soft board of thickness 12mm as per design given by consultant rates are including of wooden beading of side.

Providing and fixing of White Board of size 2400mm X 1300mm with 8mm th. Frosted glass having smooth finish along with Black Board of size 1200mm X 1300mm with 8mm th. Frosted glass having etched finish along with grid lines etched for graph and two coats of enamel paint at the back. Teak wood support of 20mm x 20mm to be provided at the back of the board. Teak wood beading 6mm x 20mm to be provided at the edges of the board. Chalk holder along with studs and fasteners for the supports of the board should be provided. The materials to be used should be of approved make. The hardware should be of approved make. The sample should be approved by the consultant as per the detailed specifications in the drawing and as directed by the EIC. Items shall be completely operational.

Providing and fixing of Stage A of size 3693mm X 1893mm x 200mm supported by 25 x 25 x 3.2 mm SHS MS section space frame fixed to the floor with 19mm th. plywood surfaces having solid 15 mm th. solid teakwood flooring on top. The inside surfaces should be of lacquer polish and the outside surfaces should be of lacquer polish along with melamine polish coating on it. The materials to be used should be of approved make. The hardware should be of approved make. The sample should be approved by the consultant as per the detailed specifications in the drawing and as directed by the EIC. Items shall be completely operational.

Providing and fixing Lectern of size 600mm X 550mm x1200mm having 19mm th. IS 710 plywood cabinet with dimensions 280mm x 504mm x 1112mm. The cabinet is horizontally divided into two parts of heights 290mm and 804mm by 19mm th. IS 710 plywood. The cabinet has 12mm th. plywood shutters. All visible exterior surfaces of the lectern should be covered with 1 mm th. laminate. The whole internal surfaces of plywood shall be lacquer polished. The longer shutters shall be provided with SS D-shaped handles with mortice lock externally and tower bolt internally on the opposite shutter. The shorter shutters shall be given aluminium knobs. 25 x 25 x3.2 mm MS SHS is to be provided at the all the corners and in the center of the total height. Teakwood Edge strips are to be provided at the corners of the lectern. The materials to be used should be of approved make. The hardware should be of approved make. The sample should be approved by the consultant as per the detailed specifications in the drawing and as directed by the EIC. Items shall be completely operational.

Providing, fixing and installing on site Roller Blinds using Sergei Ferrari or quivalant Fabric of specified color fixed to channel with clamp at a position operated manually by hand sytem. Colour, texture, details and manufacturing company, etc to be approved by the consultant/Engineer in charge. Approved Hardware Make : Grorich Horivert or equivalent.

Providing and fixing of Table type 3 - 1167mm (L) x 1167mm (B) x 750mm (H) supported by 32 x 32 x 3.2mm SHS MS frame, connected with 21.3 mm diameter circular hollow section at the bottom, with 16 gauge perforated sheet in front and 19 mm th. marine plywood working surface having 1 mm thick laminate with anti - baterial, heat resistance and abrasion resistance properties in front and polish at the back. The working surface shall be supported on one side by 31 x 31 x 3.2 mm L angle and covered by 3 mm th. acrylic sheet . 45 mm th. Teak wood edge beading with melamine polish over base coat of lacquer polish is to be provided on 2 edges of the desk and 53mm dia. Cable Manager and Switchboard on the surface. CPU shelfs of 19 mm th. marine plywood at the bottom having 1 mm th. laminate with anti baterial, heat resistance and abrasion resistance properties on top and lacquer polished below with 6 mm th. teakwood beading at the edges suspended from 25 x 25 x 3.2 L angle using 12mm diameter SS rod. The sides and top of the shelf shall be covered with 16 gauge MS perforated sheet and 16 MS metal sheet respectively. The back of the shelfs shall be covered with 12 mm th. marine plywood with provision for switchboard. 40 x 40 x 3.2 mm wiring conduits seggregated for data & electrical wiring with rubberized insulation on the inside shall be provided under the table surface. The materials to be used should be of approved make. The hardware should be of approved make. The sample should be approved by the consultant/ Engineer in charge as per the detailed specifications in the drawing and as directed by the EIC . Items shall be completely operational.

Providing and fixing Visitor Chair with the seat and back made up of 1.2 cm thick hot pressed plywood measured as per QA method described and upholstered with fabric and moulded polyurethane foam with PVC lipping all around. The back foam is designed with countoured lumbar support for extra effort. Back Size: 49.5 cm x 45.5 cm. Seat Size: 49.5 cm x 43 cm. The HR polyurethane foam is moulded with density 45 +/- 2 kg/m3 and hardness load 16 +/- 2 kgf as per IS:7888 for 25% compression. The one-piece armrests made of black integral skin polyurethane with 50-70 shore hardness and reinforced with MS insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat armrest connecting bracket made of 0.3 +/- 0.022 cm thk HR steel. The understructure is made of 2.54 cm dia x 0.2 cm thk MS ERW tube and black powder coated (40 - 60 microns), etc. complete. Including GST as directed by Engineer-in-Charge Approved Make Miller/Haworth/Knoll Godrej /Herman or equivalent

Supplying & Placing Stool with seat assembly : the seat should be made up of 12 : 0.1 cm thick flat plywood and with moulded polyurethane foam and should be upholstered with replaceable synthetic leather covers , seat size : diameter 40.0 cm adjustments : 360 ° revolving typeback , assembly : the back foam should be designed with contoured lumbar support for extra comfort the upholstery should be available in synthetic leather back size : 45.0 cm ( w ) covered with polyurethane foam high resilience ( hr ) polyurethane foam the_hr polyurethane foam should be moulded with density = 45 + 1-2 kg / m3 and hardness load 16 = 2 kgf for 25 % compressionheight adjustment the manual height adjustment should be very easy to operate with a help of a knob . it can be easily locked at the most comfortable position pedestal assembly the five - prong pedestal should be fabricated from 0.2 + 0.02 cm thick hr sheet :( should be dd 1079 / hr ) , powder coated ( oft 40-60 microns ) and fitted with an injection moulded black polypropylene hub cap and 5 nos , twin wheel castors . the pedestal should be 55.0 + 0.5cm pitch - circle - diameter- ( 65.0 + -1,0cm - with - castors ) , - circular - foot - ring of 052 0 + 0.2cm made up of 01.9 + 0.2 x 0.120.0096cm thk ms erw tube for foot support in high - base stool twin wheel castors : the twin wheel castors should be injection moulded in black nylon etc. complete . Including GST as directed by Engineer - in - Charge Approved Make : Godrej / Herman Miller / Haworth / Knoll or equivalent

Providing and fixing glass door cupboard shall have an overall size of 916mm(W)x486mm(D)x 1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8 mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA 'D' grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) etc. complete. Including GST as directed by Engineer-in-charge. Approved Make - Godrej/Herman/ Miller/ Haworth/Knoll or equivalent

Supplying and fixing Revolving Aero mid back Synchro adjustable armrest, black chair with seat/back assembly : synchro Mechanism. The 360° swivel alongwith knee tilt synchro mechanism with three different tilt position supports healthy body movements and gives great back support. Mesh Back : The back is made up of injection moulded glass filled nylon & upholstered using mesh fabric with high tenacity yarn given the perfect balance between form, functionality and comfort etc. complete as directed by Engineer-in-charge Approved make - Godrej/ Herman/ Miller/Haworth/ Knoll or equivalent

Providing and fixing Plywood 6mm thick in Partitons including fixing with 75 x 30mm size teak wood Vertical & Horizontal Center to Center 450mm frame, beading, screws with openable Door and paintings two coat primer etc. complete as directed by Engineer-in-charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Providing, supplying and placing magnetic whiteboard dimension 90 x 120 cm with build in wall hinges, clips, shipped in a high strength customized packaging for maximum protection installation and maintenance instructions mentioned on the back side of the board as complete including GST, transportation, other taxes etc and as directed by Engineer-in-charge. Approved Make : Godrej Herman Miller / Haworth / Knoll or equivalent

Electrification Works Point wiring for Light/ Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ ceiling complete with 6A Modular type switch/ bell push & accessories and earth continuity of following type, erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose/ H.D. Connector as directed. with oval conduit /pvc casing capping double lock type Cat.III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ flushed on wall/ ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/ Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on/ in wall/ ceiling as per pipe erected. with necessary ceiling rose/ H.D. Connector as directed. with oval conduit /pvc casing capping double lock type Cat.III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate, modules erected with necessary connection as desired by Engineer In charge One No. SP 6 Amp. Cat.III

One No. 5 pin plug Cat.III

Blank Plate Single Cat.III

16 Amp. SP one way switch Cat.III

6/16Amp. Universal socket Cat.III

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size 25mm.

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in/ flushed on wall/ ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with oval conduit/ pvc casing capping double lock type 3 wire 1.5 sq. mm

3 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in/ on wall/ ceiling with 2.5 sq.mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size with oval conduit/ pvc casing capping double lock type 4 wire 4 sq. mm

4 wire 6 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used) Single phase 8 way SS Double door

Single phase 12 way SS Double door

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 40Amp. Cat.III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 40Amp. Cat.III

Supplying & erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size 4 core 4 Sq.mm

Supplying & erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size 4 core 6 Sq.mm

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s. 1200mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with Making the site as original.

Supplying, Installation, Testing & Commissioning of 18W. LED Suface mounted round downlight with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation (CW/WW) make: Bajaj Cat. Code: BGSLO SLEEK SURFACE 18W WH RD / Philips/ Bajaj/ Crompton or equivalent as directed by Engineer-In-charge. (incl. GST)

SRISHTI ENTERPRISES