PROVN OF WORK SERVICES FOR INSTALLATION OF INTEGRATED PERIMETER SECURITY SYSTEM (IPSS) AT AFS HASIMARA

Amount

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate 'Z' sections and other section of approved make conforming to IS-733 and IS-1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/neoprene gasket. aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws, complete all as specified and directed.

S&F anodised aluminium door shutters, powder coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. powder coating of any colour, complete all as specified and directed.

S&F for 3mm thick wooden finishes ACP sheet in panels of aluminium frame including all nessessary fittings, complete all as specified and directed.

S&F 5.5mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beading in square n.exc 0.5 sqm in each pane, complete all as specified and directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in surface tupe PVC conduit, medium grade, (ISI marked), heavy duty of adequate size including its accessories not less than 20mm dia rigid PVC conduit, medium grade, ISI marked including all conduit accessories with and including concealed modular box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to common earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 6.00 here-in before but for one 3 pin 5 Amps socket outlet point on same board, complete all as specified and directed.

All as per item No 6.00 here-in before but for one 3 pin 5 Amps socket outlet point on the independent board, complete all as specified and directed.

All as per item No. 6.00 here-in before but with 4 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one switch socket combination 6 pin 5/15 Amp on independent board including PVC insulated 4 Sqmm FRLSH type copper multi stranded conductor as earth wire, complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 6 Amps, 230 volts, complete all as specified and directed.

S&F switch socket combination, 5 pin, 5/6 Amp, 230 volts, flush type, complete all as specified and directed.

S&F switch socket combination, 6 pin, 15/16 Amp, 230 volts, flush type, complete all as specified and directed.

S&F socket outlet, flush type, 5 pin, 5/6 Amp, 230 volts, complete all as specified and directed.

S&F exhaust fan, made of steel body complete with louvers shutter, 230V, 50Hz, RPM 1200, copper winding of size 300mm sweep with blades, including necessary wall cutting for fixing exahaust fan and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site , completes all as specified and directed.

S&F ceiling rose of size 65 x 50mm, surface bakelite, three terminal, completes all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, aluminium housing, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistan complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, complete all as specified and directed. (Make : Crompton Cat No. TRP-415-30-57-SL-LM-NBK or Bajaj Cat No. ENXTP 30L WH PO PC SD or Philips Cat No. BRP330LED30CW RSN PC PSU S1 V1)

S&F in replacement recessed mounted LED light fittings 36 watt (size 4' x 1'), white/warm white colour (4500 K to 6500 K) ultra modern LED edgelit luminaire suitable for armstrong/grip/POP ceiling complete with seperate electronic driver and high brightess LED including LED lamp and connecting up with three core 2.5 Sqmm upto nearest point, complete all as specified and directed. (Make : Philips Cat No. RC380BLED36S-6500 G5L12W3 PSU OD or Orient Electric Cat No LT SAQ-36-C-1 x 4-FC or Bajaj Cat No. BZSSLL 36L LED WHI)

S & F 10 W LED bulk head light fitting, comprising of connector galvanised cast iron back plate, weather proof, IP 65 protection with electronic driver, (latest design), upper PVC body including one 10 W LED lamp, complete all as specified and directed.

Supply, laying and testing XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core, complete all as specified and directed.

Supply, laying and testing XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth and n. exc. 10 Sqm on plan, for foundation of pole/stay, or cable trenches etc and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm outer dia conforming to IS, approved colour complete with fittings, for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 120mm outer dia conforming to IS, approved colour complete with fittings, for cable protection, complete all as specified and directed.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

M&L for earthing of equipment complete with copper earth plate electrode 60 × 60cm × 3.15mm thick , buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel in any type of soil, connected to earthing test point and and necessary excavation and earth work, PCC (1:2:6) type C-1 as earth pit with MS angle iron frame 40 x 40 x 6mm and 40mm thick pre-cast RCC (1:2:4) type B-1 cover slab size 400 x 400 x 50mm reinforced with 8mm dia TMT bar, 75mm c/c both ways including one handle made of 12mm dia including providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including Copper earth strip 20 x 3.00mm, protected by 40mm bore (medium grade) galvanized iron pipe up to earthing test point including disposal of soil to a distance not exc 50 mtr and necessary testing on completion, complete all as specified and directed. Note:- (i) Proper earthing pit shall be provided with pit cover. (ii) Copper earth strip beyond 7.5 mtr shall be measured and paid seperately.

Supply, Installation, testing and commissioning of 30 KVA online UPS with CRCA enclosure, IP 42, input and output voltage 230-400 volt, AC three phase (4wire + G), input frequency 40 to 70 Hz output frequency 50/60 Hz, power factor > 0.99 including sealed maintenance free battery bank with suitable number of battery to cater the full load for 30 minute minimum back up time along with FRP made battery rack/stand with adequate shelf as required to accommodate all battery, 5 color touch display for input and output voltage, DC voltage output, frequency, % battery back up etc, LED indicator for mains on, battery on, charge, low battery imminent, load in inverter, load in auxiliary supply etc, electrical protection, input/output/under volt, over temperature, over load, short circuit and battery low trip sure protection, inbuilt over voltage cutoff device etc, inbuilt isolation transformer between UPS output and main supply, integration of UPS with battery bank etc, complete all as specified and directed.

Supply & Installation of advance encapsulated compound based CPRI tested maintenance free, pipe-in- pipe technology upgraded (Zinc & Alloy Coated), ZINC COATED (80-100) microns with pure Zinc(99.9%) & alloy coating (200- 250)microns. Earthing System confirming IS 3043.The outer and inner pipe should be 76.2mm & 41.9mm dia, 3mtrs Length, Zinc coated with additional special alloy coating 300mm on the topside for additional protection of the Terminal. The annular space between the pipes being filled up with compact filled (Crystalline on the topside for additional protection of the Terminal. The annular space between the pipes being filled up with compact filled (Crystalline Conductive |Compound). The compact filled mixture which is machine pressed in the pipes should not disintegrate or collapse when outer pipe corrodes. The inner pipe should be extended with terminals for connectivity, The job includes digging the pits and refilling the same by baron corrodes. The inner pipe should be extended with terminals for connectivity, The job includes digging the pits and refilling the same by baron Conduct lite Back Fill Earth Enhancing Carbon Based Conductive Concrete compound, The Back Fill Compound should be Electronically Conductive with Noncorrosive Properties & Environmentally Neutral Material. Conduct lite Back Fill Compound shall be suitable to be installed in either slurry or dry form and shall not be mixed with any soil / cement etc while pouring in the bore hole, So that it improves conductivity of the earth electrode and ground contact area, BFC of 25 kgs a bag and installation of following components, complete all as specified and directed. INSTALLATION: (a) Installation in black cotton or garden soil-1/2 Bag with 2m Electrode & 2/3 Bag with 3m Electrode. (b) Installation in Harsh - Rocky/Sandy Soil Condition - For installation of 2 M Earth Electrode (1 Electrode with 3 to 4 bags BFC of 25 kgs bag) & for 3 M Earth Electrode (4 to 5 bags BFC of 25 kgs bag) depending on soil condition to be mixed with soil & additional electrodes to be installed & interconnected for lowering soil resistivity in excavated pit. (c) The buried Conductors (GI/Copper/Aluminium) are to be covered by 50mm thick layer of conduct lite for additional protection of conductors & better conductivity to lower the resistivity of soil & bring down earth resistance.

M&L for earthing complete with GI earth plate electrode 60 × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work PCC (1:3:6) type C-1 as earth pit with MS angle iron frame 40 x 40 x 6mm and 40mm thick pre-cast RCC (1:2:4) type B-1 cover slab size 400 x 400 x 50mm reinforced with 8mm dia TMT bar, 75mm c/c both ways including one handle made of 12mm dia including providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect, including galvanised iron earth strip 32 x 6mm, protected by 40mm bore (light grade) galvanized iron pipe up to earthing test point as directed, incl disposal of spoil to a distance not exc. 50 mtr and necessary testing on completion, complete all as specified and as directed. Note : (i) Proper earthing pit shall be provided with pit cover. (ii) GI earth strip beyond 7.5 mtr shall be measured and paid seperately.

S & F air termination, single pointed copper rod 12mm dia and 300mm long with necessary supporting insulators & PCC block, complete all as specified and directed

S & F test point termination block of size 75mm × 75mm × 25mm made of gum metal or phospherous bronze drilled and screwed including 3 Nos, 8mm dia 25mm long hexagonal headed screw and box of size 90mm × 90mm × 90mm (made out of 1.6mm thick plain brass sheet) and screwed to wall for protection of test point, complete all as specified and directed. (Note :- Copper strip & test point should be bonded by brazing.)

S & F copper earth strip of size 20 x 3.00mm with saddles and fixing screws etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator on wall for down conductor, complete all as specified and directed

S & F GI earth strip of size 32 x 6mm with saddles and fixing screws etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator on wall for down conductor, complete all as specified and directed

S & F galvanized steel earth wire 4mm dia drawn in conduit/pipe, complete all as specified and directed

S & F porcelain vitreous white/brown/green spacers insulator of size 75mm x 35mm x 40mm height complete with one number GI stud bolts 6mm dia, 40mm long including nut & washers and two number GI fixing bolts of size 6mm dia and 50mm long including washers and drilling holes for holding /fixing aluminium strip/roof conductor, as required, complete all as specified and directed.

M&L for 50mm bore GI tubing, light grade, with necessary fittings, ISI marked, fixed complete of roof slab/wall/pavement etc, complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor cable, 6 Sqmm 1100 volts grade, FRLSH type, drawn in and including heavy duty concealed PVC rigid conduit (ISI marked) not less than 20mm dia with its fixing accessories including 6 Sqmm 1100 volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(i) Three runs of cable and one run PVC conduit and its accessories shall be measured as one length of sub main. (ii) Cutting chases for conduits and sinking of boxes included making good to distrubed surfaces shall deemed to be included in the unit quoted rate.

M&L for submain wiring (three phase) with four single core PVC insulated unsheathed, multistranded flexible copper conductor cable, 6 Sqmm 1100 volts grade, FRLSH type, drawn in and including heavy duty concealed PVC rigid conduit (ISI marked) not less than 25mm dia with its fixing accessories including two single core 6 Sqmm 1100 volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(i) Six runs of cable and one run PVC conduit and its accessories shall be measured as one length of sub main. (ii) Cutting chases for conduits and sinking of boxes included making good to distrubed surfaces shall deemed to be included in the unit quoted rate.

M&L for submain wiring with single core PVC insulated unsheathed, multistranded flexible copper conductor cable, 4 Sqmm 1100 volts grade, FRLSH type, drawn in and including heavy duty concealed PVC rigid conduit (ISI marked) not less than 20mm dia with its fixing accessories including 4 Sqmm 1100 volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(i) Three runs of cable and one run PVC conduit and its accessories shall be measured as one length of sub main. (ii) Cutting chases for conduits and sinking of boxes included making good to distrubed surfaces shall deemed to be included in the unit quoted rate.

Supply, installation, testing and commissioning of split type Air conditioning units 2 TR indoor and outdoor complete with cordless remote control unit and with 5 star rated and EER 3.2/BLDC type compressor unit with non CFC refrigerant, auto swing, LED display, noise level not more than 42 dB function, comlete with all piping arrangement etc, complete all as specified and directed. Note : (i) Condensate drain pipe of best quality to be provided and fixed in suitable manner till ground level/i.e 11.0 Mtr (approx) fixed on wall/floor/ceiling and unit quoted rate shall deemed to be included for the provision of same. (ii) The quoted rate also includes necessary fixing arragement for indoor and outdoor units and copper tubing of 11.00 mtr length (approx), brazing, welding including insulation, complete charging of refrigerator gas upto required level and filling the cavities on wall, setting of grill alignment.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilizied at 230 V with accuaracy of + 2.5% and of capacity 15 Amp fixed on wall including connection with AC, complete all as specified and directed.

S&F water cooler electric driven (single phase), having approx storage capacity of 80 litres and nominal cooling capacity of 40 litres per hour including making PCC mounting floor with making duct of waste water, suitable length of OVC connection to be connected nearby water pipe line with nipple, elbow etc, complete all as specified and directed.

S&F power unit suitable for load max upto 3.5 KW including sockets 25 Amps and 04 module box for mounting of power unit and power socket, complete as specified and directed.

S&F of MCCB TPN, 100 Amp, with brakin capacity 16 KA, 4 pole, 415 Volt, Ics = 100% Icu, with over load and short circuit protection 50 Hz with thermal magnetic protection unit including fixing arrangement in LT panel/bus bar box and testing, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, epoxy powder coated, made out of CRCA sheet Single Pole & Neutral (SPN), suitable for 12 way, 240 volts, IP 43 & IK 09 with metal door, 250 Amps copper busbar, fixed on wall with din rail, neutral and earth bar, fixed in proper position, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 40 to 63 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing , complete all as specified and directed.

S&F sheet metal enclosure for double door MCCB DBs, phosphatised, made out of CRCA sheet, epoxy powder coated, suitable for VTPN 12 way, 240 volts, IP 43 & IK 09 with metal door, 250 Amps copper busbar, fixed on wall with din rail, neutral and earth bar, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 40 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing , complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing, complete all as specified and directed.

S&F heavy duty air circulator wall fan 600mm sweep, with 3 core flexible copper cable of suitable size upto ceiling rose alongwith fixing acessories, complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) , completes all as specified and directed.

S&F 600mm x 600mm LED luminaire 36 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. (Make : Bajaj Cat No. BPRF 36W WH SL LED or Crompton Cat No. LCTLR P-36-FO-CDL or Havells Cat No. PLAN02 x 2PLR 36WLED857 TAPSPOP)

M/S. NARENDRA KUMAR GARG (BID ID -3293050)

M/S BISHAL ENTERPRISES (BID ID -3292998)

M/S ROY ENTERPRISE (BID ID -3293476)

BHARAT ELECTRIC (BID ID -3293511)

M/S. KUMAR CONSTRUCTION CO. (BID ID -3293137)

B L SHARMA (BID ID -3293444)

M/S SARDAR MAL NAHATA (BID ID -3293321)