saraswati

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m :As per D.S.R 2.8.1

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per D.S.R 4.1.8

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :5.2.2

Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).As per D.S.R 5.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) As per D.S.R 6.1.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) As per D.S.R 6.4.2

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. As per D.S.R 5.22.6

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) As per D.S.R 13.4.2

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes As per D.S.R 10.16.1

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size of Tile 600 x 600 mm As per D.S.R 11.41A.1.1

9.21.1 - Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.127.2 - Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm13.45.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 13.41.1

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture As per D.S.R 13.48.3

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete As per D.S.R 5.9.1

Supply of Informatory M.S. Sign. Board Size 1200x900mm made of 18 gauge M.S. Sheet fixed in ISA 40x40x5 mm. frame by flat iron 40x5mm. on all four sides along with two vertical post of 2150mm. long from bottom to frame of angle iron 40x40x5 mm. with 150mm. horizontal hold fast at bottom braced with 40x5mm. flat iron 1980mm. long electrically welded and painted with one coat of redoxide primer.Rates Sanction SE/RED RS. 4200/-+writting and fixing.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc. for mass concrete As per D.S.R 5.9.5

Wiring point for light 1.0 Sqr mm FRLSH PVC insulated multistrand single core copper conducror cable in PVC conduite pipe concealed in the wall complete with 1.5 Sqm. FRLSH insulated copper conductor cable as earth continuity wire, piano type switch & ceiling rose/angle/battern holder on 3mm thick phenolic laminated backelite sheet etc. complete in all respect as directed including matching colour wash.SI No. 131C

Wiring point for Plug (5A) 1.0 Sqmm FR L.S.H. PVC insulated multistrand single core copper conducror cable in PVC conduite pipe concealed in the wall complete with 1.5 Sq mm PVC insulated multistrand copper conductor cable earth continuity wire ,piano type switch & socket on 3mm thick phenolic backelite sheet etc. complete inall respect SI No. 134C

Wiring point for fan /fresh air fan (light duty exhaust fan)with 1.5 sq.mm.FRLSH PVC insulated multistrand singlecore copper conductor cable in PVC pipe on surface complete with 14 SWG copperearth continuity wire, piano type switch & ceiling rose on3 mm. thick phenolic laminated backelite sheet etc,complete in all respect. SI No. 123C

Supply & wiring of sub main with two Number 2.5 Sqmm. PVC insulated 1100 V multistrand single core copper conductor cable in 20mm dia PVC conduite pipe concealed in wall with1No 1.5 Sq mm PVC FR L.S.H. P.V.C. insulated multistrand copper as earth earth continuity wire. SI No -1304C

Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfactionof Engineer in charge of work. SI No. 1203C

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.SI.NO 1139 (A)

Supply of 48 inch ceiling fan 1200 mm Approved CompneyS.I No 1501(i)

Supply & fixing of 6 wait to 8 wait led down lighter S.I. No. 1401 CAT-A

Note- GST Shall be paid extra as per Rule Signature of Contractor