REPAIRS TO WOODEN, PVC DOOR / WINDOW, MODULAR KITCHEN, WALL CLADDING, POST ANTI TERMITE TREATMENT AND OTHER B/R WORKS UNDER AGE B/R (WEST) AT COLABA UNDER GE (W) COLABA, MUMBAI

Amount

M&L for providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes, etc. in apron all as specified and directed.

M&L for providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coursed sand) to match the existing floor all as specified and directed.

M&L for providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

M&L for injecting chemical GLYPHOSATE 41 percent solution 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water) and removing the plants/vegetation with penetrated roots, including all necessary scafolding arrangments upto 04 storeys height of bldgs all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ plants with above treatment to the entire satisfaction of Engineer-in-Charge.

M&L for Injecting chemical GLYPHOSATE 41 percent solution 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water) and removing the plants/vegetation with penetrated roots, including all necessary scafolding arrangments from 05 to 08 storeys height of bldgs all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ plants with above treatment to the entire satisfaction of Engineer-in-Charge.

M&L for Injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots including all necessary scafolding arrangments from 09 to 12 storeys height of bldgs all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ plants with above treatment to the entire satisfaction of Engineer-in-Charge.

M&L for 15 MM thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surfaces even & smooth without using extra cement including taking down all as specified and as directed. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

MM&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint all as specified and directed.

Demolition of wall/ceiling boards of any description, and of any thickness including cover fillets and frame work all as specified and directed.

M&L for 8/10 mm thick PVC ceiling or wall panelling (of any colour) with aluminium frame work for receiving ceiling board / wall panelling including all necessary accessories for fixing at various levels all as specified and directed.

S&F for Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards all as specified & directed.

S&F in repairs 9 feet pulley operated colth drying system, aluminium anodised 20mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make :- Easy dry or other equivalent make as approved by GE.

Taking down Chowkats and shutters of door/ windows/ventilators with wire mesh / glass and MS grills of any size including all fittings and fixtures all as specified and directed.

M&L for providing and fixing factory made uPVC rigid coloured three track sliding window, made of extruded profiles. Profiles of frames and sash will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arragement for fixing hardware, EPDM gasket, 1.2+- 0.2 mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100-mm long fasteners all as specified and directed.

S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, glazing, screws, handles, hinges, tower bolts etc. complete all as specified and directed. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work with wall, and including matching the existing surface area.

S&F factory made 35 mm thick 2nd hard wood plain framed panelled shutters (any numbers of panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc. sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.

S&F 2nd class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge, etc. with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator styles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face veneer with lipping/frame to match on both side all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads including any height of building and scaffolding complete all as specified & directed .

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm each pane at any height of building and scaffolding complete all as specified & directed.

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beading in squares n exc 0.50 sqm in each pane all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) each not exceeding 1.50 Sqm each all as specified and directed.

S&F PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per specification and all as per drawing. Make :- M/s Sintex Industries Ltd, M/s Rajshree Plastiwood Ltd,

S&F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and as per drawing. Make :- M/s Sintex Industries Ltd, M/s Rajshree Plastiwood Ltd,

S&F factory made single extruded WPC (Wood Polymer Composite) solid door frames/chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum specification as per IS 15931: 2012 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engr-in-Charge. Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof specification as per IS 15931: 2012 and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and as directed. Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F stainless steel pressed handles, oval type, designer of 150 mm size for doors all as specified and directed.

S&F extruded aluminium alloy handles 150 mm, fabricated type, anodized all as specified and directed.

S&F extruded aluminium alloy barrel tower bolts, with bright bolt and fixed of size 200 mm for doors all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm size all as specified and directed.

S&F butt hinges of size 100 mm, medium weight, stainless steel min 3 mm thick for doors of design all as specified and directed.

All as per item No 37 above but of size 75 mm L-type all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of 300 mm size all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over and including 15mm thick cement mortar (1:6) all as specified and as directed.

M&L for granite stone (of any approved colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6) all as specified and as directed.

S&F in repairs sink without drainage board made of stainless steel, 1 mm thick, 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 535mm x 455mm x 203mm glossy all as specified and directed. Make : Cera domino Cat part No B4511103 or equivelant in Nirali / Prayag.

S&F in repair stainless steel double bowl bitchen sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe all as specified and directed. Make : Cera domino Cat part No B4511103 or equivelant of Bluestar/Nirali / Prayag.

S&F in repairs GI tubing 15mm bore, medium grade, with all fittings and fixtures fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F in repair 15 mm bore fancy type Sink brass mixer with flexible neck dual flow hot/cold facility chrome tap cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- Kohler/ Jaquar / Cera.

M&L in repairs 15 mm bore fancy type CP Sink flexible sink tap dual flow chrome tap cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- Kohler/ Jaquar / Cera.

S&F in repairs 15 mm bore fancy type sink cock (wall mounted) with 150 mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Cera Cat Part No F 2003253 or Equivalent of Jaquar

M&L in repais for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including screed bed or bedding layer of morter 15 mm thick in CM (1:6) for laying floor finishes all as specified and directed. Make : HR Johnson / Rakceramics / Kajaria.

M&L in repairs glazed tiles digital coloured ceramic tiles 300 x 450 x 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry & pointed in coloured cement to match the shades of the tiles laid over and including rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Make : HR Johnson / Rakceramics / Kajaria.

S&F in repairs 18 to 19 mm thick HDHMR board, prelaminated one side with decorative choice lamination exterior grade, fixed with screws to frame work as in cup board & kitchen cabinet shutters and all other similar works all as specified and directed. Make: Action Tesla/ Green Ply/ Century Ply

S&F in repairs 18mm thick Marine Plywood laminated of any colour with High glossy acrylic sheet of 3mm thick, grade I as per IS 14587, for frame and shutter for kitchen cabinets all as specified and directed by Engr-in-charge.

M&L in repair 25 mm thick block board, interior grade with pre-lminated decorative face veneer and exterior face laminate on both faces fixed with nails to timber work as in kitchen cup board shelves and shutters and all other similar works including 1st class teak wood lipping over cut surfaces all as specified and directed.

S&F Plastic tyres and steel ball bearing 25 mm dia with load capacity 40 Kg cabinet drawer roller all as specified and directed by Engr-in-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F in repairs stainless steel cabinet drawer multi lock single latch 40 mm size fixed complete all as specified and directed by Engr-In-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F in repairs 50 mm magnet PVC coating MS cabinet drawer Magnet all as specified and directed by Engr-in-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F in repairs MS with black coating 550 mm long with load capacity 40 Kg cabinet drawer channel fixing with screws all as specified and directed by Engr-in-charge (For built in cup boards). Make: Door set/sleek(Asian Paints) or equivalent as approved by GE.

S&F in repairs Anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment all as specified and directed. Note :- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd. as per design No. DG 102 , 7.5mm size i.e. 6mm thick and 7.5mm wide or approved design in M/s Royal grill / National grill.

S&F in repairs stainless steel cabinet magnetic catcher with plate (sample as approved by GE), fixed with screws etc all as specified and directed.

S&F in repairs Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed. Make : Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs round stainless steel cabinet / drawers knobs 25mm dia (sample as approved by GE) all as specified and directed.

S&F in repairs stainless steel cabinet / drawer handle size 200mm of any shape all as specified and directed. Make : Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs stainless steel modular thali - plate basket SS 304 size of 520 x 485 x 200 mm, heavy duty and grade steel with finish of zinc corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat part No 6168 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs stainless steel modular perforated cutlery basket SS 304 of size 52 x 48.5 x 10 cm heavy duty and grade steel with finish of zinc corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat Part No 6162 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs stainless steel glass tray plate tray having length of 610mm all as specified and directed. Make : Cat Part No. 5796 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs stainless steel triple cutlery inserts having length of 500mm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed. Make : Cat Part No. 6408 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs stainless steel hanging spice rack having three shelf spaces length of 500mm all as specified and directed. Make : Cat Part No 4970 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs Stainless Steel Grain Trolley SS 304 having size of 525 x 485 x 350 mm with heavy duty and grade steel with finish of zinc corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat part No 6175 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs Stainless Steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steel with finish of zinc corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. Make : Cat part No 4340 of Godrej Kitchen appliances or other equivalent as approved by GE.

S&F in repairs stainless steel hanging spice rack having three shelf spaces length of 500mm all as specified and directed. Make : Cat Part No-4970 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S&F in repairs stainless steel 304 grade Size 180x515x485 mm pull out detergent rack Cat No ASSEDP180510485 having two shelf spaces with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed. Make: Godrej Kitchen Appliances or equivalent as approved by GE.

Demolition and breaking up drain pipes 75/110mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar from any height of bldgs including use of scafloding all as specified and directed

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height of bldg including necessary scaffolding all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding all as specified and as directed by Engineer-in-Charge.

S&F in repairs WHB/Kitchen sink collapsible waste pipe out let upto Nahani trap all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) , 110mm bore, Double socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, any location,any floor including necessary scaffolding complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and as directed by Engineer-in-Charge.

SRI SAIRAM COUNSTRUCTION

GANGAJAL

Frends Enterprises

SN CONSTRUCTION

ASHOK CONSTRUCTION

Bidder Name

Unitech Enterprises

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

SN CONSTRUCTION

GANGAJAL