REPAIRS, MAINTENANCE TO INTERNAL WIRING, CEILING FANS, EXHAUST FANS, WALL MOUNTING FANS AND GEYSERS AND SUBMAIN WIRING, DBS, MCBS, MCCBS, LIGHT FITTINGS AND FIXTURES, EARTHING AND ALLIED WORKS AT ZONE C AND E AREA UNDER GE CHENNAI

Amount

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One fan point controlled by one switch through regulator.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.

One light point controlled by two No. 2 way switches.

One bell/ buzzer point controlled by one bell push.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through existing conduit concealed In wall/ floor and fixed on ceiling/ roof etc, including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified and directed for:-

One light point controlled by one switch.

One fan point controlled by one switch through regulator.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.

One light point controlled by two No. 2 way switches.

One bell/ buzzer point controlled by one bell push.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through existing conduit in wall/ floor and fixed on ceiling/ roof etc., including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two runs for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new PVC casing and capping of size 25 x 16mm with accessories fixed on surfaces of wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified and directed for:-

One light point controlled by one switch

One fan point controlled by one switch through regulator.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch

One light point controlled by two No. 2 way switches

One bell/ buzzer point controlled by one bell push

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two runs for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including PVC casing and capping of suitable size with accessories fixed on surfaces of wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board.

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts including taking down old damaged switch complete all as specified and directed.

Supply and fix switch piano, flush type, single pole, two way, 5 Amps, 230 volts all as specified and directed.

Supply and fix switch piano, flush type, single pole, two way, 5 Amps, 230 volts including taking down old damaged switch complete all as specified and directed.

Supply and fix switch piano, flush type, single pole, one way, 15 Amps, 230 volts all as specified and directed.

Supply and fix switch piano, flush type, single pole, one way, 15 Amps, 230 volts including taking down old damaged switch complete all as specified and directed.

Supply and fix bell push, flush type, single pole, 5 Amps, AC, 230 volts all as specified and directed.

Supply and fix bell push, flush type, single pole, 5 Amps, AC, 230 volts including taking down old damaged Bell push complete all as specified and directed.

Supply and fix call bell of multi music type, single pole, AC, 230 volts including taking down old damaged Call Bell complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 5 Amps, 230 volts including taking down old damaged socket any type complete all as specified and directed.

Supply and fix socket outlet, 3 pin 15 Amps, flush type, 230 volts all as specified and directed.

Supply and fix socket outlet, 3 pin 15 Amps, flush type, 230 volts including taking down old damaged socket any type complete all as specified and directed.

Supply and fix switch socket combination, 2 in 1, 5 Amps, 230 volts flush type all as specified and directed.

Supply and fix switch socket combination, 2 in 1, 5 Amps, 230 volts flush type including taking down old damaged switch socket combination any type complete all as specified and directed.

Supply and fix switch socket combination flush type, 2 in 1, 15 Amps, flush type, 230 volts all as specified and directed.

Supply and fix switch socket combination flush type, 2 in 1, 15 Amps, flush type, 230 volts including taking down old damaged switch socket combination any type complete all as specified and directed.

Supply and fix switch socket combination flush type, 3 pin 15 Amps and 3 pin 5 Amps, 230 volts, 5 in 1, multipurpose, universal type all as specified and directed.

Supply and fix switch socket combination flush type, 3 pin 15 Amps and 3 pin 5 Amps, 230 volts, 5 in 1, multipurpose, universal type including taking down old damaged switch socket combination any type complete all as specified and directed.

Supply and fix electronic ceiling fan regulator, flush type, 300 Watts all as specified and directed.

Supply and fix electronic ceiling fan regulator, flush type, 300 Watts including taking down old damaged fan regulator any type complete all as specified and directed.

Supply and fix modular fan regulator, step type, 120 Watt, 2-module including taking down old damaged fan regulator any type complete all as specified and directed.

Supply and fix ceiling rose PVC/ Polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix ceiling rose PVC/ Polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase including taking down old damaged ceiling rose complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fittings/ angle holder as required taking down old damaged lamp holder complete all as specified and directed.

Supply and fix new electronic choke of 36 W, 230V, AC including taking down the old unserviceable/ defective choke complete all as specified and directed.

Supply and fix new electronic choke of 28 W, 230V, AC including taking down the old unserviceable/ defective choke complete all as specified and directed.

Supply and fix new electronic choke of 18 W, 230V, AC including taking down the old unserviceable/ defective choke complete all as specified and directed.

Supply and fix new electronic choke of 11 W, 230V, AC including taking down the old unserviceable/ defective choke complete all as specified and directed.

Supply and fix modular switches suitable for AC 230V, 6 amps and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

Supply and fix modular sockets suitable for AC 230V, 6 amps and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

Supply and fix modular switches suitable for AC 230V, 16 amps and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

Supply and fix modular power sockets suitable for AC 230V, 16 amps and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

Taking down carefully, dismantling and opening the following fans of any size/ any make after disconnecting the electric connection for attending repairs, reassembling, refixing and re-connecting the fans to ceiling rose/connector after necessary servicing and replacing the spare parts etc., complete all as specified and as directed:- Note: (i) Supply only of spares and painting will be measured separately. (ii) Servicing like cleaning, application of lubricant oil/ grease, replacement of pins, nuts, bolts etc is deemed to be included in the quoted rates.

Ceiling fan any sweep

Exhaust fan any sweep

Wall mounting fan air circulator of any sweep.

Rewinding for the following sweep of fans of any make/ type with super enamelled copper wire of suitable size to get designed speed for the particular make of fans including insulating varnishing, providing sleeves etc., complete all as specified and as directed:- Note: All spare parts and painting shall be measured and paid separately.

Ceiling fan 1200 mm sweep

Ceiling fan 1400 mm sweep

Wall mounting fan air circulator of any sweep.

Exhaust fan 300mm sweep

Exhaust fan 375 to 450mm sweep

Supply only condenser 2.5 Mfd capacity for any make/ sweep/ type of fans, conforming to relevant IS specification and as directed.

Supply only condenser 4 Mfd capacity for any make/ sweep/ type of fans, conforming to relevant IS specification and as directed

Supply only ball bearing of size 6201 suitable for any make/ sweep/ type of fans, conforming to relevant IS specification. Make: SKF/ TATA/ NBC

Supply only ball bearing of size 6202 suitable for any make/ sweep/ type of fans conforming to relevant IS specification. Make: SKF/ TATA/ NBC

Supply only ball bearing of size 6203 suitable for any make/ sweep/ type of fans conforming to relevant IS specification. Make: SKF/ TATA/ NBC

Supply only gun metal bush for any make/ sweep / type of fans.

Supply only canopy plastic with fixing arrangement, top and bottom for ceiling fan of any make/ sweep as specified and directed.

Supply only rubber bush real type suitable for 1200/ 1400/ 1500mm sweep ceilings fans of any make as specified and directed.

Supply only steel shaft for the motor suitable for any make of fans/ sweep/ type complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint with gun spray for any sweep/ make of ceiling/ wall mounting fans including filling the cavities with filler after cleaning, scraping all dust/ rust on fans/ down rods/ blades etc., and numbering the fans "MES NO" with black enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint with gun spray for any sweep/ make/ type of exhaust fans including filling the cavities with filler after cleaning, scraping all dust/ rust on fans/ down rods/ blades etc. and numbering the fans "MES NO" with black enamel paint complete all as specified and directed.

Supply only down rod 15mm bore made out of galvanised iron with complete provision for hanging ceiling fan including cutting, threading at both ends and making suitable holes for inserting split pins/ cotter pins including suitable check nuts and necessary clamps socket with insulating rubber bush complete all as specified and directed.

Taking down carefully storage type water heater (Geyser) of any type and any make upto 50 Litre capacity after disconnecting all electric connection; descaling the inner container, heating element, base assembly etc. by using diluted hydrochloric acid and cleaning thoroughly, filling the inner container with water and checking and arresting leakage if any, reassembling the geyser after servicing and replacing unserviceable spare parts and refixing including making water connections and testing on completion complete all as specified and directed. Notes: (i) Spare parts like heating element, thermostats, hot/ cold water lines, PVC connections etc., shall be measured and pair separately. (ii) Painting shall be measured and paid separately.

Taking down the copper/ steel inner container of the geysers and replacing the worn out brass studs and copper tubing for the following capacity geysers complete all as specified and directed:-

Geysers of capacity 25 Ltrs

Geysers of capacity 50 Ltrs

Supply only heating element 2 KW capacity suitable for AC single phase 50Hz, 230 Volts suitable for geysers for thread type/ press type/ triangular/ circular type all specified and as directed.

Supply only heating element 1.5KW capacity suitable for AC single phase 50Hz, 230 Volts suitable for geysers for thread type/ press type/ triangular/ circular type all specified and as directed.

Supply only thermostat automatic cut off with ISI mark suitable to geysers of any range from 20° C to 90° C all as specified and directed.

Supply only hot water steel guarded PVC connection pipe 450mm long with self locking nut at both ends suitable for 15mm bore outlet all as specified and directed.

Supply only cold water steel guarded PVC connection pipe 450mm long with self locking nut at both ends suitable for 15mm bore outlet all as specified and directed.

M&L for applying one coat of synthetic enamel paint white or brown tint as directed by spraying to the geysers including cleaning the dust/ rust from the body and numbering the geysers 'MES No' with black enamel paint complete all as specified and directed.

Supply only phase indicating neon lamp round or rectangular type suitable for single phase 230 volts, 50Hz AC for respective make of the geysers. Note: Set of two lamps containing green and red colour shall be counted as one unit.

Supply only non return valve 15mm bore of gun metal conforming to relevant IS specification all as specified and directed.

Supply only pressure relief valve 15mm bore of gun metal and conforming to relevant IS specification all as specified and directed.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through existing conduit fixed on walls/ floors/ ceilings etc. alongwith one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type complete all as specified and directed. Note : Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor shall be considered as one unit length.

M&L for submain wiring complete with four runs of 10 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 32mm external dia fixed on walls/ floors/ ceilings etc., alongwith conduit fittings and accessories, with one run of 10 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit complete all as specified and directed. Note: Four runs of 10sqmm multistranded cable, one run of 10 sqmm cable and one run of PVC conduit shall be considered as one unit length.

M&L for submain wiring complete with four runs of 10 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through existing conduit fixed on walls/ floors/ ceilings etc. with one run of 10 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring complete all as specified and directed. Note : Four runs of 10 sqmm multistranded cable and one run of 10 sqmm cable shall be considered as one unit length.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 6 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 6 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 4 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing isolator TPN, 100 Amps, 415 volts including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB TPN, 63 Amps, 415 V of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB TPN, 32 Amps, 415 V of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB SPN, 63 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB SPN, 40 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB SPN, 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 32 Amps, 230 Volts including taking down old one complete all as specified and directed.

Supply and fix 22 watts LED light fitting surface and wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including taking down old fitting complete all as specified and directed. Make: Havells cat No. ENDURALINERNEOBS22WLED865SPCWH or equivalent from Philips/ CG.

Supply and fix 10 watts LED light fitting surface and wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including taking down old fitting complete all as specified and directed. Make: Havells cat No. ENDURALINERNEOBS10WLED865SPCWH or equivalent of other specified makes.

Supply and fix 20 Watts LED ultra bright glare LED tubelight with very high efficiency suited for installation in existing T8 fitting with G13 lamp holders with double side connection including taking down old tubelight complete all as specified and directed. Make: Havells cat No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent of other specified makes.

Supply and fix 10 Watts LED surface mounted downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. INTEGRANEOSURFACEDLS10WLED840S or equivalent of other specified makes.

Supply and fix environmental friendly, ultra modern, energy saving, surface mounted 10 Watts LED decorative oval bulkhead edge-lit LED luminaire comprising of high brightness including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. RUGBYNEONFT 10WLED860SSYMTOPC or equivalent of other specified makes.

Supply and fix 42 Watts environment friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for 2' x 2'grid ceiling including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. PLUTONEO2X2 PLR42WLED840S of Havells or equivalent of other specified makes.

Supply and fix 15 watts LED recess mounted downlighter with pressure die-cast aluminium heat sink and polycarbonate diffuser in white powder coated finish with integrated driver including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. INTEGRANEODLR15WLED840S or equivalent of other specified makes. Note for item No. 84 to 90: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Supply and fix 07 Watts LED lamp including taking down fuse lamps complete all as specified and directed. Note: New LED lamp shall bear the CA No. and Year written by permanent marker pen .

Supply and fix 10 Watts LED lamp including taking down fuse lamps complete all as specified and as directed. Note: New LED lamp shall bear the CA No. and Year written by permanent marker pen .

Supply, fix, connecting and testing MCCB four pole 125 Amps, 415 volts breaking capacity, 16kA with adjustable thermal and fixed magnetic setting conforming to IS: 13947-II including taking down the existing one complete all as specified and as directed.

Supply, fix, connecting and testing MCCB four pole 100 Amps, 415 volts of breaking capacity, 16kA with adjustable thermal and fixed magnetic setting conforming to IS: 13947-II including taking down the existing one complete all as specified and as directed.

Supply and fix 42 watts LED drive suitable for Armstrong/ Grid ceiling including taking down the old damaged drive complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized iron earth wire of 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES Schedule (Part I) (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 meter long for earth strip including PCC (1:3:6), type C-1 pit with 40mm thick precast RCC (1:2:4), type B -1 cover reinforced with 12mm dia MS bars @ 150mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia light grade, common salt, charcoal filling in layers as specified, necessary excavation and earth work in any type of soil etc., complete all as specified and as directed.

RK ENTERPRISES

SRI LAKSHMI ASSOCIATES

DPS sales and services india

PSK Enterprises

SIRITEL SYSTEMS PRIVATE LIMITED

Banyan Engineers and Contractors