SPECIAL REPAIRS TO BLDG NO P-35, P-42 AND PROVN OF CERTAIN MINOR WORKS AT AREA UNDER GE KAMPTEE.

Amount

Dismantling floor, hearth or wall tiling including cement mortar, bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 300mm x 450mm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile including backing coat of 10mm in CM 1:4 complete all as specified and directed.

M&L for non-skid colour ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over & including 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

All as per item No 4 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ blankets any thickness, including cover fillets complete all as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595x595x4mm fixed or laid /inserted to GI frame work with screws/clips as in ceiling laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.3mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.3mm thick with height 32mm and cross approx 1200mm centre to centre with GI cleat and steel expansion fasterners, including drilling holes for 4mm dia GI wire suspender and clips etc all as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling baords shall be measured separately. (ii) The grid system shall be as per specification of make as specified and directed.

S&F in repairs GI tubing 15mm bore, medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

S&F GI tubing 15mm bore medium grade, with all fittings and fixed to wall complete all as specified and directed.

S&F in repairs GI tubing 20mm bore medium grade, with all fittings and fixed to wall including taking up or down steel tubing and connection and complete all as specified and directed.

S&F GI tubing 20mm bore medium grade, with all fittings and fixed to wall complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10cm girth in cement mortar 1:3 complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel, chromium plated or aluminimised hinging device complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including fixing of waste pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including bracket etc complete all as specified and directed.

S&F in repairs bib tap 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs swan neck pillar tap 15mm dia, cast copper alloy with capstan heads chromium screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut complete all as specified and directed. Make:- Prayag Cat No 7414 or equivalent.

S&F in repair health faucet of chromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make:- Prayag Cat No BEA-90 or equivalent.

S&F in repair PVC connection 15mm dia, 450mm long including PTMT check nut complete all as specified and directed.

S&F in repairs stop valve 15mm dia, cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.

S&F stop valve/angle cock 15mm dia, cast copper alloy, chromium plated, fancy type high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

S&F vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and urinal spreader complete all as specified and directed.

S&F chromium plated towel rail with glossy finish complete all as specified and directed. Make:- Prayag Cat No BA-80 or equivalent.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws etc complete all as specified and directed. Make:- Prayag Cat No BA-35 or equivalent.

S&F as in repair corner sheet glass shelf 300mm assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag Cat No BEA-44 or equivalent.

S&F in repair toilet paper holder, chromium plated, box type, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make:- Prayag Cat No BA-38 or equivalent.

Demolition of brick work built in cement mortar including all quions arches, pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius (Using old size brick) built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plastering including roots of trees and trees of any girth desription on brick or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper on wall over a coat of chalk whiting primer surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and prepation of old decorated surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment including preparation of old plastered surfaces on wall of any description and applying two coats of oil bound distemper over a coat of chalk whiting primer & wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying with three coat of white wash over wall surfaces complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

S&F anodised aluminium frame for door, windows, ventilator with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

Supply, Fabrication and fixing anodised Aluminium windows, ventilators shutters, side hung type without sash bars, alumiium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packings, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. Note:- Glazing/gauzing shall be measured and paid for separately under respective items.

M&L for 5 to 6mm thick coloured/ fancy type glass good quality and glazing complete all specified and as directed.

Supply, Fabrication and fixing anodised Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screw etc including necessary jointing cleats, glazing clips, anodised aluminium beading etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items.

S&F aluminium grill for windows in approved design/pattern by Engineer-in-Charge fixed with aluminium beading complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

M&L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of new or previousaly untreated surface steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube & fixing in opening complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded PVC sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long mild steel, medium weight, cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 125mm extruded aluminium handles, fabricated type anodised etc complete all as specified and directed.

S&F 125mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm, nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

Demolition of concrete in ground floor & paving not exc 15cm thick above or below ground level complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No 59 above but 5mm dia and over upto and including 10mm dia as in stirrups spacers and binders complete all as specified and directed.

M&L for use & waste of form work to sides and soffits of floor or roof beams, haunching, girders, bressumers, lintels, cantilevers, shelves etc complete all as specified and directed.

M&L for cement concrete M-25 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m clear span complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type- B1 (using 20mm graded stone aggregate) for flooring finished even & smooth with using extra cement complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), finished even & smooth without using extra cement as in plinth protection including bitumen/ mast filling in the joint complete all as specified and directed.

M&L for glossy finish machine pressed precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment finished with coloured rubber finish on top finished over stone dust cushion of 30mm thick complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in coping, water troughs and the likes, including weathering slightly, rounded or chamfered angles and throating complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrogated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridges, velly gutter, cladding to wall, etc made to shape as reqd and fixed with J hooks or screwed complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000ltr hoisted and fixed in position including PTMT ball valve 20mm and top cover including dismantling of water tank as specified in SSR Part I complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m in depth and 1.5m in width and getting out in hard/ dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm as in hard and dense soil and making good to the surface complete all as specified and directed.

S&F convex mirror made of PC material provided 1000mm dia with suitable MS pipe post, duly powered coated for road turning, intersections, curves T Junctions Hospital, Parking lots etc and also ideal for surveillance. It should have clear & definite mirror image having 130 degree of viewing angle. It should be unbreakable & stronger than glass complete all as specified and directed. Make:- ALCOLITE Cat No AL-704 or equivalent.

M&L for cement concrete type C1, 1:3:6 (using 20mm graded stone aggregate) as in foundation, filling of pipes complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material exc 250m but not exc 500m and depositing where directed as in soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Taking down unserviceable point wiring with copper / aluminium conductor cable of (light, fan, plug & power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell / buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls / floor etc to macth with existing surfaces including white washing / colour washing /distempering complete all as specified and as directed.

Taking down old unserviceable MCB, sheet metal enclosure, DB, main switch etc and making good distrubed sufaces of wall complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring of any size/ capacity and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking medium grade on surface of wall/ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of size 1.50 sqmm pressed steel terminal modular boxes sunk on wall for mounting of switches switch sockets fan regulator etc including modular white cover plate suitable for mounting modular switches, sockets, fan regulator etc complete all as specified and making good to distrubed surfaces for one light point controlled by one, one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, cieling roses and holders shall be connected to common earth dolly.

All as per item No 84 above but one ceiling /exhaust/ wall mounted fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 84 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 84 above but one 3 pin 5 amp socket out point on independent board complete all as specified and directed.

All as per item No 84 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L sub main wiring 1100 volts grade single core FRLSH PVC insulated and unsheathed cable with two run of stranded, copper conductor 4 Sqmm drawn in and including electrical grade PVC conduit IS 9537 (Part-III) 1983 marling medium grade Sutface in wall/ceiling including PVC insulated unsheathd earth wire one run with copper conductor of size 4 sqmm, concealed metal boxes sunk on wall for mounting of switches switch sockets fan regulator etc complete all as specified & directed for one light point or fan point controlled by one switch. Note:- The rate quoted shall be deemed to have included for cutting chasing and plastering as required etc. and making good for concealed wiring. Accessories for point / sub main wiring like PVC junction box, bend, tee, elbow shall be of same make.

All as per item No 89 above but 2 x 2.5 sqmm with earth wire of 1 x 2.5 sqmm complete all as specified and directed.

S&F socket, modular type, one module, one way, 6/16 amps, 240 volts fixed on and including independent board complete all as specified and directed.

S&F switch, modular type, one module, one way, 16 amps, 240 volts fixed on and including independent board complete all as specified and directed.

S&F modular switch, one way, 16A, 1 module, 250 V, AC complete all as specified and directed.

S&F modular switch, one way, 6A, 1 module, 250 V, AC complete all as specified and directed.

S&F modular socket, 6A/ 16A, 2/3 pin combined, 2 module, 250 V, AC complete all as specified and directed.

S&F modular socket, 6A, 2/3 pin combined, 2 module, 250 V, AC complete all as specified and directed.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F modular type fan regulators, step type, 240 volts, 100 watts, 2 module single pole complete all as specified and directed.

S&F LED light fitting surface mounted bulk head luminaries 9-12W with min 800 lumen, IP 65, aluminium housing, surge protection including drivers etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. Make:- Philips Cat No Endura LED 10W, Luker Cat No LBKOVSL04, C&S Cat No Sirus 10W, CG Cat No LBH 10W.

S&F building security light LED 20-25W with lumen output 2000 with driver with rated voltage 240V, 50Hz including mounting GI, made out of 25mm dia light grade pipe 0.8m bent to shape including FI clamps nut bolts etc complete all as specified and directed. Make:- Philips Cat No BRP022 LED 20CW, CG Cat No LSTS-25-CDL, Luker Cat No LST24 WH.

S&F LED baton fitting 2' length including drivers having energy consumption 9/11W, 230V, 50Hz, 6500K not less than 800 lumens prewired complete all as specified and directed. Make:- Philips cat No Smart bright LED 10S, Crompton Cat No LCTLN-10-CDL, Luker Cat No LT509 WH.

S&F 18/20W LED batten fitting complete including tube rod, driver, rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable complete all as specified and directed. Make:- Philips cat No Smartbright LED 20S, CG Cat No LCTLN-20-CDL, Luker Cat No LT824 WH.

S&F in repairs LED post top made in cast aluminium spigot housing with decorative opel acrylic diffuser and IP 65 protection including driver with 3 core copper wire till connector complete all as specified and directed. Make:- CG Cat No LPTOI-45-CDL or equivalent in Philips / Wipro.

S&F LED downlighter 18W, 240V, 50 Hz, surface mounted with driver and 2 core 1 sqmm copper conductor cable complete all as specified and directed. Make:- CG Cat No LCDEP-18-CDL or equivalent in Philips / Wipro.

S&F sheet metal enclosure, single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB, SP, 6 to 40 amps, 240 volts, 10 KA, 'C' series complete all as specified and directed.

S&F MCB single pole & neutral, 240 volt, 6 to 40 amps, 10 KA complete all as specified and directed.

S&F water heater storage type electric, 25 Ltr capacity with 5 star rating ,single phase 230 V.50 Hz electric complete including grouting with nut bolts. PVC threaded tough flexible pipe/ tubing of standard length for inlet/outlet connections complete all as specified and directed. Make:- Havells/ Bajaj/ CG.

S&F 15mm bore stop valves, fancy type, cast chromium plated, high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

M&L for cutting existing steel tubing for alteration or additions of 20mm dia with tee complete all as specified and directed.

Taking down carefully ceiling fan with down rod complete of 1200/1400m sweep from fan hook, dismantling blade, cleaning, servicing, painting with two coats of enamel paint, marking MES number and refixing & connecting with 3 core copper cable complete all as specified and as directed.

S&F wall mounted air circulator fan 450mm sweep, complete with twin core, 1 sqmm wire for connection complete all as specified and as directed.

S&F exhaust fan, single phase, 230V, 50Hz, 300mm sweep, heavy duty metallic, with making holes, grouting etc complete all as specified and as directed.

S&F voltage stabilizer of capacity of 2 KVA, for automatic operation of single phase, air cooled, indoor wall mounted type and designed for input variation between 170 Volts to 250 volts output stabilize between 230 volts with accuracy of 2.5% complete all as specified and directed. Make:- Voltas, LG, V Guard.

Supply, install and testing of deep freezer, electric driven (single phase, horizontal type) storage type having storage capcity of 320 Ltrs with glass top, double door complete all as specified and directed. Make:- Voltas/ LG/ Samsung/ Blue Star.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 2.5 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade/PVC caping casing, concealed in wall /ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 2.5 sqmm pressed steel terminal boxes/ modular boxes sunk on wall for mounting of any type (modular) switches, switch sockets, fan regulator etc including or modular cover with frame any size complete all as specified and making good to disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Supply, erecting & fixing in repair steel tubular sweged pole complete with base plate, pole cap, nuts bolts washers etc 9 meters long type 410 SP-31 sweged poles conforming to IS 2713 (part -I to III) 1980 all as specified including two coats of black bitumen paint through out internally and externally up to planting depth and appilying two coat of red oxide primer (externally) and Numbering of poles as directed including excavation/earth work, PCC 1:4:8 type D-2 using 40mm aggregate for pole foundation of size 600x600x1650mm height upto ground level and using PCC 1:2:4 B-1 for coping with size 450x450x350mm including necessary formwork complete all as specified and as directed.

S&F LED flood light luminaires of capcity 120 watts with PDC housing with IP 66 protection, heat resistant tempered glass for protection with 5 KV surge protection complete with driver, suitable size GI bracket, 1.5 sqmm 3 core multistranded copper wire for connection from street light fitting to junction box, fixing with 30x5 mm flat iron clamps nuts, bolts, washers and fixing accessories complete all as specified and directed.

Supply and laying in trenches or fixing to walls / poles or drawing through pipe, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4 core including testing after laid and jointed complete all as specified and directed. Make:- Polycab / Havells / Finolex.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 63mm outer diameter and 51mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed. Make:- Dura Line / Tijaria / REX.

M&L for earthing complete with galvanised steet earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminium lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe upto 7.50 metre long for protection of earthing lead. (f) Reguisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.46,438.00]

M/s B S Jain

M/s Jagdish Staioners and General Stores

khushal constructions

Bidder Name

DEESHA CONSTRUCTIONS

khushal constructions

M/s B S Jain

M/s Jagdish Staioners and General Stores