GE (W)/HSR-51/2024-25 PERIODICAL SERVICES OF BOUNDARY WALL AT HISAR MIL STN

Amount

Demolition Brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L brick work with Sub Class 'B' bricks straight or curved on plan exc 6.0m mean radius built in cm 1:4 complete all as specified and as directed.

Description all as per item No 2.00 above here in before but except bricks all as specified complete all as specified and as directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with mechanical scrappers or any other means and preparation of old plastered or unplastered surfaces of wall including applying two coats of cement based paint over a coat of primer complete all as directed and specified.

M&L for preparation of newely plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with mechanical scrappers or any other means and preparation of old plastered or unplastered surfaces of wall including applying two coats of weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces having 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on walls complete all as specified and directed.

M&L for washing rubbing down and stopping of painted surfaces on walls by scrapping with scrappers or any other means and preparation of old plastered or unplastered surfaces of wall complete all as specified and directed.

M&L for applying a coat of cement based paint on old plastered surfaces including preparation of walls complete all as specified and directed.

M & L for applying single coat of weather coat having 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces on walls complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removal rubbish outside MOD land ect complete all as specified and directed .

M & L rendering 15mm thick on fair faces of brick work in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L rendering 12mm thick in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L rough cast plaster mixture consisting of crushed stone or fine gravel aggregate size 6 to12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even on external wall upto cill height complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of wall and applying one coats of white wash complete all as specified and directed.

Wire netting of galvanized steel wire 0.91 mm dia fixed with tinned tacks of wire staples size of mesh 20 mm as in wall plaster repair works complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete.

M&L of precast cement concrete louvres and jallies, 25mm thick Type B0 1:2:4 (12.5mm graded agg.)(measured solid) in repair, including all mould but excluding frame Set in CM 1:4 including dismantling of existing jallies of any pattern in repair complete all as specified and directed.

S&F for pre cast post for jaffri jalli of 1:2:4 type B-0 (12.5mm graded aggragate) of decorative type having size 60cm to 75cm height and fixed in repair complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of existing stone slabs and of any description of thickness in floors; complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete fixed in repairs including dismantling/demolition of existing kerb stone and carry out necessary excavation for fixing of new kerb stone complete all as specified and directed.

Panting of kerb stone in new or previously untreated surface with white/black paint any descripation of one coat of primer over two coat synthetic enamal paint of over 10 cm grith (or) width complete all as specified and directed.

Panting of kerb stone in old surface with white/black paint any description of one coat plastic emulsion of over 10 cm grith (or) width complete all as specified and directed.

M&L for Painting lines, dashes, arrows, letters,etc. on roads, pavements and the like exc 10cm wide with Thermoplastic paint 2mm thick with glass beading for reflection paint, white or golden yellow complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

M&L Formwork to edges of concrete flats, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as sepcified and directed.

M&L formwork to sides of pillars, post, struts, piers, columns and stanchions complete all as specified and directed.

M&L RCC M-20(Nominal Mix) in slabs supported on walls, beams and columns complete all as specified and directed.

M&L RCC M-20 foundations, including rafts, footings, foundaiton beams, plinth beams; bases for column etc, basements slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-20 using 20mm graded aggregate in columns, pillars, piers, posts and sturts complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Dismantling laid bedded and pointed in cement motar Stone slabs and tiles of any description or thickness in floors,walls etc complete all as specified and directed.

M& L 20 mm thick Granite of any type work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 10 mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

M& L 20 mm thick Dholpur pink stone (size 30 cm x 60 cm) pillars or walls in cement mortar 10 mm thick (1:4) including pointing in white cement (1:2) using stone dust with admixture of pigment to match with shade of pink dholpur stone and stainless steel studs minimum two nos for one tile complete all as specified and directed. Note :- 1. Height of fixing of stone up to 12 mtr. 2. Stainless steel studs to be measured and paid on respective item.

S & F Stainless steel studs (size- 8 mm dia and 125 mm long) for fixing Dholpur stone on wall complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 410-W (Gde -E-250) quality-A including dismatling for the same complete all as specified and directed.

Dismantling of Mild Steel Gate of area exc 2.5 sqm and n.exc 7.5 sqm carefully removed from the site for making good in shape by removing bends and giving necessary welding wherever required. If any bend or broken in hold fast/Pintol hinges found to be corrected and fixed in place. Cleaning and greasing the gate for smooth functioning and apply single coat of synthetic enamel paint over steel surfaces and re-fixing in its own position complete all as specified and as directed. Note : - (i) if any extra MS angle or flat iron used in gate to being in shape will be measured separately as supply only. (ii) Hold fast, pintol hinges, sliding bolt, tower bold etc if any repalced will be measured separately as supply only.

Supply only MS angle or flat iron conform to Fe 290 Gde E-165 complete all as specified and directed.

M&L for heavy duty gate pulley/track wheel of any size can withstand weight of 250kg/wheel of revolving gate wheel 360o suitable for turning, sliding/revolving gate including shaft complete fixed in repair all as specified and as directed.

M & L to remove any buildup of rust or dirt present on the tracks of revolving gates using a soft bristled brush and a cleaning solution free from solvents or harsh chemicals. Lubricate the wheels, hinges and bolts with a Silicone based or lithium based grease for ease to open and close the MS gate complete all as specified and as directed.

M & L Painting steel surface of any description over 10 cm width and girth including preparation of old painted surfaces of a coat of synthetic enamel paints complete all as specified and as directed.

B B BUILDERS (BID ID -3156092)

PRINCE CONSTRUCTION (BID ID -3156525)

Siya constructions (BID ID -3156381)

malik constructions (BID ID -3156362)

Balaji Construction Co. (BID ID -3157136)

m/s krishna engineers1 (BID ID -3152136)

DHARMA CONSTRUCTION (BID ID -3151206)

SHRI HARI BUILDERS (BID ID -3157175)

m/s Ravindra Traders (BID ID -3151930)