REPAIR TO JOINERY FLOORING PLASTERING SANITARY FIITINGS AND MISC WORK IN BLDGS AT AMAR VIHAR OF DGQA AND SQAE AREA G PLUS 6 STORY BLDGS AT ANAND PARBAT IN THE AREA OF AGE B R II UNDER GE NORTH DELHI CANTT 10

Amount

M&L for light shade vitrified tiles 10mm thick in floors etc, area of each tile not exc 0.36sqm, set and jointed in neat cement slurry and pointed with white or coloured cement with pigment to match the shade of tile, over and including screed bed 15mm thick in CM 1:6 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. (Rate = 29.20+817.10+83.50=929.80)

All as per ser Item No-1 here -in-before but on vertical surface as in dados/skirting over 10mm thick rendering as backing coat in CM 1:4 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. (Rate = 29.20+817.10+44.20+91.10=981.60)

M&L glazed ceramic coloured tiles 450mm x 300 mm x 7mm to 8 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. (Rate = 29.20+615.90+91.10=736.20)

M&L for non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm and not exc 0.18Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding,backing and dispose rubbish out off the premises complete all as specified and directed. (Rate = 29.20+636.10+83.50=748.80)

M&L for 15 mm thick cement plastering over brick wall in cement mortar 1:6 finished even and smooth without using extra cement complete and including taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc.completeall as specified (Rate = 77.30+20.40+12.50+28.80=139.00)

M&L chipping of spoilled and loose ceiling plaster/concrete and cleaning rust from reinforcement, scrubbing down concrete surface with wire brushes and cleaning with water and allowed to dry and applying a layer of SBR (latex) as primer on exposed surface and fixing of steel welded mesh by welding/tightened with the existing reinforcement, and then applying 25mm thick CM in 1:3 mix with SBR (latex) as per manufacturer instruction complete all as specified and directed. (welded mesh will be paid separately)

M&L for rendering 5mm thick in cement mortar 1:3 on any faces of concrete / brick finished even and smooth without using extra cement in ceiling complete all as specified. (Rate = 103.10-26.8+12.50=88.80)

Supply only Welded steel wire fabric of weight per square metre n exc 4Kg. Complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall and applying 3 mm thick wall care putty two or more coat to get eeven and smooth surface (Birla white or equivalent) and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.. (Rate = 0.60+5.50+17.10+10.9+24.40=58.50)

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. (Rate = 0.90+6.40+17.10+2.3+10.9+1.30+26.90=65.80)

Complete removal of existing treatment of wall and applying average 3 mm thick wall care putty two or more coat to get even and smooth surface and making the wall surface / Jambs/ Corners even and smooth and applying two coats of oil bound distemper over a coat a primer complete all as specified and directed.(Rate =1.00+2.70+5.50+17.10+10.90+24.40=61.60)

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc.complete and applying one coats of oil bound distemper on ceiling complete all as specified and directed. (Rate = 1.40+2.00+17.10+2.3= 22.80)

Taking down chowkats or frames with shutters (without taking off shutters from the frames)of any descriptions not exc 1.5 sqm each complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) etc.complete all as specified.

S&F Rolled mild steel Framed work ~Fe-410 - W (Gde-E-250)quailty-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete all as specifed and directed.

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F for 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing wire cloth etc,sizes of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed.

S&F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. (Rate = 434.7+9.80=444.50)

Re-securing or easing & adjusting, and refixing in same opening after cutting from bottem including taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each in the same opening complete all as specified and directed. (Rate = 35+67.30+29.40=131.70)

S&F Solid PVC factory made door frame of size 50x47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed.

M & L 30 MM thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER" consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 X 19mm for styles and 15 X 15mm for the top and bottom rails, M.S frame shall have a coat of metal primer of approved make and manufacture . M.S.frame shall be covered with heat moulded PVC ‘C’ channel made from 5mm (±0.25) thick sheet of Density 600 Kg /Cbm manufactured by an ISO- 9001-2015 certified company, of size 30mm thickness, 50mm width to form styles and 5mm (±0.25) thick and 75 mm wide PVC sheet for the top rail, lock rail and bottom rail on either side of the panel . An additional 5mm (±0.25) thick PVC strip of 20mm width is to be stuck on the bottom side of the 'c' channel . Panelling of 5mm (±0.25) thick PVC sheet to be fitted inside the M.S frame welded/sealed to the styles and rails with 5mm (±0.25) x 30mm PVC sheet beading on either side and joined togther with solvent cement adhesive etc., 10mm thick ( 5mm (±0.25) x 2nos.) , 20mm wide cross PVC sheet as gap insert for the top rail & bottom rail. Door to be fixed to frames with 3 nos. M.S powder coated butt hinges of size 100mm*25MM*2mm using 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws, Complete as per direction of Engineer-in-Charge. Make : Rajshri

M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. (Rate = 6.00+12.70+19.6+19.60=57.90)

M & L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. (Rate = 8.10+19.60=27.70)

M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. (Rate = 5+14+19.6+19.6=58.20)

M & L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. (Rate = 7.90+19.60=27.50)

S&F for 200mm long aluminium anodised, barrel tower bolt , extruded section complete all as specified.

S&F for 150mm long aluminium anodised, barrel tower bolt , extruded section complete all as specified.

S&F 100 mm long medium weight, cold rolled stainless steel Butt hinges complete all as specified and directed.

S&F for 150mm size extruded aluminium handle, fabricated type, anodised complete all as specified and directed.

S&F for 125mm size extruded aluminium handle, fabricated type, anodised complete all as specified and directed.

S& F 250 mm long Aluminium alloy, anodised , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F in repairs, Aluminium (Die Cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. (Rate=724.4+15.9=740.30)

S & F in repair Floor door stopper 150 mm (overall length of cover plate) of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. Rate = (42.60+2.60=45.20)

S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx 'B'

S&F for aluminium anodised powder coated Deco grill (DG-104), 10mm wide with U shape snap beading complete all as specified and directed.

S & F aluminum anodised powder coated frame for doors, windows, vantilator with one or more rebates including joining cleat for fixing etc. Complete all as specified.(Rate = 233.50+16.00= 249.50)

S & F aluminum anodised powder coated window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws etc. Complete all as specified. (Rate = 979.80+16=995.80)

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane completed all as specified and directed.

M&L in repair brass coated aluminium decorative curtain rod 20mm dia of make VISTA or eqv. including brackets, side knobs and fixed to wall complete all as specified and directed.

S&F in 15mm bore tubes medium grade galvanized ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking down all as specified. (Rate = 116.60+8.80=125.40)

S&F in 20 mm bore tubes medium grade galvanized ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking down all as specified. Note- The work to be got executed in G+6 bldg and rates are inclusive of necessary scaffolding and safety measures as required at site. (Rate = 153.8+10.60=164.40)

S & F in repairs, fancy type, chromium plated, long body, bib taps, 15mm bore with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all specified and directed. (Make :- Jaquar cat part no. CON-041 KN).or Prayag Cat Part No - 9312.

S& F 15 mm dia CP Central hole basin Mixture swivel type for mixing hot and cold water with regular spout without pop up waste system with 450mm long braided Hoses (Cat Part No : CON-167KNB) (Make :- Jaquar or equvelant).

S & F in repairs CP wall mixer 3 in 1 with telephonic shower fancy type all as specified. (Cat part no : FLR-5271 N) (Make :- Jaquar or equvelant).

S & F in repairs chromium plated shower head rose with or without swivel joints any size including fixing to steel pipe or union Complete all as specified.(C at Part No : OHS 35495,SHA 483) (Make :- Jaquar or equvelant).

S & F in repair CP toilet paper holder complete all as specified (Make :- Jaquar or equvelant).

S&F in repair frameless looking mirror size 600 mm x 450 mm and 5 mm thick, fixing with 4 holes & complete accessories complete all as specified and directed. Make : Modi Float or equivalent

S&F in repair of corner glass self of 5.5mm thick (3 Pcs set) with chromium plated guard bar fixed to wall all as specified and directed by Engr in charge. (Cat Part No : CAN 1173) (Make :- Jaquar or equvelant).

S&F in repair of sheet glass shelf 18'' X 5'' of 5.5mm thick with chromium plated guard bar fixed to wall all as specified and directed by Engr in Charge.Cat Part No SB-9831 Make:- Shakti or equvelant model of make as per Appendix.

S&F in repair CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge Make Jaquar (AKP-35731P) or Prayag Cat Part No BA - 25.

S & F in repair CP Towel rack consisting of three rod of size 60cm long, fixed to wall with suitable rawl plug all as specified and directed (Cat Part No : ACN 1181FHN) (Make :- Jaquar or equivalent

S&F in repair 20mm dia brass CP Tubular towel rail , D type, 60cm long between flanges complete all as specified and directed.

S & F in repair Towel ring of PTMT fixed with and including chromium plated brass screws and wooden /lastic cleats. (minimum weight 90 gms)

S&F in repairs Vitreous China wash basin, white, flat back, size 600x480mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed. (Rate = 963.50+97.60=1061.10)

M & L in repair 32mm bore brass CP bottle traps for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap. all as specified and directed. (Rate=479.2+19.60=498.80)

S&F in repiar white composite pattern vitreous china wash down water closet pan with P trap or S trap (pedestal pattern, model "Gemma/Rosehip" of any colour, twin flush system including soft close seat cover all as specified and directed. Cat Part No. for S trap- GS/WC/1013 and for P trap GS/WC/1008 or Hind Ware Cat Part No - 92072 model Cedar.

S & F in repairs CP hygienic spray (2 in 1 facucet with 1.5M long tube) complete all as specified.

S&F In repair angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. (Make :-Hindware or eq,).

S & F in repair 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified . Make Jaquar (CON -089 KN)or Prayag Cat Part No - 9418

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

Demolition of cement concrete( sunken portion) in any of description and in any position not other wise specially provided , all as directed and specified.

M&L in preperation of existing sunkun portion cleanig , wire brushing removing all unwanted material, filling of loose masonary ,joints hollow portion with polymer modified cement mortars & applying Ist coats of smart care Damp Block 2K of Asian paint or Equavalent ( as per manufacturing instruction) @1.5 Kg/sqm ( for two coat) over necked surface, laying of a 150mm wide strip of an open woven glass fiber mesh at the junction and corners over grean surfaces of smart care of asian paints or equvalant. apllying IInd coat of smart care Damp Block 2K after 4-6 hrs gap of Ist coat . Sprinkle coarse sand over IInd coat for proper bonding of cement plaster , complete all as specified and directed .

M & L PCC type E-2 1:5:10 ( 40mm Brick aggt) in sub base of floor, or in Sunken portion complete all as specified and directed.

M & L PCC type D-2 1:4:8 ( 40mm graded stone aggt) in sub base of floor complete all as specified and directed.

M & L PCC type B1,1:2:4 ( 20mm graded stone aggt) in roof slab or in Sunken Portion as leveling course using WPC comlete all as specified and directed (WPC will measured and paid seperatly)

S&F 32mm GI pipe as in spout pipe in sunken Portion fixed in PCC 1:2:4 type B0 complete all as specified and directed.

S&F in 75mm bore Cast iron soil,waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors complete and including dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. (Rate = 595.00+36.40=631.4

S&F 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in 75mm bore Cast iron soil,waste and vent pipes, in any length with or without ears, with cement joints,fixed in walls complete and including dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. (Rate = 654.5+36.40= 690.9

S&F 75mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type ) or with parallel branches including filled the distirb the hole with pcc 1:2:4 type b0 using WPC complete all as specified and directed.

S&F in 100mm bore Cast iron soil,waste and vent pipes, in any length with or without ears, with cement joints,fixed in walls complete and including dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. (Rate = 752.20+36.40=788.60

S&F 100mm bore Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type ) or with parallel branches including filled the distirb the hole with pcc 1:2:4 type b0 using WPC complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and refixing the same complete all as specified and directed. (Rate = 70.0+36.40=106.4

M & L in repair 100 mm CI nahani traps including joint to waste pipe fixed in cement concrete B1 ( 1:2:4) complete all as specified and directed.

S & F in repair 100mm chromium plated grating round shape fixed over floor trap with coloured cement all as directed

S&F in repair 15 mm dia CP kitchen sink mixer for mixing hot and cold water with regular spout without pop up waste system. (Make Jaquar (CON-309KN) or Prayag Cat Part No - 9355.)

S & F sink with draining board, made of Stainless steel out 1 mm thick for kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 915mmx460mm with bowl size 410mm x330mm x160mm

M & L in repair 40mm bore Waste fittings , brass, CP for sinks etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed Complete all as specified and directed. (Rate = 76.6+6.9=83.50)

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15 mm thick bedding layer in cement mortar 1:6 as in cooking platform including dismantling of old stone broken/cracked stone slabs complete all as specified and directed. (Rate = 210.70+2870.40+83.50=3164.60)

S & F in repair stainless steel plate rack made of 0.80 mm thick sheet of size 1200x900x250mm complete all as specified and directed.

Supply & fix in repair ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed (Upto six story Buildings). Make Prayag/Polytuf ( Rate = 168.6+11.60=180.20)

Demolition of Rienforced cement concrete n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets, any thickness including cover fillets.

M & L for 18mm thick one side decorative lamination and other side balancing white sheet consisting of carcass 18mm thick PVC sheet fixed with approved adhesive and self tapping screws all as specified and directed.

S & F for 20mm wide & 1mm thick PVC EDGE BENDING pasted to Edges of PVC Furniture with suitable adhesive complete all as specified and directed.

S&F soft close Telescopic drawer channel for fixing of baskets Model no RHS -4503-20 Make Peacock Revera, Glen as specified and directed.

S&F in repair 75mm SS Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.

S & Fix in repair Continuous (piano) hinges (width 30 mm) mild steel, bright finish or electrogalvanised. complete all as specified and directed.

S&F in repairs 100mm size extruded brass handles fabricated type polished complete all as specified.

S&F Stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F perforated cutlary Model no - PR-21x20x6 Cut (P)(475x485x350)mm stainless steel of grade 304 complete all as specified and as directed. Make Peacock, Revera, Glen

S&F Three tier trolley bottle pull out Modelno -21x20x6 Bottle of size 485x530x150mm of stainless steel of grade 304 complete all as specified and directed. Make Peacock, Revera, Glen

S&F plate basket Model no -21x20x6 Plate (470x535x200)mm stainless steel of grade 304 complete all as specified and directed. Make Peacock, Revera, Glen

S&F in repair Three tier trolley bottle pull out of size 485x530x150mm of stainless steel of grade 304 complete all as specified and directed.

M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm complete all as specified and directed

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 15mm thick plaster screed bed layer in CM 1:3 on existing surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.40 Kg/Sqm of area complete all as specified. (c) Laying 3mm thick APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied over a coat of bitumin of Gde 85/25 1.2 kg per sqm complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or inserting APP Mambrane, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 15 mm th in cm (1:4) in two layers (10mm+5mm ) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , rendering 10mm thick in cement mortar 1:6,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

S&F in repair rotational moulded polythene water storage tanks, multi-layered, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed.

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls including taking down complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including taking down complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) junction single (Single T)equal or unequal with rubber ring joints fixed to walls complete all as specified and directed.

Removal of plants/trees of girth n exe 30 cm from roof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed. Notes (i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding. (ii) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K m all as directed by engineer -in charge. (iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same.

Taking down copper/aluminium point wiring (light, fan,buzzer, socket or power & AC Points) complete, including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. removing materials to store for keeping safe custody or for taking credit and making good disturbed surfaces of walls, floors etc as per existing all as Specified and directed.

M & L for point wiring concealed type , suitable for modular plates incl necessary cutting/chessing etc and making good the disturbed surface with single core,multistranded PVC insulated copper conductor cable 1100 volts grade fo FRLS size 1.5 sqmm in and including 20mm dia heavy duty rigid non metalic PVC conduit and conduit accessories with one single core PVC insulated unsheated 1.5sqmm multistranded copper conductor as earth coninuity wire and connected to earth dolly for fixing of modular flush box,modular blank plates, fixed with brass scres and cap washers for one light point controlled by one number one way switch complete all as specified and directed.(Note - Accessories like modular metal boxes, inner & outer plates will be paid and measured separately in respective items of schedule)

All as per item No. 02 here-in-before but for ceiling fan/exhaust fan point controlled by one push button on independent board complete all as specified and directed.

All as per item No.02 here-in-before but for Bell point controlled by one push button on independent board complete all as specified and directed.

All as per item No 02 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board complete all as specified and directed.

All as per item No. 02 here-in-before but for one five pins 5 Amps switch socket outlet point on same board complete all as specified and directed.

All as per item No. 02 here-in-before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

All as per item No. 02 here-in-before but for 15 amps socket outlet for AC/Geyser with 4 Sqmm Copper incl 4 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

S & F modular switch 1 way 6 amps, 1 module complete all as directed.

S & F modular switch 1 way 16 amps, 1 module complete all as directed.

S & F modular bell push 6 amps, 1 module complete all as directed.

S & F modular sockets 6 amps, 2/3 pin combined two module complete all as directed.

S & F modular sockets 6/16 amps, 2/3 pin combined two module complete all as directed.

S & F modular white cover plate with frame, 1 module complete all as directed.

S & F modular white cover plate with frame, 2 module complete all as directed.

S & F modular white cover plate with frame, 3 module complete all as directed.

S & F modular white cover plate with frame, 4 module complete all as directed.

S & F modular white cover plate with frame, 6 module complete all as directed.

S & F modular white cover plate with frame, 8 module complete all as directed.

S & F modular flush metal box 1/2/3 module complete all as directed.

S & F modular flush metal box 4 module complete all as directed.

S & F modular flush metal box 6 module complete all as directed.

S & F modular flush metal box 8 module complete all as directed.

S & F modular fan regulator, step type, 120 watts, W-2 module complete all as directed.

S & F Bell Ding Dong AC, 230 Volts, Single pole complete all as specified.

S&F for lamp holder, PVC/Polycarbonate type of Normal/angular shape with back plate complete all as directed.

M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, iwsolated body complete.

M&L For Sub main wiring with 6 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 4 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed.

M&L For Sub main wiring with 10 sqmm (Nominal area) with two runs of single core cable PVC insulated FR multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 6 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as Specified and directed.

S&F in replacement MCB, DP, 240 Volts, AC 63 Amps of breaking capacity 10 KA C curve.

S&F in replacement MCB, DP, 240 Volts, AC 40 Amps of breaking capacity 10 KA C curve.

S&F in replacement MCB SP 240 Volts AC 6 - 40 Amps of breaking capacity 10 KA C curve.

S & F in replacement Sheet metal enclosure DB ,Single pole and neutral with 200 Amps rated bus bar,230 volts, glazed, 8 way double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface all as specified and directed.

S & F LED Batten type fitting for surface and wall mounted type LED batten with Polycarbonate housing & integrated electronic driver completely pre wired 20W, 230V , with connector blok, etc., complete with all accessories and connecting up with suitable size, 1 sqmm three core copper conductor flexible wire , screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

S & F LED Batten type fitting for surface and wall mounted type LED batten with Polycarbonate housing & integrated electronic driver completely pre wired 9W, 230V , with connector blok, etc., complete with all accessories and connecting up with suitable size, 1 sqmm three core copper conductor flexible wire , screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

Supply and fixing Indoor decorative luminaire suitable for 12W LED surface type mounted LED luminaires flat type light weight die cast body with premium diffuser all accessories 3 core copper wire for connection and remove the UNSV fittings and all as specified and directed.

Supply and fixing Indoor Decorative wall light fixture made up of Polycarbonate with suitable for 10 W LED lamp incl lamp (spiral B-22 base) surface type mounted LED luminaires round type light weight plastic body with all accessories 3 core copper wire for connection and remove the UNSV fittings and all as specified and directed.

Supply and fixing Indoor decorative 4W LED type bed side light fittings with all accessories 3 core copper wire for connection and remove the UNSV fittings and all as specified and directed.

Taking down ceiling fan of 1200/1400 mm sweep, exhaust fan of any sweep, by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of bush, bearing, condenser,painting and re-winding all as directed. (Note : (i)The rate deemed to be included for Rubber Bush, Gun Metal Bush, bearing,capacitor, twin core twisted copper flexible wire,down rod,canopy etc.,. (ii) Painting and winding shall be measured and paid separately under relevant item).

Dismantling complete any type of fan with its canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan, taking out starter, rotor winding ball bearing, gun metal bush etc. and removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufactures design and as directed and re-assembling the complete of following:-

(a) Ceiling fan 1200mm/ 1400mm sweep

(b) Exhaust fan 300mm/230mm sweep

Painting of complete any type/size of fan with two coats of synthetic enameled paint of specified colour after preparation of surface by cleaning and removing any type of sticky dust with cleaning material as required and writing letters and numbers complete aall as directed of following fans:-

(a) Ceiling fan 1200mm/ 1400mm sweep (any type/ size)

(b) Exhaust fan 300mm/230mm -do-

S&F in replacement louvers with shutter metallic body suitable for single phase 240 Volts AC heavy duty exhaust fan 300 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. NOTE: Louver Shutter are to be replaced alongwith wall upto 24 metre above ground level including all necessary T&P and fixing accessories etc.

M&L for exhaust fan blade (metal body) suitable for 230/300 mm sweep for exhaust fan complete all as directed.

Taking down old and repairable geyser 25 Ltrs capacity of any type/make after removing inlet and outlet water connection all as specified.

S&F in replacement of heating element 2000 watt 220 volt, ISI mark, round / tringular base type all as reqd at site.

S&F in replacement of base plate assly 25 ltr capacity for horizental and vertical type of geyser made out of copper, cromium plate type all as specified and directed.

S&F in replacement of thermostate 220 volt, ISI mark.

S&F in replacement of glass wool for 25 ltr geyser @ 8 Kg.

S&F in replacement of top and bottom cover of MS sheet as per sample for 25 ltrs Cap Geyser with nuts bolts & screws etc all as directed.

S&F in replacement of outer cover of MS sheet duly painted with synthetic enamelled paint with spray gun of 25 ltrs geyser of horizental / vertical type.

S & F in replacement of PVC connection with rope threaded outer layer suitable for hot water 60 cm long for 15mm dia pipe.

S & F in replacement of PVC connection with rope threaded outer layer suitable for cold water 60 cm long for 15mm dia pipe.

S & F in replacement of safety valve (Pressure release valve) for geysers of any capacity and type suitable for 25 ltrs capacity.

S&F in replacement geyser inner water tank 25 ltrs capacity steel body as per sample duly tested complete after removing inlet and outlet water connection from existing tank complete all as directed.

M&L for Painting of complete single phase 240 Volts Water Heater (Geyser) of 25 Ltrs capcity with two coats of synthetic enameled paint of specified colour after preparation of surface by cleaning and removing any type of sticky dust with cleaning material as required and writing letters and numbers complete all as directed.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 78824.00

sony engineering works

friends associeates