GE(U)/CHM-34/2023-24 ROUTINE MAINTENANCE OF WATER PIPES, VALVES, NRVS, ARVS, VALVE PITS, NOZZLES AND CONNECTED FITTINGS IN MES COLONY, JCOS ACCN, SINGLE ACCN AND SERVANT QTRS UNDER GE(U) CHANDIMANDIR

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits, pipes and cables etc. not exc 10 Sqm on plan and getting out in any type of soil all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers of any type of soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engineer - in - Charge.

Taking up CI/ DI/ MS pipe (including all fittings) with spigot and socket ends centrifugally cast 80 mm bore laid in trenches complete all as specified and directed by Engineer - in - Charge.

Taking up CI/ DI/ MS pipe (including all fittings) with spigot and socket ends centrifugally cast 100 mm bore laid in trenches complete all as specified and directed by Engineer - in - Charge.

Taking up CI/ DI/ MS pipe (including all fittings) with spigot and socket ends centrifugally cast 150 mm bore laid in trenches complete all as specified and directed by Engineer - in - Charge.

Taking up CI/ DI/ MS pipe (including all fittings) with spigot and socket ends centrifugally cast 200 mm bore laid in trenches complete all as specified and directed by Engineer - in - Charge.

Taking up CI/ DI/ MS pipe (including all fittings) with spigot and socket ends centrifugally cast 250 mm bore laid in trenches complete all as specified and directed by Engineer - in - Charge.

Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 100 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed.

Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 150 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed.

Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 200 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed.

Supplying, laying, jointing, commissioning and testing of ductile iron pressure pipe with socket & spigot ends having ISI marking confirming to IS:8329/2000 in standard lengths of classification K-9 suitable for and including push on rubber tyton (gasket D-jointing) with cement mortar lining in the pipes having 250 mm bore, including aligning the pipes inside trench as per IS:12288/1987 and testing the joints with required water pressure complete all as specified & directed. Notes: (For Ser Item No 09 to 12) (i) Excavation earth works shall be measured and paid for separately. (ii) CI/DI Joint specials (fittings) shall be measured and paid for separately. However, rubber tyton joint (gasket D-Joint) for pipes is included in the rates quoted by the tenderer.

Cutting to existing CI/DI pipe line of size 80mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : Excavation and earth work if any shall be measured and paid for separately.

Cutting to existing CI/DI pipe line of size 100mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : Excavation and earth work if any shall be measured and paid for separately.

Cutting to existing CI/DI pipe line of size 150mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : Excavation and earth work if any shall be measured and paid for separately.

Cutting to existing CI/DI pipe line of size 200mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : Excavation and earth work if any shall be measured and paid for separately.

Cutting to existing CI/DI pipe line of size 250mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : Excavation and earth work if any shall be measured and paid for separately.

S & F ductile iron pipe fittings such as bends, tapers, tee pieces single branch, "Y" junction, collars, caps and plugs etc spigot socketed or flanged ends type of size up to 150mm nominal bore conforming to IS-9520/2000 with pressure rating PN-1 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS:9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS-9523/2000) complete all as specified and directed by Engineer - in - Charge.

S & F ductile iron pipe fittings such as bends, tapers, tee pieces single branch, "Y" junction, collars, caps and plugs etc spigot socketed or flanged ends type of size up to 200 to 300mm nominal bore conforming to IS-9520/2000 with pressure rating PN-1 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS:9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS-9523/2000) complete all as specified and directed by Engineer - in - Charge. Note: (For Ser Item No 18 to 19) (i) Joint and jointing material shall be measured and paid separately. (ii) Excavation and earth work shall be measured and paid for separately.

M&L for run lead joint for spigot and socketed end CI pipe & fittings 80 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for run lead joint for spigot and socketed end CI pipe & fittings 100 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for run lead joint for spigot and socketed end CI pipe & fittings 150 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for run lead joint for spigot and socketed end CI pipe & fittings 200 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for run lead joint for spigot and socketed end CI pipe & fittings 250 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for run lead joint for spigot and socketed end CI pipe & fittings 300 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for cocking of run lead joint for spigot and socketed pipes & fittings 80 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for cocking of run lead joint for spigot and socketed pipes & fittings 100 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for cocking of run lead joint for spigot and socketed pipes & fittings 150 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for cocking of run lead joint for spigot and socketed pipes & fittings 200 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for cocking of run lead joint for spigot and socketed pipes & fittings 250 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

M&L for cocking of run lead joint for spigot and socketed pipes & fittings 300 mm bore complete all as specified including earth work as required complete all as specified and directed by Engineer - in - Charge.

Taking out 80 mm bore sluice valve top cover, spindle and broken / unsv check nut (gutka) carry to wkshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle and washer of existing size complete all as specified and directed.

Taking out 100 mm bore sluice valve top cover, spindle and broken / unsv check nut (gutka) carry to wkshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle and washer of existing size complete all as specified and directed.

Taking out 150 mm bore sluice valve top cover, spindle and broken / unsv check nut (gutka) carry to wkshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle and washer of existing size complete all as specified and directed.

Taking out 200 mm bore sluice valve top cover, spindle and broken / unsv check nut (gutka) carry to wkshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle and washer of existing size complete all as specified and directed.

Taking out 250 mm bore sluice valve top cover, spindle and broken / unsv check nut (gutka) carry to wkshop & refixing of sluice valve after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nut, bolt,Spindle and washer of existing size complete all as specified and directed.

Taking out old unserviceable Sluice valve & Supplying and fixing cast iron sluice valve flanged type rating PN 1.6 size 80mm bore conforming to IS-14846 with gun metal spindle and hand wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing cast iron sluice valve flanged type rating PN 1.6 size 100mm bore conforming to IS-14846 with gun metal spindle and hand wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing cast iron sluice valve flanged type rating PN 1.6 size 150mm bore conforming to IS-14846 with gun metal spindle and hand wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing cast iron sluice valve flanged type rating PN 1.6 size 200mm bore conforming to IS-14846 with gun metal spindle and hand wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing cast iron sluice valve flanged type rating PN 1.6 size 250mm bore conforming to IS-14846 with gun metal spindle and hand wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing ductile iron sluice valve flanged type rating PN 1.6 size 80mm bore conforming to IS-14846 with wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing ductile iron sluice valve flanged type rating PN 1.6 size 100mm bore conforming to IS-14846 with wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing ductile iron sluice valve flanged type rating PN 1.6 size 150mm bore conforming to IS-14846 with wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing ductile iron sluice valve flanged type rating PN 1.6 size 200mm bore conforming to IS-14846 with wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Taking out old unserviceable Sluice valve & Supplying and fixing ductile iron sluice valve flanged type rating PN 1.6 size 250mm bore conforming to IS-14846 with wheel, necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Dismantling of brick work built in cement mortar all as specified and directed by Engineer – in - Charge.

M&L Brick work with sub class 'B' old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 all as specified and directed by Engineer - in - Charge.

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .

M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer - in - Charge .

Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge.

M & L rendering 15mm thick on other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge

M & L as in repairs for framed work for valve pit chamber cover made of MS equal angle and MS sheet 3 mm thick including welding, cutting, hinges, locking arrangments including painting complete all as specified and directed.

Taking down steel tubing 100mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 80mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 50mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 40mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 25mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 100mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 80mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 50mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 40mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 25mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 20mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) 15mm bore including all type of new fittings i.e. sockets, Tee union, elbow, etc all as specified and directed by Engineer - in - Charge.

S&F 100mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S&F 80mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S&F 50mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S&F 40mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S&F 25mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S&F 20mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S&F 15mm bore medium grade steel tubes galvanized with all fittings laid in trenches/ wall/ ceiling/ floor all as specified and directed by Engineer - in - Charge .

S & F 110 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

S & F 90 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

S & F 63 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

S & F 50 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

S & F 32 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

S & F 25 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

S & F 20 mm diameter 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ walls/ ceiling/ floors all as specified and directed by Engineer - in - Charge.

M & L Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm / 20 mm/ 25 mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S&F as in repairs gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 50mm bore as in repairs complete all as specified and directed by Engineer – in – Charge.

S&F as in repairs gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 40mm bore as in repairs complete all as specified and directed by Engineer – in – Charge.

S&F as in repairs gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 25mm bore as in repairs complete all as specified and directed by Engineer – in – Charge.

S&F as in repairs gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 20mm bore as in repairs complete all as specified and directed by Engineer – in – Charge.

S&F as in repairs gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore as in repairs complete all as specified and directed by Engineer – in – Charge.

Rubber gasket joint suitable for 80mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Rubber gasket joint suitable for 100mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Rubber gasket joint suitable for 150mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Rubber gasket joint suitable for 200mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Rubber gasket joint suitable for 250mm bore spigot and socketed pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

Rubber or fibre board gasket joint suitable for 80mm bore flanged pipes and fittings including provision of bolts, nuts, washers and white lead or mineral oil complete all as specified.

Rubber or fibre board gasket joint suitable for 100mm bore flanged pipes and fittings including provision of bolts, nuts, washers and white lead or mineral oil complete all as specified.

Rubber or fibre board gasket joint suitable for 150mm bore flanged pipes and fittings including provision of bolts, nuts, washers and white lead or mineral oil complete all as specified.

Rubber or fibre board gasket joint suitable for 200mm bore flanged pipes and fittings including provision of bolts, nuts, washers and white lead or mineral oil complete all as specified.

Rubber or fibre board gasket joint suitable for 250mm bore flanged pipes and fittings including provision of bolts, nuts, washers and white lead or mineral oil complete all as specified.

Supply and laying as in repairs CI pipe with flanged ends / vertically cast centrifugally cast, class A , in any length, for 150 mm bore laid in trenches complete all as specified.

Supply and laying as in repairs CI pipe with flanged ends / vertically cast centrifugally cast, class A , in any length, for 200 mm bore laid in trenches complete all as specified.

M&L as in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 142 gm screwed for 15mm bore iron pipe supplied and fixed in repairs complete all as specified and as directed by Engineer-in-charge.

M&L as in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.

M & L for area cleaning of water supply including clearing of vegitation, wild growth and trimming of grass etc in and around the water storage tanks, valve pits and installation compound and removing rubbish off the premises complete including spreading of suitable chemicals as approved for further growth of weeds and vegitation in the vicinity of installations complete all as specified and as directed.

M&L for Bacteriological/Chemical testing and analysis with preparation of detailed report as per IS 10500:1991 after collection of samples at various locations all as specified and directed by Engr-In-Charge. Note: (a) the testing will be conducted by Govt Approved Labs/NABL labs only (b) the contractor will make suitable arrangements for collection of sample water with prior intimation to Engr-in-Charge . (c) Test report should be submitted to the office by the Contractor.

S & F PP-R Gate valves (brass insert) as per requirement of the site 63mm diameter all as specified and directed by Engineer - in – Charge .

S & F PP-R Gate valves (brass insert) as per requirement of the site 50mm diameter all as specified and directed by Engineer - in – Charge .

S & F PP-R Gate valves (brass insert) as per requirement of the site 32mm diameter all as specified and directed by Engineer - in – Charge .

S & F PP-R Gate valves (brass insert) as per requirement of the site 25mm diameter all as specified and directed by Engineer - in – Charge .

S & F PP-R Gate valves (brass insert) as per requirement of the site 20mm diameter all as specified and directed by Engineer - in – Charge .

S&F as in repairs DOL starter for induction motor capacity of 1 HP to 5 HP Three phase ,415 V, 50 Hz as per specified and directed by Engr-in-charge.

S&F as in repairs Star-Delta Starter motor starter 15HP three phase ,415V provided with protection degree IP 54 extended wide band coil FRLS (Fire retardant low smoke )internal wiring Air break ,15HP ,11.5KW contactor Size 15 overload relay range (A) 13A-21A as per specified and directed by Engr-in-charge.

S&F as in repairs Star-Delta Starter motor starter 10HP three phase ,200V to 400V with protection degree IP 54 extended wide band coil FRLS (Fire retardant low smoke )internal wiring Air break HSN ,10HP 7.5KW contactor Size 10 overload relay range (A) 9A -14Amp as per specified and directed by Engr-in-charge.

S&F as in repairs horizontal ,multistage ,end -section centrifugal pump with axial suction port radial discharge port 0.5/0.7KW/HP single phase 220-240 Volts,min head 34 mtr, min floe 3.1m3/h ,RPM 2900, Rated cuttent -3.1-2.8A, Enclosour class (ICE34-5)IP55 ,Pump materials in contact with the liquid are in high grade SS withminiumum efficiency index70% with pressure controller for costant water pressure,incl pressure meter ,pressure tank 24L for constant water ,material SS 304 with incl complete GI fitting for fixing of pump with exiting pipe Inlet & outlet 25 mm bore incl PCC Work complete all as directed.

S&F in repair Aventura global water pressure tank (24 L) working pressure-10,Item part No-027061, Product dimensions 30x30x47cm, 4.5Kilograms, ASIN-B01MZ8D179 Make:-Aventura & equivalent make As per approved by GE.

S&F as in repairs Italtecnica PM/5G Pressure relay to 05 bar 1.25 BP ,a cap n Code -PM/5G for pressure pump at MD Accn areas.as per specified and directed by Engr-in-charge.

Supplying ,installation, testing, commissioning in repair of whole house water filtration system made from food grade material, suitable for removal of impurties such as silt, sand and other sediments from water. Water house filtration system shall be comprising of following sepcification and accessories. (a) Capable of filtration of impurities up to 5 micron from water . (b) High performance depth filtration, no electricity required. (c) FDA CFR-21 compliant . (d) In-built shut off valve .

(e) Working pressure 1.7 - 6.9 Bar . (f) Flow rate upto 170 LPM . (g) Cartridge inclusion type. (h) Operating temperature (04º C to 37.8º C) (j) Filter wrench to be provided for sump removal and cartridge changing . (k) One inch NPT inlet or outlet ports. Note:- (i) Quoted rate shall be inclusive of cutting of pipe for making connection with and including any type of GI/CPVC/UPVC fitting required for installation of the filter complete all as specified and directed. Make : Aquaguard, Kent, Ionix, Clear Aqua

S&F as in replacement, mild steel clamp suitable for 100mm bore pipe made from 25x3mm flat iron including 20mm socket welded in the clamp including nuts and bolts and rubber sheet complete all as specified and as directed.

S&F as in replacement, mild steel clamp suitable for 150mm bore pipe made from 25x3mm flat iron including 20mm socket welded in the clamp including nuts and bolts and rubber sheet complete all as specified and as directed.

S&F as in replacement single phase electrically actuated ductile iron butterfly valve suitable with nominal dia 150mm PN-16, suitable for potable water application, 230 V AC/24 V DC, alongwith starter/control panel, positioner transmitter complete all as specified and directed.

S & F in repairs bib taps 20mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer - in - Charge .

S&F as in repairs 25mm dia Brass NRV complete all as specified and as directed.

S&F as in repairs 20mm dia Brass NRV complete all as specified and as directed.

S&F as in repairs 15mm dia Brass NRV complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate for foundations, mass and for repairing to paths/ road & hardstanding etc. including necessary cutting of roads/ paths for passing of pipes and making good the disturbed portion complete all as specified and directed by Engineer – in - Charge. Note : For payment purpose, quantity of concrete provided / laid shall be measured & paid for.

S&F as in repairs DI air release valve double orifice isolating type with SS Ball as per IS :14845,PN-1.0 flanged ends of size 150 mm dia complete all as specified and directed .

S&F as in repairs DI air release valve double orifice isolating type with SS Ball as per IS :14845,PN-1.0 flanged ends of size 100 mm dia complete all as specified and directed .

S&F as in repairs Ductile iron non return valve with flanged ends of size 100 mm dia complete incl all jointing materials such as nuts, bolts, washers, rubber gaskets etc all as specified and directed.

S&F as in repairs Ductile iron non return valve with flanged ends of size 150 mm dia complete incl all jointing materials such as nuts, bolts, washers, rubber gaskets etc all as specified and directed.

S&F as in repairs Ductile iron non return valve with flanged ends of size 200 mm dia complete incl all jointing materials such as nuts, bolts, washers, rubber gaskets etc all as specified and directed.

S&F as in repairs cast iron butterfly Valve 150 mm dia conforming to BS:5155, MSS SP 67 & APT 609 and designed to fit including gaskets between mating flanges. The valves shall be suitable for flow in either direction and seal in both directions including nut bolt and washer, welding, cutting and any other work for fixing of pipe line complete all as specified and directed.

S&F as in replacement, waterproof light fitting, IP-68, Green colour, aluminium body, LED 10 W complete all as specified and as directed.

S&F as in replacement, waterproof light fitting, IP-68, RGB colour, aluminium body, LED 10 W complete all as specified and as directed.

S&F as in replacement, waterproof light fitting, IP-68, RGB colour, Stainless Steel body, LED 10 W complete all as specified and as directed.

S&F in replacement, waterproof light fitting, IP-68, Red colour, Stainless Steel body, LED 10 W complete all as specified and as directed.

M&L as in replacement, stainless steel pipe, 54 mm dia, grade 304 and circular in shape and having provision of fixing nozzles 15 mm with threads as directed for fountain including welding work and including connecting work requirement complete all as specified and directed.

S&F as in replacement, of brass nozzle adjustable type of 15 mm dia, interior thread complete all as directed.

JAMDAGNI ENGG WORKS

Bharat Enterprises