REPAIR OF BAGEN RIVER BRIDGE LOCATED AT KM 2 OF RAM NAGAR NISK LINK ROAD IN BANDA DISTRICT WORK

Lifting of span, cleaning, oiling, greasing and re-setting of Rocker/ Roller Bearings/Elastomeric Bearing including cleaning of the surface thoroughly from grease,dust and foreign matter,the cost includes all materials, labour, machinery, T&P and making all arrangements like scaffolding kirbs etc. as per MORT&H specification 2808 & conforming to IRC:183(part-II) Section-IX.

Elastomeric bearing Supplying, fitting and fixing in position Elastomeric bearing as specified in Drawing includes all materials, labour, T&P inclusive cost of Reinforced Elastomeric bearings as per drg. and design approved by competent authority complete as per specification and instructions of Engineer in Charge including MORT&H specification. but Excluding cost of Labour and Removal of old damaged Elastomeric bearing

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy

Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.

Providing and fixing of averry dennision/3 M Brand RPM series 290(CAT Eye)with shank as per ASTM (RED/ YELLOW COLOUR) Made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflective in wet and Dry condition with bitumen adhesive BT 69. (MORTH 804,8.35) but without sunk

Supply and fixing of retroreflective high intensity informatory sign board/ cautionary sign board etc. As per MoRTH specification. Informatory Sign Board

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflect rising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes(Morth 803,8.13)

Removal of Vegitation / Plants, Removal of entier root inside the bridge portion. Remains of the root shall be treaded with special chemical treatment.(as per thespecification and Dorected by Engineer /incharg with prior approval of concerned Supritending Engineer.)

Replacement of old Drainage Spouts with new including dismentling and widening the existing opening and fixing new drainage Spout with M.S. Grating System