PERIODICAL SERVICES TO MD AND OTM ACCN OF HOSPITAL AREA AT 7 AFH KANPUR CANTT

Amount

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with coir wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed.. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for applying one coat of white wall care putty (1 mm thick) and applying one coat of alkali resistant primer over prepared surface by complete removal of old finish/newly plastered surface by using Airless spray techonology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and complete all as specified and directed. Note : -1) Sanding of old decorated surface to be done by mechanical sander as per paint manufacturer's instructions. 2) cost of complete removal will be paid in item no.1. 3)- Rate included for necessary scaffolding and arrangments for working upto 20m height)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint on (already prepared surfaces) wall having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (approved by GE) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm by using Airless spray technology applied by Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer complete all as specified and as directed. ( Mechanical means) (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for applying one coat of exterior weather proof (already prepared surface) 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as specified and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of old treated external wall surfaces complete all as specified in SSR Part I and applying one coat of cement base paint with roller complete all as specified and directed.

M & L for preparation old treated external wall surfaces complete all as specified in SSR Part I and applying two coats of cement base paint with roller complete all as specified and directed.

M & L for applying Two coats of Plastic emulsion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described applied by Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer ( Mechanical means) complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of surfaces and applying one coat of oil bound distemper on old treated surface of ceiling etc applied by Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer ( Mechanical means) complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of surfaces and applying one coat of oil bound distemper on old treated surface of wall etc applied by Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer ( Mechanical means) complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of surfaces and applying two coat of oil bound distemper on old treated surface of wall applied by Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer ( Mechanical means) complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for prepration of old surface of wall and applying one coat of white wash with roller complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of old treated surface of ceiling and applying one coat of white wash with roller complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc and rendering 15 mm thick in two layers of 10+5mm in CM 1:4 mixed with PD Proof 101 LW (+) of Dr fixit or equivalant integral water proofing admixture @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalant in the ratio (1:4:7) ,( one part super latex, 4 part water and 7 parts of cement) @ 1.50kg of homogenious mixture/sqm in two coats and finish the surface even and smooth without using extra cement) for external walls complete all as specified and directed. Note :-PD proof and super latex to be measured and paid separately. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M & L for taking down cement plaster on brick or concrete surfaces including raking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in CM 1:6 mixed with PD Proof 101 LW (+) of Dr fixit or equivalent integral water proofing admixture OF make specified @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalant in the ratio (1:4:7) ,( one part super latex, 4 part water and 7 parts of cement) @ 1.50kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) for internal walls complete all as specified and directed. Note :- PD proof and super latex to be measured and paid separately. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

Supply only Pidi proof 101 LW(+) of Dr Fixit or equivalent integral water proofing admixture OF make specified as approved by GE

Supply only super latex 302 of Dr Fixit or equivalent integral water proofing admixture OF make specified as approved by GE

Removal of plants/trees of girth n exe 30 cm from roof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVC pipe joints which were damaged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed. Notes (i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding. (ii) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 Km all as directed by Engineer -in charge. (iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted rate shall be deemed to include the same (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height).

M&L Writing Letters or Figures (Block, Roman, Italic or Indian), etc. Height not exc. 150mm, complete all as specified and as directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L Writing Stops, Commas, Short Lines, Dashes, Hyphens, Brackets, etc., complete all as specified and as directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

Dismantling of Plain or corrugated AC/steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed..

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

M & L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed

M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) With semi perforated false ceiling tiles of Size 595 x 595 mm of approved texture, with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles having moisture less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications as per directions of the Engineer-in-Charge.

M&L Glazed ceramic tiles coloured size of size 450 x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 10 mm thick rendering in CM 1:4 in backing and including dismantling of tiles complete all as specified and directed

M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match over and including screed bed or bedding layers of mortar 15 mm thick in CM 1:6 and including dismantling of tiles complete all as specified and directed

M & L for industrial , heavey duty vitrified tiles, scratch, strain & chemical resistant, 600mmx600 mmx15-16 mm thick, MOH not less than 6, water absorption less than 0.5%, laid and jointed with adhesive, with 3mm spacer as in floors, all as per manufacturer instruction over and including screed bed or bedding layers of mortar 15 mm thick in CM 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and including dismantling of tiles complete all as specified and directed.

M&L for one coat of luxury Emulsion with silver Ion Technology recommended by Indian health Association, Which kill 99% of infection causing bacteria on painted surface and improves indoor air quality by reducing formaldehyde, a harm pollutants. on old/new surfaces including preparation of surfaces (Note : Painting will be done through authorised applicators only & applied by Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer ( Mechanical means) complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L for removing/cleaning of existing painted surfaces of ACP board in wall, column, beam etc with help of hand held/long hand sander and preparing the surface smooth and applying one coat,100% Acrylic paint on ACP board with using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS ( Mechanical means) including necessary scaffoldingetc complete all as specified and directed. (Note:- Rate included for necessary scaffolding and arrangments for working upto 20m height)

M&L two coat of damp proof paint any tint on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as specified and directed. Make : Berger/Asian

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

All as per item No 40 but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters of any description exc 1 sqm but n.exec 2 sqm each all as directed.

Providing and fixing factory made uPVC white colour sliding windows, area n exc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (+ 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical lenght in each shutters) (45.5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2 mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpuse).

M&L for repairing of damaged portion of tarrace/roof surface of rain water pipe by cleaning and repairing to the surfaces of tarrace/roof by using CM (1:3) with mix with 3% WPC & sealed with 85/25 hot blown grade bitumen complete to make roof surface fully leak proof complete all as specified and directed.

M & L Post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

S&F plain glass 5mm thick exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed. Make : ECHON/Rajshree/Sintex

S&F Butt Hinges medium weight stainless steel 100mm long complete all as specified.and directed.

S&F stainless steel sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F stainless steel handles 150 mm size for kitchen cabinet shutters Make :Hexa, Shreeji, Hafele

S&F stainless steel barrel tower bolt of 200 mm long size complete all as specified and directed.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description exc 1 sqm & n. exe 2 sqm each and refixing in same opening, all as specified and as directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed..

S&F in repairs 4.8 mm thick plain glass pin head type and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair runners 45 mm Telescopic (KTS-20) for SS wire basket full extension load capacity 50 kgs, Make :Hexa, Shreeji, Hafele

S&F in repair door bottom seal with alluminium strip and rubber of size 900mmx40mm fixed with Stainless screw etc. complete all as specified and directed.

S&F powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug Middle;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Aluminium sliding door bolt 250 mm long Aluminium door stopper aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly

S&F in repair stainless steel pegs set of 6 pegs fixed in wall with Stainless screw etc. complete all as specified and directed.

M&L for two coat of luxury Emulsion with silver Ion Technology recommended by Indian health Association, Which kill 99% of infection causing bacteria on painted surface and inproves indoor air quality by reducing formaldehyde, a harm pollutants. including preparation of surfaces (Note : Painting will be done through authorised applicators only & applied by Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer ( Mechanical means) complete all as specified and directed. (Note:-Rate included for necessary scaffolding and arrangments for working upto 20m height) MAKE

M&L for texure paint with base (as per manufacturer instruction) of approved tint & approved pattern on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as spfd & directed by Engr-in-charge. (Note:-Rate included for necessary scaffolding and arrangments for working upto 20m height) Make : Berger/Asian/Nerolac

Note:- (1)- Rate quoted above are including the cost for all taking down/refixing of internal electrific fitting/fixture as per site requirement. (2) All painting/distempering/ preparation/removal/white wash etc works will be done after proper covering of doors/windows/ventilators/ glasses/all type bath fittings & electric fittings etc. Cost for cleaning of splashes is also included in quoted rate by contractor . (3) Measurement and payment of individual item will be done only after complete removal of connected debris from the site.

m/s sahu enterprises

M/S MAA TARA TREATMENT PROJECT

JEEWAN BUILDERS AND ENGINEERS

M/S SDS Construction Co.

M/s DKS Engineering Works

Khalil Ahmed and Sons