Repair to steel chairs, tables and certain steel furniture at Abohar and Fazilka Mil Stn

Amount

CHARPOY GI/IP

Removing old unservicable existing elbows and S & F new GI elbows 32mm dia ISI Mark all as specified & directed by Engineer-in-Charge. (Drg No. FD-220)

Removing old unserviceable broken checknuts and S & F new GI check nuts for 32mm GI pipes ISI Marked all as specified & directed by Engineer-in-Charge. (Drg No. FD-220)

Removing existing unseviceable long rails from Charpoy GI pipe and S & F new long rails made out of GI pipe 32mm bore medium grade as per existing shape & size complete as specified & directed by Engineer-in-Charge. (Drg No. FD-220)

Removing exsting damaged short rails and fixing short rails to charpoy after conversion from retrieved old long rails duly threaded at both ends and fixing the same as per exsting shape & size complete all as directed by Engineer-in-Charge. (Drg No. FD-220)

Removing exsting damaged legs and fixing legs after conversion from retrieved old short rails duly threaded at one end and another side welding with 3mm thick MS sheet base plate and mild steel brackets of required size & shape for fixing MNF set all as shown on drawing and as directed by Engineer-in-Charge. (Drg No. FD-220)

M & L for welding to broken / cracked joints of charpoy GI pipe 32 mm dia (i.e) short rail, long rail, legs etc) by gas welding as per existing design complete all as specified and directed by Engineer-in-Charge. (Drg No. FD-220)

Removing exsting unserviceable plywood from charpoy GI pipe and tightening entire frame and supply and fix 12mm thick plywood of BWR grade commercial of size 1980 x 900mm (Make : Archid /century /Greenply) fixed with flat head nut-bolts 5mm dia 60mm long, with washer (Total 06 Nos per charpoy) including drilling holes in ply and steel frame of charpoy. Complete all as specified and directed by GE/Engr-in-Charge. (Drg No. FD-220)

CHAIR VARANDAH

M & L for repair / fixing of broken parts of chair varandah by welding (Gas Welding) as existing with 20mm dia MS Conduite pipe where ever required as directed by Engineer-in-Charge. (Drg No. FD-19(M), FD-256/359).

M & L for preparation of surfaces and painting of chair varandah with two coat of synthetic enamel paint white all as specified and directed by Engineer-in-Charge. (Drg No. FD-19(M), FD-256/359).

Removing old exsting cane and recanning of chair varandah with new 4mm width 0.60mm thick cream colour plastic cane of approved quality all as specified in drg and as directed by Engineer-in-Charge. (Drg No. FD-19(M), FD-256/359).

Removing old unserviceable PVC seat and back from chair varandah and S&F new PVC seat and back 4mm thick weight not less than 1.85 Kgs for both seat and back having 4 x 10mm thick ribs moulded complete all as specified and directed by Engineer-in-Charge Make: Amko/Cello/Harmony (Drg No. FD/MAP-II/06)

Supply and Fix new hard rubber shoes superior quality (as approved) of required size to chair varandah all as specified and directed by Engineer-in-Charge. (Drg No. FD-19(M), FD-256/359/FD/MAP-II/06).

REPAIRS TO CHAIR CB STEEL WITH ARMS AND WITHOUT ARMS

Removing old unserviceable back frame of chair CB steel with arms and supply and fix new back frame made out of seasoned teakwood duly canned as per trade pattern. The chair shall be fixed with FI 3mm thick 14 X 25mm clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support as directed by Engineer-in-Charge. (Drg No. FD-75(M)).

Removing old unserviceable seat frame of chair CB steel with arms and supply and fix new seat frame made out of seasoned teakwood duly canned as per trade pattern. The chair shall be fixed with FI 3mm thick 14 X 25mm clips 02 Nos each on either side of seat duly welded and also making holes to seat frame centre to centre by drilling machine for fixing seat frame with required size screws for extra support as directed by Engineer-in-Charge. (Drg No. FD-75(M)).

Removing old unserviceable hand rest and supply and fix new hand rest made out of well seasoned teakwood with required size screws. The hand rest shall be french polished with black colour all as specified, directed and as shown on drawing by Engineer-in-Charge. (Drg No. FD-75(M)).

Removing old unserviceable back frame of chair CB steel with out arms and supply and fix new back frame made out of seasoned teakwood duly canned as per trade pattern. The chair shall be fixed with FI 3mm thick 14 X 25mm clips 02 Nos each on either side of back duly welded and also making holes to back frame centre to centre by drilling machine for fixing back frame with required size screws for extra support as directed by Engineer-in-Charge. (Drg No. FD-75(M)).

Removing old unserviceable seat frame of chair CB steel with out arms and supply and fix new seat frame made out of seasoned teakwood duly canned as per trade pattern. The chair shall be fixed with FI 3mm thick 14 X 25mm clips 02 Nos each on either side of seat duly welded and also making holes to seat frame centre to centre by drilling machine for fixing seat frame with required size screws for extra support as directed by Engineer-in-Charge. (Drg No. FD-75(M)).

Removing old unserviceable PVC caps of top frame of chairs CB steel with and without arms and supply and fix new PVC caps (as approved) all as specified and directed by Engineer-in-Charge. (Drg No. FD-75(M)).

M & L for preparation of surfaces and painting of chair CB Steel With Arms with two coat of synthetic enamel paint Olive Green. All as specified and directed by Engineer-in-Charge. (Drg No. FD-75(M)).

M & L for preparation of surfaces and painting of chair CB Steel With out Arms with two coat of synthetic enamel paint Olive Green. All as specified and directed by Engineer-in-Charge. (Drg No. FD-75(M)).

ALMIRAH LARGE STEEL WITH SHELVES

Removing unserviceable legs of almirah and S&F new legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and as directed by Engineer-in-Charge. (Drg No. FD-67(M)/1031).

Removing unserviceable shelves from almirah Large steel. S& F of new shelves made of 1.00mm thick MS sheet of same shape & size as existing and as directed by Engineer-in-Charge. (Drg No. FD-67(M)/1031).

Removing unserviceable 3 way locking device. S&F complete new locking device of same shape & size as existing and as per drg and as directed by Engineer-in-Charge. (Drg No. FD-67(M)/1031).

Removing unserviceable handle from almirah large steel. S&F new CP handle 150mm long as approved and directed and as directed by Engineer-in-Charge. (Drg No. FD-67(M)/1031).

Removing old unserviceable locks. S&F new brass lock 6 levers to almirah as approved and as directed by Engineer-in-Charge. (Drg No. FD-67(M)/1031).

M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1031).

ALMIRAH MEDIUM STEEL WITH SHELVES

Removing unserviceable legs of almirah and S&F new legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1032).

Removing unserviceable shelves from almirah medium steel. S& F of new shelves made of 1.00mm thick MS sheet of same shape & size as existing and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1032).

Removing unserviceable 3 way locking device. S&F complete new locking device of same shape & size as existing and as per drg and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1032).

Removing unserviceable handle from almirah med steel. S&F new CP handle 150mm long of approved make and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1032).

Removing old unserviceable locks. S&F new brass lock 6 levers to almirah as approved and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1032).

M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and as directed by Engr-in-Charge. (Drg No. FD-67(M)/1032).

TABLE OFFICE OFFICER

Removing unserviceable top of table and S&F new top to table office officer steel made out of 18mm thick preleminated particle board with 6mm thick teak wood beading edging alround the top all as specified and as directed by Engr-in-Charge. (Drg No. FD-84(M)/1003).

Removing old unserviceable drawers from table office Officer steel and S&F new drawers made of 1.00mm thick sheet of same shape & size as existing all as specified and as directed by Engr-in-Charge. (Drg No. FD-84(M)/1003).

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge. (Drg No. FD-84(M)/1003).

Removing unserviceable locks from table office Officer steel and S&F of new brass locks of 6 lever with duplicate key of approved quality as approved by GE/Engr-in-Charge. (Drg No. FD-84(M)/1003).

Material & labour for painting to the frame of table with one coat of synthetic enamel paint olive Green all as specified and directed by Engineer-in-charge. (Drg No. FD-84(M)/1003).

TABLE OFFICE CLERK STEEL

Removing unserviceable top of table and S&F new top to table office clerk steel made out of 18mm thick prelaminated particle board with 6mm thick teak wood beading edging alround the top all as specified and directed by Engineer-in-charge. (Drg No. FD-84(M)/1004).

Removing old unserviceable drawers from table office clerk steel and S&F new drawers made of 1.00mm thick sheet of same shape & size as existing all as specified and directed by Engineer-in-charge. (Drg No. FD-84(M)/1004).

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge. (Drg No. FD-84(M)/1004).

Removing unserviceable locks from table office clerk steel and S&F of new brass locks of 6 lever with duplicate key of approved quality as approved by GE/Engr-in-Charge. (Drg No. FD-84(M)/1004).

Material & labour for painting to the frame of table with one coat of synthetic enamel paint olive Green all as specified and directed by Engineer-in-charge. (Drg No. FD-84(M)/1004).

TABLE 3' X 2' WITH DRAWER STEEL

Removing unserviceable top of table and S&F new top to table steel made out of 18mm thick prelaminated particle board with 6mm thick teak wood beading edging alround the top all as specified and directed by Engineer-in-charge. (Drg No. FD-1008).

Removing of old unserviceable drawers from table 3' x 2' steel and S&F of new drawers made of 1.00mm thick sheet of same shape & size as existing all as specified and directed by Engineer-in-charge. (Drg No. FD-1008).

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge. (Drg No. FD-1008).

Material & labour for painting to the frame of table with one coat of synthetic enamel paint olive Green all as per specified and directed by Engineer-in-charge. (Drg No. FD-1008).

TABLE 3' X 2' WITHOUT DRAWER STEEL

Removing unserviceable top of table and S&F new top to table steel made out of 18mm thick prelaminated particle board with 6mm thick teak wood beading edging alround the top all as per specified and directed by Engineer-in-charge. (Drg No. FD-1007).

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge. (Drg No. FD-1007).

Material & labour for painting to the frame of table with one coat of synthetic enamel paint olive Green all as per specified and directed by Engr-in-Charge. (Drg No. FD-1007).

TABLE 3' X 3' STEEL

Removing unserviceable top of table and S&F new top to table steel made out of 18mm thick prelaminated particle board exterior grade with 6mm thick teak wood beading edging alround the top all as per specified and directed by Engr-in-Charge. (Drg No. FD-1009).

Repairing frame of table with new 25mm square MS tube of 1.6 mm thick by arc welding where ever required as directed by Engr-in-Charge. (Drg No. FD-1009).

Material & labour for painting to the frame of table with one coat of synthetic enamel paint olive Green all as per specified and directed by Engr-in-Charge. (Drg No. FD-1009).

LOCKER BED SIDE STEEL

Removing unserviceable legs of locker and S&F new legs made out of 1mm thick MS sheet as existing by welding / revitting as per drg and as directed by Engr-in-Charge. (Drg No. FD-1029).

Removing unserviceable shelves from locker bed side steel. S& F of new shelves made of 1.00mm thick MS sheet of same shape & size as existing all as per specified and directed by Engr-in-Charge. (Drg No. FD-1029).

Removing unserviceable hasp and staple of locker and S&F new hasp and staple of same shape & size as existing and as per drg and all as specified and directed by Engr-in-Charge. (Drg No. FD-1029).

Removing unserviceable handle from locker bed side steel. S&F new steel handle 100mm long of approved make all as specified and directed by Engr-in-Charge. (Drg No. FD-1029).

Removing old unserviceable hanging rod S&F new hanging rod CP of 20mm dia to locker approved all as specified and directed by Engr-in-Charge. (Drg No. FD-1029).

M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and as directed by Engr-in-Charge. (Drg No. FD-1029).

CHAIR EXECUTIVE REVOLVING STEEL (TP)

Removing old unserviceable seat of chair executive and S&F new seat made out of 12 mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam with PVC lipping all around all as existing and as directed by Engr-in-Charge.

Removing old unserviceable back of chair executive and S&F new back made out of 12 mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam with PVC lipping all around all as existing and as directed by Engr-in-Charge.

Taking out old unserviceable castors wheel from executive chair and S & F new twin wheel castors as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

Removing unserviceable gas lift and S&F new gas lift of 100mm stroke length and gas pressure of 300n force as existing all as specified and as directed by Engr-in-Charge.

CHAIR WRITING STEEL

Taking out old unserviceable cantilever type MS frame from chair and S & F new cantilever type ms tubular frame made out of 25mm x 10mm sec as per existing size and shape complete all as specified and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-12).

Removing old unserviceable seat of chair steel and S&F new seat made out of 12 mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam with PVC lipping all around all as existing and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-12).

Removing old unserviceable back of chair steel and S&F new back made out of 12 mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam with PVC lipping all around all as existing and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-12).

Removing unserviceable armrest and S&F new one piece armrest made of black integral skin polyurethane with MS insert to the chair as existing with appropriate size bolt and nuts as specified and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-12).

CHAIR COMPUTER

Removing old unserviceable seat of chair computer and S&F new seat made out of 12 mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam with PVC lipping all around all as existing and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-1).

Removing old unserviceable back of chair computer and S&F new back made out of 12 mm thick hot pressed ply wood upholstered with fabric & moulded polyurethane foam with PVC lipping all around all as existing and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-1).

Taking out old unserviceable castors wheel from chair cpmputer and S & F new twin wheel castors as per existing size and shape complete all as specified and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-1).

Removing unserviceable gas lift and S&F new gas lift of 100mm stroke length and gas pressure of 300n force as existing and as directed by Engr-in-Charge. (Drg No. FD/E6/MAP-1).

PAINTING OF STEEL FURNITURE: M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying two coats of synthetic enamel paint of required colour internally and externally by spray painting complete all as specified and as directed by Engineer-in-Charge:-

Side rack steel 3 spaces (Drg No. FD-1023)

Trestle store room steel (Drg No. FD-1043)

Rack steel 1830x760x1905mm (Drg No. FD-129(M))

Rack 6 tier steel (Drg No. FD-1038)

Techno India Enterprises

KASHMA BUILDERS