Infrastructure works for use of Office space at 2nd and 3rd floor,CCE Building

Amount

COMPUTER TABLE Providing making & supplying computer table made out of 19mm commercial ply for table top including making curves as per site condition, mounted on the vertical side of 19mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves & shutters making concealed monitor arrangement by providing 8mm thick clear glass on table top of required size with edge polish with drawers and ready made key board drawer with heavy sliding channels with powder coated handle for shutter,cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.5mm thk laminate of approved colour and non laminated area should be french polished inclu. cost of other materials labor etc. as per drawing and as specified and directed by Engineer-In-Charge. Computer Table with all inner surface with 1mm thk approved laminate.

Providing & fixing cabinet With shutter made up of 19 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8mm commercial ply approved make for back side Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.5mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per site condition or approved by Engineer-In-Charge etc.and with inner side 0.8mm thk Laminate all exposed edges lipping with 6mm Thick T.W. lipping patti.locking arrangement with Godrej multipurpose lock etc. all complete as specified & directed by Engineer In-Charge.

Storage Unit for Labs: Providing and fixing Storage Unit Twin type unit of all sizes as per site condition, partly drawer partly shelve of fully drawer with heavy duty sliding channel unit made out of 19mm thick commercial ply for sides shelves, shutter, drawer front & sides with 8mm thk. ply for back side of unit with shelves all sides top bottom All exposed faces should be 1.5mm thick approved laminate and balance area should be 1mm thick lamination or two coat french polish strictly as per the instruction of Engineer-incharge including using heavy duty hardware like hinges,tower bolts of Archies make and Godrej multipurpose lock with powder coated C type handle as per required shed etc. complete all as specified & directed by Engineer-In-Charge

Providing and fixing SOFT BOARD: 12mm thick soft board pasted with approved adhesive and covered with tepestary felt cloth (Jute fibre) of required colour including removing old soft board if necessary &refixing etc. complete as specified and directed

Removing of Existing false ceiling & Existing AC duct (if any) and stacking the serviceable material as directed by EIC.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm [Armstrong make] in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of Aluminum sheet having electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Supply and fixing of 25mm thick duly laminated aluminum foil of matt finish closed cell Nitrile rubber ( Class "O" insulation of existing duct/ surface after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50mm wide and 3 m thick self adhesive nitrile rubber tape insulation complete as specified and directed by Engineer-in-charge.

Providing & fixing in position/flush door of shutters 25mm thick block board solid core internally lipped bonded with water proof type synthetic resin hot pressed with marine ply finished on both faces including prov. And fixing teak wood 20mm thick lipping on all sides fixing heavy duty approved make 4 levers mortice lock with pair of handle of approvd make & quality brass/S.S . fittings such as hinges, tower bolts, of approved make fixing fixtures locking arrangements with fixing fixture locking arrangements with screws etc. Door shutter with locking arrangement of S.S.aldrop 12” long, applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge.

Providing & fixing door closer arm of Everite/Hyper make for door closer No. 2 & 3 with necessary alignment of door shutter etc. complete as specified & directed by Engineer-In-Charge.

Providing and fixing vertical blinds (Premier Quality) 100mm regular quality make made from 100% polyster yarn coated with fade resistance polymer to ensure minimum light transmittance having suitable coating on exterior in all respect as per design and instruction of EIC. Scope also includes removing of existing blinds and handing over to the concerned engineer or disposing the same as per the instructions of Engineer-incharge.[AS PER SAMPLE AVAILABLE AT SITE] [Payment will be made on actual Mesurement basis. Windows mesurement to be taken before installation of roller blinds for achieving one piece work. ]

Providing & fixing Roller blinds (Premium quality) of approved make with heavy duty roller brackets & necessary fixtures. Warranty for roller mechanism & others accessaries shall be for One year from date of installation. [AS PER SAMPLE AVAILABLE AT SITE] [Payment will be made on actual Mesurement basis. Windows mesurement to be taken before installation of roller blinds for achieving one piece work. ]

Providing & Applying two coats of primer & thereafter two coats of premium interior grade acrylic emulsion plastic paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ Berger/ Dulux to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors, canopies, staircase rooms, lobbies etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproof putty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors,aluminium window frame & glass etc as to the entire satisfaction of engineer in charge

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.

Supply ,Installation,Testing & Commisioning of LED shaped 36 Watt 2ft x 2ft Premium Range Recessed Downlighter having pressure die-cast aluminimum housing with white front bottom frame suitable to following features. LED fixture to be fixed surface of concealed as per site requirement. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 1800 lumens -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -High diffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4000K to 5000K LED concealed square type / round type , seemless, high efficiency and premium range as per technical specification directed by OIC - ES

SITC of 22W LED light fixture including Ceiling rose and all fixing accessories

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box , and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

SITC of Secondary point light to light looping light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

3 Module

6 Module

8 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

SITC of 20 Amps 2 Pin + Earth reroll type Crompton/ MDS or approved make metalic sockets- 1 NO //// 20 Amps MDS make DP MCB with separate Neutral link as controling S/W - 1No.//// 20 Amps metalic top- 1 No. for above socket.

40 Amps 2 Pin + Earth (AS 20) reroll type Crompton/ MDS or approved make metalic sockets- 1 NO //// 20 Amps MDS make DP MCB with separate Neutral link as controling S/W - 1No.//// 20 Amps metalic top- 1 No. for above socket.

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

SITC of CAT 6 LAN cable for DATA including 25mm PVC Conduit Supply ,Installation,Testing & Commisioning of of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required.

Telephone

SITC of Analogue key pad type caller ID telephone instruments including 2 pair wire and connection jack

SITC of Telephone socket (RJ -11)including modular box , faceplate and connector, including all fixing accessories surface / recess type as directed by EI ES.

Fan and Accessories

SITC Supplying and erecting regular/ standard model high speed wall fan , sweep complete erected in position and all fixing accessories

SITC Supplying and erecting regular/ standard model Ceiling fan of 1200 mm. sweep complete erected in position including ceiling fan hook fixing , down rods , ceiling rose and all fixing accessories

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Electrical Wiring and PVC Conduits

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS /AC Normal Points Rate is for one mtr circuit

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire including PVC conduicts , bends , and all fixing accessories ( Rate is for one mtr circuit i.e. 3 x 2.5sqmm wire)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 50mm PVC conduit pipe

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessedconduit as required. 25mm PVC conduit pipe

Supply & Fixing of casing capping of 1.25 Inch with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.

SITC of heavy duty spike guard for computer

Power Distribution board and cables

DISTRIBUTION BOARDS Supply, installation, testing & commissioning of 500V Distribution Boards as speci- fied , 'i) Copper busbars together with tapped neutral bar for individual phases. , copper earth strip with tapping for EEC , Interconnections and earthing. Sheet steel enclosure suitable for recessed or surface mounting with hinged lockable doors interlocked. Thikness of 1.6mm , Phase to phase barriers in case of 3Ph boards. , 'vii) Necessary MS support frame & painting, labelling, phase indicating lamps with fuses etc. complete. 8 Way TPN DB light Distribution Board comprising of Incomer : i) 40 Amp TPN MCB+4P TYP-2 SPD 12KA ii) 3Nos, 32Amp DP ELCB(30 mA) Outgoing : i)16A SP MCB 18 NOS

Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, Aluminium stranded conductor, armoured, 1100 V class 4 x 16sqmm cable ALUMINIUM CABLE ARMOURED

Supplying & erecting heavy duty flange type brass cable glands for end jointing of various sizes for PVC armoured cable with brass washers, rubber rings complete with cable ends & leads connected, with gland double earthing, work completed in all respect all as per instructions and as directed by E-I-C, ES 4x 16sqmm cable gland

Supplying & erecting crimping type copper lugs confirming to IS suitable for cables up to 16 sq. mm evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners. all as directed by O-I-C, ES

SITC of GI wire 8 SWG, including all fixing accessories luggings, etc.

SITC of Modular type ding dong wired door bell with push button and internal wiring.

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire including PVC conduicts , bends , and all fixing accessories. ( Rate for one mtr circuit i.e. 3 x 1.5sqmm wire) for call bell wiring

arcoma

NIKHIL CONSTRUCTIONS CO