Construction of Passenger Bus Shelter at Trichy Road Near 80 Ft Road in Ward No.63, Central Zone.

Amount

Earth Work excavation in all soils with intial lead and lift etc.,

Cement concrete broken stone in cement mortar 1:4:8 Mix using 40 mm metal granite stone etc, complete

Supplying and erecting centering for sides and soiffits including supports and strutting upto 3.29m high for plane bottom slabs of boxing , sill slabs , sunshades etc, in all floors using mild steel sheets of size 90 cm * 60 cm and BG 10 Stiffened with welded mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over country wood joists of size 10 cm x 6.5 cm spaced at about 90 cm centre to centre and supported by casuarina props of 10 cm to 13 c m dia spaced at 75 cm centre to centre etc., complete as directed.

centering with steel plates for sides & Soffits etc., complete

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC Slabs etc, as per slabs etc., as standard Specification etc, complete

Reinforced cement concrete 1:1.5:3 M20 ( one part of cement one half parts of sand three part ) of 20 mm hard blue granite metal by volume , characteristic strength not less than 20N/ sq mm machine mixed for all reinforced cement concret works including scaffolding , cost of all materials machine mixing vibrating , lifting, curing , labour charges for laying & finishing etc but excluding centering and from work etc., complete complying with the relvant standard specifications at all leads inside the lift building

Supplyand fabrication of RTS rods in various dia including cutting, bending and tying with all labour charges etc., complete

Fly ash brick work in CM 1:5 (one cement and five sand ) using size 9x4 3/8x2 3/4 including finishing curing etc., complete complying with standard specification

Pre-polished concrete anti skid step tiles of 20 mm thick

Paving the floor with GRANITE SLAB (SUPER FINE POLISHED WITH MACHINE CUT EDGES) of sizes 1.2m x 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the granite slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete. For JET BLOCK COLOUR.

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification etc., complete as directed by the departmental officers.

Plastering with cement mortar 1:5 mix (one cement, five sand) to 12mm thick including cost and conveyance of all materials , finishing , curing and all labour charges etc., complete as standard specification

Plastering with cement mortar 1:3 mix (one cement, three sand) to 12mm thick including cost and conveyance of all materials , finishing , curing and all labour charges etc., complete as standard specification

Painting with plastic emulsion paint in two coats over a base coat od primer in approved colour and qulaity etc., complete

Painting with enamel paint two coats over a base coat of approved colour etc., complete

Supply and fixing of MS sheet doorsand grills including one coat of red oxide paint etc., complete

Filling with quarry rubbish including watering and consolidation

Filling with M sand including watering and consolidation including labour charges etc., complete

Supply and fixing of perforated chairs as per the direction of departmental officers etc., complete

Supply and fixing of decorative pressed tiles of 12 mm thick of all sizes and shapes as per direction of departmental officers etc., complete

Supplying and laying TAMIN Block providing and laying of 80 mm thick high strength type conforming IS 15658-2006 of TAMIN paver block in size of minium compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform sharp of approved non skiting surface in the top and the rate including leveling the base stone dust cushion 150 mm thick laying out of pavement cut the pieses to fix the edge vibring the paversl sweeping transporting loading unloding of laying paver block as per the standard specification

Manufacturing supplying and fixing of stainless steel hand rails for staircase using 50 mm dia 304L grade stainless steel pipe of 1.60 mm thick at required locations to a height of 900 mm from finished floor level welded to 38 mm dia stainless steel pipe post of 1.00 mm thick as vertical at 900 mm centre with 2 nos of 25 mm dia intermediate horizontal stainless steel pipe of 1.60 mm thick in between. The vertical pipe has to be welded to the 100x100x6 mm MS base palte encased in the base concrete.The rate is inclusive of the charges for cutting bending welding grinding polishing conveyance electrical charges etc., complete

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A neutral link and earth link (1”x1/8” copper flat) on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1” thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW Switch box in flush with wall with 5A.F.T. Switch, covered hylum sheet of 3mm thick with painting of suitable colour; with continuous earth wire connection of 14 SWG TC wire for open PVC light point/Fan point(For Electronic Regulator)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories inflush with wall with 150mmx100mmx75mm MS switch box with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.(SD-12)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD-44)

Supply and fixing of 4’40W twin street light flu. Fitting complete with copper choke and condenser with 32mm dia GI pipe (Class ‘B’) with 1 No. 32mm GI bend complete on the existing post wall with 16A aerial fuse unit on Ms plat with PVC unsheathed copper leads MS clamps and aluminium painting with flu. Tubes

Earthing as per ISI specification with an earth electrode of 2.1mt class ‘B’ GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Tamil letter wiriting works using brass letters 20 cm height etc., complete and coimbatore corporation sympols

Terrace flooring with one course of pressed tiles of size 23x23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

T.L.NARAYANASAMY (BID ID -1163006)