REPAIR AND MAINTENANCE OF EXTERNAL WATER SUPPLY SYSTEM INCLUDING INSTALLATIONS UNDER GE (S) JAIPUR AT MIL STN JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

M&L in repair for 80mm bore sluice valve, class PN 1.6 with cast iron body with forged steel spindle, non rising type and cast iron head both end flanged, as per IS-14846 with neoprene rubber gasket jointing material and including nut / bolt / washer of suitable size etc complete all as specified and directed.

M&L in repair for 100mm bore sluice valve, class PN 1.6 with cast iron body with forged steel spindle, non rising type and cast iron head both end flanged, as per IS-14846 with neoprene rubber gasket jointing material and including nut / bolt / washer of suitable size etc complete all as specified and directed.

M&L in repair for 150mm bore sluice valve, class PN 1.6 with cast iron body with forged steel spindle, non rising type and cast iron head both end flanged, as per IS-14846 with neoprene rubber gasket jointing material and including nut / bolt / washer of suitable size etc complete all as specified and directed.

M&L in repair for 80mm bore Non-Return Valve (NRV), class PN 1.0 with cast iron body with both end flanged, as per IS-14846 with neoprene rubber gasket jointing material and including nut / bolt / washer of suitable size etc complete all as specified and directed.

M&L in repair for 100mm bore Non-Return Valve (NRV), class PN 1.0 with cast iron body with both end flanged, as per IS-14846 with neoprene rubber gasket jointing material and including nut / bolt / washer of suitable size etc complete all as specified and directed.

M&L in repair for 150mm bore Non-Return Valve (NRV), class PN 1.0 with cast iron body with both end flanged, as per IS-14846 with neoprene rubber gasket jointing material and including nut / bolt / washer of suitable size etc complete all as specified and directed.

M&L in repair for 80mm bore Butterfly Valve of cast iron body , ISI marked with all fittings / accessories and including nut / bolt / washer of suitable size etc requried for fixing in existing header complete all as specified and directed.

M&L in repair for 100mm bore Butterfly Valve of cast iron body , ISI marked with all fittings / accessories and including nut / bolt / washer of suitable size etc requried for fixing in existing header complete all as specified and directed.

M&L in repair for 150mm bore Butterfly Valve of cast iron body , ISI marked with all fittings / accessories and including nut / bolt / washer of suitable size etc requried for fixing in existing header complete all as specified and directed.

S&F in repair 80mm dia MS saddle piece of MS flat iron 50x6mm with GI socket, weld it on one FI strip at suitabe position (the centre of pipe), MS nuts, bolts, washers (02 Nos) and rubber packing for branch connection complete all as specified and directed.

S&F in repair 100mm dia MS saddle piece of MS flat iron 50x6mm with GI socket, weld it on one FI strip at suitabe position (the centre of pipe), MS nuts, bolts, washers (02 Nos) and rubber packing for branch connection complete all as specified and directed.

S&F in repair 150mm dia MS saddle piece of MS flat iron 50x6mm with GI socket, weld it on one FI strip at suitabe position (the centre of pipe), MS nuts, bolts, washers (02 Nos) and rubber packing for branch connection complete all as specified and directed.

M&L for drilling hole under road / any type of floor for laying of pipe upto 150mm dia complete all as specified and directed.

M&L for supply of 5000 litre water in water tank at Bhakrota Military Station / Holidays Home during failure of existing borewell / pump complete all as specified and directed.

M&L for repair of existing header, jointing, welding of pipe line with header including required material such as Tee / Long/Short MS bend coupler / flange / nuts bolts / washer / rubber gasket kit as per existing pipe upto size of 150mm bore and necessary earth work etc. and commissining and testing of pipe line complete all as specified and directed.

Supply and use of bleaching powder grade-I having chlorine content 35% dry and white free flowing powder without hard lumps and impurities and easily soluble in water complete all as specified and as per direction of Engineer-in-Charge. Note : The material should not contain more than 0.3% moisture particle size passing through - 1.70 mm IS sieve and stability loss of chlorine should be maximum 1/15th.

S&F shaft bush for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

S&F rubber gasket 3mm thick having 4 nos of 5/8" dia hole for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

S&F shaft coupling with key for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

S&F steel sleave for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

M&L for cutting of burnt winding and re-winding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc. for 10 HP to 20 HP submersible pump set motor complete all as specified

S&F in repair micro pressure based relay 08 to 40 Amp for DOL starter complete all as specified and directed.

S&F in repair single phase preventor for the motors upto capacity 30 HP as per existing complete all as specified and directed.

M&L for calcium based high strength granular chlorination chemical (calcium hypochlorite having chlorine 65% to 70% ) for water treatment. complete all as specified and directed. Note : (i) Granular material shall be free of foreign material decomposing at 177 Celsius soluble in water and alcohol not hygroscopic practicaly clear in water solution at saturation level. (ii) The material should not contain more than 10 % moisture. (iii) Granular size should be as follows: Mesh passing through -100 BSS 1.5 % maximum iron as Fe 0.05% maximum Mn 40 PPM maximum Mol wt 142.98. Toxicity :Oral rate LD 50-850 mg/Kg duly tested from approved laboratory packed in a fibre drum duly sealed granular type from manufacturer or authorised dealer/distributor. (iv) Brand name/batch number and particulars of manufacturer should be printed on the container / packing.

S&F in repair for Direct-On-Line (DOL) starter, suitable for upto 5 HP 1/3 phase, 230/415 volts AC supply motor complete all as specified and directed.

S&F in repair fully automatic star delta starter for 5 HP to 7.5 HP capacity motor for centrifugal / submercible pump with range of phase current from 9-13 A comprising of combo volt and ammeter single phase preventor, over load relay and timer housed in MS sheet power coated enclosure complete all as specified and directed.

S&F in repair fully automatic star delta starter for 10 HP to 12.5 HP capacity motor for centrifugal / submercible pump with range of phase current from 16-22 A comprising of combo volt and ammeter single phase preventor, over load relay and timer housed in MS sheet power coated enclosure complete all as specified and directed.

S&F in repair fully automatic star delta starter for 15 HP to 25 HP capacity motor for centrifugal / submercible pump with range of phase current from 25-30 A comprising of combo volt and ammeter single phase preventor, over load relay and timer housed in MS sheet power coated enclosure complete all as specified and directed.

S&F in repair for column pipe both side flanged, GI medium grade of size 80 mm bore, ISI marked (length 3m each) including taking out old corroded column pipe complete all as specified and directed.

M&L for servicing of chlorine dosing system of any make and any capacity including rewinding of pressure pump of any capacity and duly paint by two coat of synthetic enamel paint complete all as specified and directed. Note : (i) The cost for dismantalling all connections from existing pipe lines and re-assembling after proper servicing shall be included in above quoted rate. (ii) The cost of metal clad box with 20 Amp MCB and electric wiring with 3 core 4 sqmm copper cable shall be included in above quoted rate.

M&L for dewatering of over head water tank of 1.0 Lakh litre capacity and cleaning with bleaching powder first and thereafter cleaning with the plain / normal water complete all as specified and directed. Note : (a) The Job should be completed within 08 hour of time after taking over the site. (b) The cost for necessary tools and plant (T&P) and scaffolding for cleaning of over tank / sump if required, diesel operated pump set, hose pipe and bleaching powder required for cleaning to be brought by contractor and shall be deemed to included in quoted rate. (d) The date of cleaning should be writtern with synthetic enamel paint in white letter not less than 10 cm height with black base as directed by Engineer-in-charge.

M&L for dewatering of underground sump of 1.0 Lakh litre capacity and cleaning with bleaching powder first and thereafter cleaning with the plain / normal water complete all as specified and directed. Note : (a) The Job should be completed within 08 hour of time after taking over the site. (b) The cost for necessary tools and plant (T&P) and scaffolding for cleaning of over tank / sump if required, diesel operated pump set, hose pipe and bleaching powder required for cleaning to be brought by contractor and shall be deemed to included in quoted rate. (d) The date of cleaning should be writtern with synthetic enamel paint in white letter not less than 10 cm height with black base as directed by Engineer-in-charge.

M&L for testing of water sample from different locations under GE South Jaipur from authorised State Govt Lab / Central Govt Approved lab as per IS-10500 (2012) for drinking water complete as per specified and directed. Note:- The sample will be collected as per requirement from different locations and water test report shall be submitted to AGE E/M-III office within 07 days from date of sample collection.

M&L for dismantling of centrifugal pump / mono block set of capacity 0.5 HP to 5.0 HP, 1 phase or 3 phase, 230V / 415V, 50Hz, AC supply after disconnecting electric connection, for repairing / replacing the defective parts as ordered including re-assembling, testing, replacing worn out nuts, bolts, washers, lowering the same, reconnecting to pipe line and electric connection after repair complete all as specified and directed. Note : (i) The spare part required for replacement shall be measured & paid separately under respective items as supply and fixing. (ii) The transportation cost deemed to be included in quoted rate.

M&L for oiling and greasing of mono block / centrifugal pump set of capacity 0.5 HP to 5.0 HP complete all as specified and directed.

S&F ball bearing for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

S&F stainless steel pump shaft for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

S&F Gun metal impller with neck key and distance bush for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

S&F coupling with cover for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

S&F damaged MS love joint star rubber disc for 0.5 HP to 5.0 HP mono block / centrifugal pumpset motor complete all as specified and directed.

S&F flange joints as per existing for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

S&F fan blade as per existing for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

S&F steel pipe for watering the gland packing as per existing for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

M&L for cutting of burnt winding and re-winding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc. for 0.5 HP to 5.0 HP mono block / centrifugal pump set motor complete all as specified and directed.

M&L for dismantling of centrifugal pump set of capacity 7.5 HP to 12.5 HP, 3 phase, 415 volts, 50Hz, AC supply after disconnecting electric connection, for repairing / replacing the defective parts as ordered including re-assembling, testing, replacing worn out nuts, bolts, washers, lowering the same, reconnecting to pipe line and electric connection after repair complete all as specified and directed. Note : (i) The spare part required for replacement shall be measured & paid separately under respective items as supply and fixing. (ii) The transportation cost deemed to be included in quoted rate.

M&L for oiling and greasing of centrifugal pump set of capacity 7.5 HP to 12.5 HP complete all as specified and directed.

S&F ball bearing for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F stainless steel pump shaft for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F Gun metal impller with neck key and distance bush for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F coupling with cover for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F damaged MS love joint star rubber disc for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F flange joints as per existing for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F fan blade as per existing for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F steel pipe for watering the gland packing as per existing for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

S&F base stand for motor with new nut, bolt & washers as per existing for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

M&L for cutting of burnt winding and re-winding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc. for 7.5 HP to 12.5 HP centrifugal pump set motor complete all as specified and directed.

M&L for dismantling of centrifugal pump set of capacity 15 HP to 30 HP, 3 phase, 415 volts, 50Hz, AC supply after disconnecting electric connection, for repairing / replacing the defective parts as ordered including re-assembling, testing, replacing worn out nuts, bolts, washers, lowering the same, reconnecting to pipe line and electric connection after repair complete all as specified and directed. Note : (i) The spare part required for replacement shall be measured & paid separately under respective items as supply and fixing. (ii) The transportation cost deemed to be included in quoted rate.

M&L for oiling and greasing of centrifugal pump set of capacity 15 HP to 30 HP complete all as specified and directed.

S&F ball bearing for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F stainless steel pump shaft for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F Gun metal impller with neck key and distance bush for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F coupling with cover for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F damaged MS love joint star rubber disc for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F flange joints as per existing for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F fan blade as per existing for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F steel pipe for watering the gland packing as per existing for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

S&F base stand for motor with new nut, bolt & washers as per existing for 15 HP to 30 HP centrifugal pump set motor complete all as specified and directed.

M&L for cutting of burnt winding and re-winding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc. for 15 HP to 30 HP centrifugal pump set motor complete all as specified

S&F terminal box including connectors of copper plate of motor complete all as specified and directed.

M&L for preparation of old painted steel surface of pump and motor and applying two coats of synthetic enamelled paint after applying one coat of red oxide primer complete all as specified and directed.

M&L for dismantling of submersible pump set of capacity 05 HP to 20 HP, 1 phase / 3 phase, 230V / 415V, 50Hz, AC supply after disconnecting electric connection, for repairing / replacing the defective parts as ordered including re-assembling, testing, replacing worn out nuts, bolts, washers, lowering the same, reconnecting to pipe line and electric connection after repair complete all as specified and directed. Note : (i) The spare part required for replacement shall be measured & paid separately under respective items as supply and fixing. (ii) The transportation cost deemed to be included in quoted rate.

S&F thrust bearing with plate for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

S&F stainless steel pump shaft for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

S&F Gun metal impller with neck key and distance bush for 05 HP to 20 HP submersible pump set motor complete all as specified and directed.

M&L brick masonry valve chamber of size 900mm x 900mm x 900mm internally including excavation & earth work, PCC (1:3:6), plaster in CM 1:6 on inside & outside (above ground), angle iron frame 40 x 40 x 4 mm size including fabrication work, hold fast, 3mm thick MS sheet cover with 40mm dia Godrej Pattern locking arrangement, duly painted with one coat of black bituminious paint of approved quality, handle complete all as specified and shown on drawing.

M&L brick masonry valve chamber of size 1200mm x 1200mm x 900mm internally including excavation & earth work, PCC (1:3:6), Plaster in CM 1:6 on inside & outside (above ground), angle iron frame 40 x 40 x 4 mm size including fabrication work, hold fast, 3mm thick MS sheet cover with 40mm dia Godrej Pattern locking arrangement, duly painted with one coat of black bituminious paint of approved quality, handle complete all as specified and shown on drawing.

M&L for leakage rectification, cutting of existing pipe of 20mm bore GI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed.

M&L for leakage rectification, cutting of existing pipe of 25mm bore GI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed.

M&L for leakage rectification, cutting of existing pipe of 50mm bore GI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed.

M&L for leakage rectification, cutting of existing pipe of 80mm bore GI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed.

M&L for leakage rectification, cutting of existing pipe of 100mm bore GI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed.

M&L for leakage rectification, cutting of existing pipe of 150mm bore GI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed.

M&L for leakage rectification, cutting of existing pipe of 80 to 100mm bore CI / DI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. pipe in start length, rubber, gasket saddle piece, nut bolt, washer and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed. Notes: (i) The cost of pipe upto 2m length, fittings, and welding deemed to be inluded in quoted rate. (ii) Each Job should be completed within 8 hours. (iii) The rectification should be maintained for minimum one year. (iv) D-Joint, Saddle piece should be measured in the respective item of schedule. (v) The Job location shall contain flange pipes in overhead tanks or in underground sumps.

M&L for leakage rectification, cutting of existing pipe of 150mm bore CI / DI pipe and making threading for repair/ replacement of unserviceable fittings like Tee, Elbow / Sockets / Union / Nipple etc. pipe in start length, rubber, gasket saddle piece, nut bolt, washer and making it in serviceable condition including testing and necessary excavation as required complete all as specified and directed. Notes: (i) The cost of pipe upto 2m length, fittings, and welding deemed to be inluded in quoted rate. (ii) Each Job should be completed within 8 hours. (iii) The rectification should be maintained for minimum one year. (iv) D-Joint, Saddle piece should be measured in the respective item of schedule. (v) The Job location shall contain flange pipes in overhead tanks or in underground sumps.

M&L in repair for cast iron fittings 150 to 300 mm bore for spigot socketed pipes such as bends (any type ,radius and angle) tapers any type (straight, bends, increasing, decreasing or double socket etc) Tee pieces, single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps or plugs complete all as specified and directed.

Taking up or down cast iron(CI) / Ductite Iron (DI) water mains (including all fittings) of 80 mm bore , from trenches under floor / road complete all as specified and directed. Note : Earthwork shall be measured and paid seperately.

Taking up or down cast iron(CI) / Ductite Iron (DI) water mains (including all fittings) of 100 mm bore , from trenches under floor / road complete all as specified and directed. Note : Earthwork shall be measured and paid seperately.

Taking up or down cast iron(CI) / Ductite Iron (DI) water mains (including all fittings) of 150 mm bore , from trenches under floor / road complete all as specified and directed. Note : Earthwork shall be measured and paid seperately.

S&F in repair 80mm dia detachable joint suitable for GI / CI / DI pipe with cast iron ring , rubber rings, nut, bolts, including excavation and earthwork if required, cutting of pipe etc. complete all as specified and directed.

S&F in repair 100mm dia detachable joint suitable for GI / CI / DI pipe with cast iron ring , rubber rings, nut, bolts, including excavation and earthwork if required, cutting of pipe etc. complete all as specified and directed.

S&F in repair 150mm dia detachable joint suitable for GI / CI / DI pipe with cast iron ring , rubber rings, nut, bolts, including excavation and earthwork if required, cutting of pipe etc. complete all as specified and directed.

Supply, laying, testing & commissioning in trenches in existing or diverted routes, DI (ductile iron) pipe (centrifugal cost spun ductile iron pressure pipe) ,conforming to IS 8329 (2000) class K-7 and as per latest amendment in any length for 80 mm bore pipe and providing suitable rubber gasket joint etc complete all as specified and directed. Note :- (1) Earthwork shall be measured and paid seperately. (2) The cost of casting joint including materials shall deemed to be included in the quoted rate.

Supply, laying, testing & commissioning in trenches in existing or diverted routes, DI (ductile iron) pipe (centrifugal cost spun ductile iron pressure pipe) ,conforming to IS 8329 (2000) class K-7 and as per latest amendment in any length for 100 mm bore pipe and providing suitable rubber gasket joint etc complete all as specified and directed. Note :- (1) Earthwork shall be measured and paid seperately. (2) The cost of casting joint including materials shall deemed to be included in the quoted rate.

Supply, laying, testing & commissioning in trenches in existing or diverted routes, DI (ductile iron) pipe (centrifugal cost spun ductile iron pressure pipe) ,conforming to IS 8329 (2000) class K-7 and as per latest amendment in any length for 150 mm bore pipe and providing suitable rubber gasket joint etc complete all as specified and directed. Note :- (1) Earthwork shall be measured and paid seperately. (2) The cost of casting joint including materials shall deemed to be included in the quoted rate.

Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed

M&L run lead joint for 80 mm bore spigot and socket pipes CI pipe complete all as specified and directed.

M&L run lead joint for 100 mm bore spigot and socket pipes CI pipe complete all as specified and directed.

M&L for taking out sluice valves refacing, regrinding and refixing after repacking stuffing box of sluice valve spindle including taking apart and reassembling for the 80 mm bore of pipe complete all as specified and directed.

M&L for taking out sluice valves refacing, regrinding and refixing after repacking stuffing box of sluice valve spindle including taking apart and reassembling for the 100 mm bore of pipe complete all as specified and directed.

M&L for taking out sluice valves refacing, regrinding and refixing after repacking stuffing box of sluice valve spindle including taking apart and reassembling for the 150 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings laid in trenches of 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings laid in trenches of 25 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings laid in trenches of 40 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings laid in trenches of 50 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 25 or 32 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 40 or 50 mm bore of pipe complete all as specified and directed.

Dismantling water tanks of any description, capacity exc 250 and not exc 500 litres and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed

S&F in repair bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 25 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 40 mm bore dia of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 50 mm bore dia of pipe complete all as specified and directed.

S&F in repair ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 15 mm bore of pipe complete all as specified and directed.

S&F in repair ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore dia of pipe complete all as specified and directed.

M& L in repair for existing MS pits / tank cover of size 100mm x 600mm, including of unserviceable hinghes, hook, welding work and applying one coat of synthetic enamel black paint complete all as specified and directed.

S&F in repair contactor 100 Amp 4 Pole as per existing panel complete all as specified and directed.

S&F in repair contactor 200 Amp 3 Pole as per existing panel complete all as specified and directed.

S&F in repair for ampere meter with CT of range 0-30 amps as per existing complete all as specified and directed.

S&F in repair for voltmeter with PT of range 0-500 volt as per existing complete all as specified and directed.

S&F in repair for over load relay coil 37-50 Amp, 230 volts type RT23V as per existing. complete all as specified and directed.

S&F in repair for existing Panel Box upto size 1.2 x 0.4 x 1.5 meter with new bus-bar (upto 10 Kg) suitable for existing fittings / fixtures complete all as specified and directed.

Supply and fix jointing kit for submersible cable of 1100 volts grade of 4/6 sqmm 3 core. complete all as specified and directed.

M&L for radium type location sign board, green colour, 1200 mm x 900 mm x 3mm board size of stainless steel plate, two stainless steel pipe of 2.5 m long and 50 mm dia, medium grade pipe and write word with reflector radium and including PCC (1:2:4) in foundation complete all as specified and directed. Note:- (i) The cost for excavation & related earth work deemed to be included in quoted rates. (ii) The size and shape of letter shall be as per sample approved by GE.

S&F First Aid chart printed on A-0 size paper (841 x 1188 mm), duly plastic laminated and fixed inside a wooden / PVC photo frame of 50 mm width with 3 mm sheet glass and 6 mm plywood backing and suitable hanging arrangement to wall with hookes / steel chain etc, complete all as specified and directed.

M&L in repair for PVC sheathed with multistranded copper conductor of 04 Sqmm 03 Core size complete all as specified and directed.

M&L in repair for PVC sheathed with multistranded copper conductor of 06 Sqmm 03 Core size complete all as specified and directed.

S&F in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of triple pole neutral (TPN) and 63 Amp current carrying capacity in the DB complete with connection testing and commissioning all as specified and directed.

SHREE BHAGWATI ENTERPRISES (BID ID -3487072)