Construction of Two Wheeler Parking Shed at New Gate Complex inside the Port

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as directed at site including all labour, materials, tools, equipments, etc. complete.

Earthwork excavation in soil for foundations, footing, where ever required including dressing of sides and ramming of bottoms, including shoring, struting, pumping, bailing, wherever necessary, including getting out the excavated soil and disposal of surplus excavated soil as directed at site including all labour, materials, tools, equipments, etc. complete.

Filling available excavated earth in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, as directed at site including all labour, materials, tools, equipments, etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level with CC 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size) as directed at site including all labour, materials, tools, equipments, etc. complete.

For Foundation works

For RCC Flooring works

Providing Centering and shuttering including strutting, propping etc. and removal of form work as directed at site including all labour, materials, tools, equipments, etc. complete.

For Foundation

For Columns

Providing and laying M25 grade concrete (with 325Kg / Cum) admixed with ceraplast 300 (superplasticiser) at 300ml per bag of cement and all as per relevant specifications as directed as site including mixing, transporting, placing, vibrating, curing etc., including all materials, labour, tools, equipment, machinery, fuel etc., complete. Note: Steel reinforcement and Centering & shuttering shall be measured and paid separately under relevant item of this schedule

For Foundation

For Columns

Supplying and providing Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars (FE-500) as per releveant IS all complete and as directed at site including all labour, materials, tools, equipments, etc. complete.

Providing Brick work with bricks of class designation 100A for curb walls and wherever required etc., in Cement mortar 1:6 (1 cement: 6 coarse sand ) as directed at site including all labour, materials, tools, equipments, etc. complete.

Preparing the surfaces of brickwork and providing plastering in cement mortar 1:4 (1 cement: 5 fine aggregate) 15 mm thick to the required finish, curing etc., all as per relevant specification and as directed at site including all labour, materials, tools, equipments, etc. complete.

Supplying, fabricating and fixing MS Structural sections, Hollow sections etc., for Trusses, Purlins, Columns, Gusset plates, Base plates etc., by cutting, welding, with Bolts & Nuts etc. or as specified in position as directed at the site, including cutting, hoisting, fixing in position by welding/ full strenght butt welding/bolting/riveting etc. or as specified, and as directed including all labour, materials, tools, equipments, tackles, scaffolding etc., complete. Note: The MS Structural sections etc., should be get approved by the Engineer-in-Charge

Painting the MS Structural Members with 2 coats of coal tar epoxy paint 100 micron dry film over coat of zinc rich epoxy primer 40 micron all as directed including all labour, materials, tools, equipments, tackles, scaffolding etc., complete. Note: The brand and shade of the Primer and Paint should be get approved by the Engineer-in-Charge

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all labour, materials, tools, equipments, tackles, scaffolding etc., complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including all labour, materials, tools, equipments, tackles, scaffolding etc., complete. For Gutter (600 mm over all girth)

Providing, fixing, testing and commissioning of PVC Rain Water Pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for rain water pipe lines laid in vertical shafts. ---- PVC Pipe 110 mm dia - 6 kg/sq.cm pressure rated

Karthikeyan Contractor

VKS INFRATEC PROJECTS

Krcontractor