Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹42.4 L+₹6.1 L (16.7%)Rejected-Finance | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹42.5 L+₹6.2 L (17.1%)Rejected-Finance 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L3 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
29 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
CERATAIN MISC SANCTION WORKS AT AGE B/R-I AND AGE E/M UNDER GE BABINA
2022_MES_560609_1
GE/BAB/TOKEN/50 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹88,000
Yes
3 Apr 2023
31 Oct 2022
1 Dec 2022
31 Oct 2022
29 Nov 2022
15 Nov 2022
Amount
Dismantling asbestos cement , galvalume , fiber sheet ( Plain , corrugated , semi corrugated ) complete all as specified and as directed.
S&F pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed to purlins with self tapping/SD screws complete all as specified and as directed.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engineer in charge.
S&F Mild steel works as in fillets, posts and struts, balusters, nosing to steps wind ties, purlines, grills, gratings guard bars etc incl securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to 410-0 or Fe 310-0, etc complete all as specified and as directed.
Demoliton of brick work or stone boulder masonry, built in cement mortar as in quins arches, pillers, parapet etc but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 etc complete all as specified and directed.
Description same as per item No 6 above but except brick.
Demolition of PCC of any description and in any position etc complete all as specified and as directed
M&L for 75mm thick cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement etc complete all as specified and as directed
M&L for 100mm thick cement concrete 1:2:4 type B-2, (using 40mm graded aggregate) as in floor/hard standing finished even and smooth without using extra cement etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed
S & F CRC sheet box type steel window/ventilator with steel handle, steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.
M&L two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.
M&L for cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed.
M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts, back filling of chowkats and mass concrete for pole etc complete all as specified and as directed.
S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed
Taking down cement plaster on brick or stone wall including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of conc/brick surfaces in CM 1:6, finish even and smooth without using extra cement complete all as specified and as directed.
M&L, Preparing new plastered/unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
Surface excavation n.exc 30cm deep, averaging 15cm depth and getting out in any type of soil complete all as specified and directed.
M&L, PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring,mass concrete for pole complete all as specified and directed.
M&L, sand filling under concrete interlocking paver block including watering & consolidation etc complete all as specified and as directed.
M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006, M-40 grade with grey cement & pigment etc complete all as specified and as directed.
M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping/ kerb/coping for pole complete all as specified and as directed.
Surface excavation n.exc 30cm deep, averaging 15cm depth and getting out in hard/dense soil complete all as specified and directed.
M&L for 40mm thick cement concrete 1:2:4 type B-1, (using 20mm graded aggregate) as in floor/hard standing finished even and smooth without using extra cement etc complete all as specified and as directed
Excavating in trenches not exc 1.5m wide and n. exc 1.5m in depth for foundation etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for Steel work in (tubular pipe square/round) in vertical post, rafter/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 etc for supporting tubular/square pipe rafters/purlins, special shape washer etc complete all as specified and as directed
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and as directed
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth and getting out in any type of soil complete all as specified and directed.
Returning, filling in including spreading, leveling , watering and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
M&L for brocken stone hardcore of gauge n exc 63mm, deposited, spread and levelled in layer n exc 15 Cm thick, watered and well rammed to true surfaces etc complete all as specified and as directed
M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying a coat of cement slurry with 3.0kgof cement per sq. metre etc complete all as specified and as directed
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165etc complete all as specified and as directed
S & F 1.2mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc complete all as specified and as directed
S&F in repair vitreous china wash hand basin white (flat back) of size (550 x 400mm) including cutting for and pinning in ends and CI brackets complete Incl waste pipe and waste coupling complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.
S&F 15mm bore cast copper alloy chromium plated angle cock with flange complete all as specified and as directed.
S&F 15mm bore fancy type chromium plated bib cock long body with flange complete all as specified and as directed.
S&F brass CP mixer 15mm bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed.
S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.
S&F CP towel ring complete all as specified and as directed.
S&F stainless steel kitchen plate rack overall size 900mm x 900mm made out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed.
S&F stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed.
S&F in repair 25 mm dia CP curtain rod with CP brackets and knob at both end as per sample approved by Engineer-in-charge.
S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or wall etc complete all as specified and direcetd.
Supplying, fixing, jointing and testing 15 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Taking down Cement Plaster from Brick or stone Wall,including Racking out Joints, hacking for Key, scrubbing down with Water etc., complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of wall finish even and smooth without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc including 15 mm screed bed with CM(1:4) complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in Skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc and icluding rendering 10 mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etc complete all as specified and as directed.
S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge.
M&L, PCC 1:2:4 type B1 using 20mm graded stone agg as in foundation and bed for embeding pipe complete all as specified and directed.
Excavating over areas, n exc 1.5m deep and getting out in any type of soil etc complete all as specified and as directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan in any radius in half brick thick wall, built in cement mortar 1:6 etc complete all as specified and directed.
Formwork to soffits of roof slab and chajjas etc thickness not exc 200mm thick complete all as specified and directed.
Form work to beams, lintel bend/beam, shelves rough finish surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete in roof, chajja etc exc 10cm and n.exc 20cm wide complete all as specified and directed.
M&L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in roof beams, cantilevers,lintels etc complete all as specified and directed.
M&L,RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in slabs supported on walls, beams & columns complete all as specified and directed. (reinforcement to be measured separately) and complete all as specified and directed
M&L for Filling Moorum / red bajri in floors, laid in layers n exc 15 cm thickness spread , levelled , rammed inc watering and complete all as specified and directed
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:4) and 25 mm thick PCC(1:2:4)type B0 complete all as specified and as directed.
M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for colours and design wall tiling approved by Enge in charge complete all as specified and as directed
M&L, Preparing new plastered/unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting with ball valves 20mm PTMT complete (min weight 210 gms complete all as specified in SSR Part -I complete all as specified and as directedcomplete all as specified and directed.
M&L Cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate 100mm thick in sub bases of floor/paving and complete all as specified and directed
M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed
M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed.
S&F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.
M&L Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete.
Supply and fixing galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average sidth of aperture 1.40 mm complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed.
S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed.
S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etc complete.
S&F GI tubing of size 20mm dia, medium grade, laid in floors/walls complete all as directred and as speicified
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed
S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
S&F for vitreous china wash basin white flat back size 630x450 mm including brackets,cutting for and pinning in ends of brackets connection to supply and waste pipe fixed in concrete type( B-1 )1:2:4 and complete all as specified and as directed
S & F vitreous China squatting pan ‘Orissa’ pattern, size 580 X 440 mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, lime concrete etc. complete including making good to floor to match with adjoining surfaces all as directed by Engineer-in-Charge.
S&F, Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore complete all as specified and directed.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed
S&F PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.
S&F 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed all as directed
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed.
S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
Supplying, laying, jointing and testing salt glazed stone ware150 mm drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed
Supplying, laying, jointing and testing salt glazed stone ware100 mm drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed
M & L PCC 1:4:8 type D2 using 40mm gd stone aggregate as in bed drain pipes packing under hauching against sides of pipe 100mm dia after they are laid and tested complete all as specified and directed.
M & L PCC 1:4:8 type D2 using 40mm gd stone aggregate as in bed drain pipes packing under hauching against sides of pipe 150mm dia after they are laid and tested complete all as specified and directed.
M&L precast RCC cover slab for manhole1:2:4 type B1 ( using 20mm graded stone aggregate) complete all as specified
M&L for providing PVC wall paneling made out of PVC hollow section of colour as approved of size 225mmx7mm with MS tube grid fix to wall/wood work by means of screws all as per manufacturere instruction, size of MS Square tube grid 1.2mx1.2m etc complete all as specified and as directed.
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 109 above but one fan point controlled by one switch & regulator.
Description same as per item No 109 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description same as per item No 109 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 109 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed.
S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
M&L for fine and clean sand free from sharp materials in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed by Engr–in– Charge. Note:- The total thickness of sand shall be measured 18 cm after punning and punned thickness will be considered for payment.
Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole / cable / foundation etc incl getting out in soft /loose soil complete all as specified and directed.
Supplying and laying PCC Cable cover for cable protection, size 250 x150 x 40 mm, laid flat ie length of cable cover shall be laid across the cable, complete all as specified and directed
M&L in replacement of new generation energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 150 watt colour white complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable flood light any type/any capacity including replacement of twisted 3 core copper cable of size 2.5 Sqmm dia for connecting phase, neutral and earth from junction box to light through connectors all as specified and directed.
Supply and laying galvanised tube light grade ISI marked of size 50 mm dia incl all fittings in trenches/fixed on wall /pole/floor or laid in position complete all as specified and directed.
S&F kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 300x200x125mm, fixed on pole with MS, clamps 30 x 5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. The quoted rate also includes cost for material & repalcement of 3 core copper cable of 1.5 Sqmm ISI marked from junction box to security light length as per required at site Note :- The quoted rate includes cost for excavation of cable for removing cable from loop/demolition of Coping of pole by taking out the cable for connecting in new pole box through aluminium lugs, repair of coping of poles, returing & filling of the cable excavated etc . Make- Sintex/Supreme/Hensal
S&F Voltage stablizer for automatic operation, three phase naturally oil cooled indoor type and design for input variation between 340 V to 460 V with output voltage stablized at 415V with accuracy + 1% and speed of correction 50 volts per second and of capacity 50 KVA complete all as specified and directed by Engr-in- Charge.
S&F in replacement off load changeover switch 4 pole 415 volts 50 hz,side operated 100 Amp in ss enclosure with side handle complete all as specified and directed by Engr-in- Charge.
Supply and fixing in repair 28W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply and inmstall refrigerator electric driven single phase capacity of 195 ltr or nearest higher capacity available, 5 star rated AC, 230 Volts, self defrost timer complete all as specified.
Supply, fixing, connecting and testing automatic voltage stabilizer, wall mounted type, single phase, naturally air colled, indoor type designed for input variation between 170 to 250 Volt and output voltage stabilised at 230 volts with acuracy of (+) 2.5% and capacity 0.5 KVA complete all as specified and directed.
Supply and fix M S body exhaust fans, copper wound, AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed.
Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 16 sqmm 2 core as per IS 7092 Pt-I complete including taking up/down of old unsv UG cable/ACSR conductors all as specified and as directed.
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
S & F regid non-metallic PVC conduit not less than 20 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed
S&F storage type water heater (Geyser), 230 Volt AC, 25 Ltrs capacity 5 star rating comprising glass lined steel inner tank with poly carbonate body suitable heatng element, thermostate with adjustable temperature setting 0-90 C, indication lamps provision for inlet, outlet and air vent connections & NRV, PVC connection 15 mm size, heavy duty with brass nuts, 450 mm long mounted on wall surfaces including all fixing arrangement such as fastener bolts, nuts, washers etc complete including making good disturbed wall surfaces matching with the existing surfaces and finishing all as specified and as directed by Engr-in-charge.
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 4 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
Supply & fix pre wired power unit with 25 Amp MCB and 16 Amp 3 pin plug indicator type for connecting AC with MS terminal boxes not less than 1 mm thick and painted with one coat of red oxide primer all around and 2 coat of black bituminous paint from outside and two coat of alluminium paint from inside suitable for flush mounting conforming to IS 8623-1 and ies 61439-1 complete all as specified and direected.
Supply, fixing, testing and commissioning air conditioner window type, single phase AC 230 Volt, 1.5 ton capacity with a minimum 5 star (BEE) rating including condensor coil and cooling coil blower motor with pvc fan blade and pvc drum suitable for 1.5 tonn window type AC including necessary initial gas charging as required, fixing arrangement , PVC pipe 15 mm dia,Medium grade fixed to wall surface for condensed water outlet, electric connection with PVC insulated unsheathed aluminium conductor twin core cable of size 10 sqmm from electric pole complete all as specified and directed at site. Make : llyod/ HITACHI/ VOLTAS/ bluestarcomplete all as specified and directed.
Supply, Fixing, connecting and testing, automatic voltage stabilizer, wall mounted type, single phase, naturally air cooled, indoor type designed for input variation between 160 to 260 Volt and out put voltage stabilised at 230 Volts with accuracy of (+) 2.5% and capacity 4 KVA complete all as specified ans as directed.
S&F MCB protected power unit include MCB SP 16A to 25 A ,220V,50 Hz Complete all as specified and directed
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, of size 6 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specifief and as directed.
S&F Ceiling fan copper wound, 1200mm sweep, BEE star rating,AC single phase 230 V including all arrangement like hook,pipe of suitable size complete all as specified and directed.
S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 40mm including 40mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.
Supply, fixing, testing and commissioning split type air conditioner with copper tubing, single phase AC 230 Volt, 1.5 ton capacity with a minimum 5 star (BEE) rating including necessary initial gas charging as required, fixing arrangement for outdoor and indoor unit and PCC (1:2:4) mounting platform of required dimensions for outdoor compressor unit, copper tubing of suitable size with insulation to the required length, PVC pipe 15 mm dia, Medium grade fixed to wall surface for condensed water outlet. electric connection with PVC insulated unsheathed aluminium conductor twin core cable of size 10 sqmm from electric pole/panel complete all as specified and directed at site.
Supply and Fixing Deep freezer, single phase AC 230 Volts, 50 Hz (BEE certified) with minimum 5 star rating with sliding glass top, single door having nominal storage capacity of 300 ltrs complete all as specified and directed.
Supply, Fixing, connecting and testing, automatic voltage stabilizer, wall mounted type, single phase, naturally air cooled, indoor type designed for input variation between 170 to 250 Volt and out put voltage stabilised at 230 Volts with accuracy of (+) 2.5% and capacity 3 KVA complete all as specified and directed.
Supply and fix storage type water cooler,electrical driven single phase,230V,50 Hz ,Automatic temprature control,having water storage capacity 120 Ltr and cooling capacity 60 Ltr/hr with copper tubing complete all as specified and directed.
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 2.5 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 4 sqmm cable and one run of 2.5 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
S&F GI pipe medium grade, 15 mm dia bore including all fittings such as bend, tee, elbow, union, reducer etc. fixed complete to wall or laid in floor complete all as specified and as directed .
S&F Gun metal gate valve with iron wheel head screwed both end for iron pipe or for unions and fixed of size 15 mm dia complete all as specified and as directed.
House service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos. 90o bends, M.S. hook and stay or guy complete all as specified and as directed.
M&L brick work with fly ash brick (FASB) confirming to IS 12894 of strength M-10 straight or curved on plan exc 6 m mean radius built motar 1:4 complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as base of water cooler complete all as specified and directed
M&L rendering 15 mm thick in cement mortar 1:6 on surface other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.
S&F a unique LED flood light 30W LED 6500K with IP 65 protection and energy saving , envoirementally friendly long life complete all as specified and as directed.
S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 16 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meters apart including 4mm suspension wire, one twin core cable, flat or circular complete all as specified and as directed.
Supply and fix 3-layer PP-R polypropylene random copolymer pipe of Size 50 mm outer dia, SDR 11 UV stablised and antimicrobial welded having terminal stability for hot and cold water supply including all PP-R plain & brass treaded polypropylene random fitting fixed complete to walls,ceiling or infloor including all fitting such as bend tee,nipple etc complete all as specified and directed
M&L earthing complete with copper earth plate electrode 600mm x 600mmx3.15mm thick,thick burried directly in ground vertically to a depth not less than 3.0 mtr deep below GL with top edge of the plate not less than 2.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt upto 1.5 meter depth all around the earth plate and connected to earth lead of copper strip 20 x 3.15 mm by means of bolts, nuts, check nuts and washers of GI or steel and thimbles and other end of the earth wire connected to DB and protected by galvanized iron or steel pipe light grade 40 mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronge size 75x75x25 mm complete all as specified and directed. Note : 1. RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.2. Charcoal dust and common salt upto 1.5 meter depth shall be filled in layers of 15 centimeters all around the earth plate. 3. On testing after completion of earthing if desired earth resistance is not achieved , the earthing will be redone at no extra cost to obtain the desired earth values. Note:- Earthing test will be carried out and if desired result item not achieved the earthing will be redone to achieve desired result without any extra payment.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
m/s gupta trading
M/S M S Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .