REPAIR/MAINT TO BRICK WORK PLASTERING PLINTH PROTECTION WALL PANELLING INTERLOCKING PATH HARD STANDING AND OTHER CONNECTED WORKS AT BASE HOSP CMDC ECHS SOI SURYA AUDI PUNNIT DUTT AUDI COLLEGE OF NURSING AND OTHER AREA OF AGE EM HOSP UNDER GE EM LKO

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 75 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.

M&L for Brick work in half brick thick wall with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, using bricks of size 230 mm x 110 mm x 75 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified. Note:- Waterproofing compound will be measured and paid separately.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement.

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (first Quality) over one coat of primer over and including 2 mm to 3 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surface of walls and applying two coats 100% Premium acrylic emulsion exterior paint over one coat primer including 1 mm thick exterior grade wall care putty complete all as specified and directed.

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (first Quality) over one coat of red oxide primer complete all as specified.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping holes and applying one coat of synthetic enamel paint (first Quality) complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint (first Quality) (up to 25 mtrs height) complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old plastered or unplaster surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplaster surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of wall / roof projections including facia, cornices etc by scrapping to make surface clean, free from dust, loose paint etc by skilled labour and applying 2 mm thick wall care putty, two coats of oil bound distemper (first Quality) of any tint / shade over one coat primer complete all as specified and directed.

M&L for preparation of old painted surfaces of ceiling by washing, rubbing down & stopping etc, and applying one coat of oil bound distemper (first Quality) of any tint / shade complete all as specified and directed.

Deployment of manpower & tools etc for Complete removal of existing treatment on wall / roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. (Rate included for necessary scaffolding and arrangement for working up to 15 mtrs height).

M&L for applying minimum 1 mm thick exterior grade wall care putty over prepared plastered wall surface to achieve the surface even and smooth for application of painting complete all as specified and directed. Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures.

Material & Labour for applying two coats of 100% Premium acrylic emulsion paint, having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over on putty applied surfaces of walls, primer & paint shall be applied by air less spray machine (Mechanical means) complete all as specified & directed Note:- Rate included for necessary scaffolding and arrangements for working up to 15 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for plain cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops or similar work rounded or chamfered on edges complete all as specified and as directed by Engineer-in-charge.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, as plinth protection / path and the like, finished even and smooth without using extra cement all as specified and as directed.

Dimolition of stone slab / tiles and similar work of any description / thickness in floors, aprons etc laid & bedded dry including removal dry sand screed complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D- 2, using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 60 mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade, in gray cement with approved design & pattern / shape laid as in foot path, / hard standing / drive ways or parking etc., made by table vibratory method using PU mould, laid over and including 20 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Laying & fixing only of inter locking PCC paver block of any descreption, laid as in foot path / hard standing / drive ways or parking etc., laid over and including 20 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. Note:- servicable Interlocking paver blocks retrived from demolition shall be used.

M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 20 mm thick, with grey cement and pigment set & jointed with gray cement slurry and pointed with gray cement & pigment laid over and including 20 mm thick screed bed in CM 1:4 as in floors complete all as specified.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries from site.

M&L for premium / 1st quality non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed in CM 1:6, complete all as specified and directed.

M&L for premium / 1st quality glazed ceramic tiles in vertical surfaces 300 mm x 450 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 10 mm thick screed in CM 1:3, complete all as specified and directed.

M&L for premium / 1st quality vitrified ceramic double chagrged tiles 8-10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for premium / 1st quality full body coloured vitrified parking tiles, exterior grade, for outdoor application of size 600 mm x 600 mm x 15 to 16 mm thick laid with 3 mm wide spacer, grouting the joint with joint filler as per recommendation of manufacturer, laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 18-20 mm thick machine cut Kota stone slab flooring with marble stone strips as per design approved, laid over and including cement screed bed 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed.

M&L for 18-20 mm thick machine cut Kota stone slab as in skirting / riser laid over and including cement screed bed 10 mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed.

Deployment of man power & floor grinding machine for grinding and polishing of existing Kota stone / terrazzo tiles flooring, polished up to mirror finish complete all as specified and directed

M&L for 18 to 20 mm thick granite (of any type) tiles machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 15 mm thick in cement mortor 1:6 complete all as specified and directed.

Material and labour 1st quality vitrified outdoor, parking tiles of approved shade, of size 300 mm x 300 mm x 9-10 mm thick as in floors / path etc, set & jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Refixing of old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down).

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from taking down).

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete

Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, suitable for 20 mm bore pipe, screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

Disconnecting existing tank of capacity 500 ltrs, setting aside or lowering if required and reconnecting or refixing in same positing or other position, including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc complete all as specified .

Disconnecting existing tank of capacity 1000 ltrs, setting aside or lowering if required and reconnecting or refixing in same positing or other position, including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc complete all as specified .

S&F in repairs 15 mm size Bib taps, cast iron with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm size PTMT( Polytetra Methyllene Terephthalate) Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified and directed.

S&F in repairs 15 mm size bib tap, cast copper alloy chromium plated, fancy type with capston head, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs 15 mm size long body bib tap, cast copper alloy chromium plated, fancy type with capston head, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs 15 mm size long body elbow operated bib tap, with wall flange, long body, cast copper alloy chromium plated, fancy type, screwed for 15 mm bore iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repair 15 mm size Concealed stop cock, cast copper alloy, chromium plated, Reduced body, screwed down, high pressure, with capston head, screwed externally both ends for unions etc. and fixed complete all as specified.

S&F in repair 15 mm size Angle cock / valve, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S&F in repair 15 mm size two way Angle cock / valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes complete.

S&F in repair 15 mm size two way bib cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15 mm size pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm size swan neck pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm size elbow operated pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm size basin mixer cast copper alloy chromium plated with capstan heads, half turn type, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe with 450 mm braided connection pipe complete all as specified.

S&F in repairs Brass chromium plated shower rose 80 mm size without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repair for brass chromium plated toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs mild steel chromium plated gratings suitable for 75 / 100 mm dia NT/ FT complete all as specified and directed.

S&F in repair brass Chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified.

S&F in repair white vitreous China wash down water closet pan (padestal pattern), fixed in position with fixing bolts, connection to drain pipe and to flushing pipe, etc., complete.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

S&F in repair PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete complete all as specified.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nut, length 450 mm complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nut, length 600 mm complete all as specified and directed.

S&F in repair white vitreous China bowl urinal flat back, of size 465 x 355 x 265 mm ( minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe, and waste pipe) including connections to flushing pipe and outgoing, complete all as specified and directed.

S&F in repair white vitreous China urinal flat back, half stall (Large size) with grating and union for discharge pipe (excluding flushing cistern, flush pipe, and waste pipe, fixed in repairs including connections to flushing pipe and outgoing, complete all as specified and directed.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete, 32 mm size brass chromium plated waste coupling, complete.

S&F in repair 32 mm size flexible pipe of PVC fixed to WHB / urinals as waste pipe (not less than 600 mm long) including PVC coupling complete all as specified and directed.

S&F in repair 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M&L for taking down glass / ACP panel & neosprene rubber beading from aluminium joinery & supply & fix new neosprene rubber beading with old glass / ACP panel completeall as specified & directed.

S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass.

M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.

M&L for Repairing of existing toughened glass door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.

Supply & fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed, complete all as specified and directed.

S&F in repairs Aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed.

S&F in repair 100 mm size mild steel mortice lock, for aluminium door, with 4 brass levers and duplicate key complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A).

Dismantling of roof sheet (any descriptions) including ridges in roof covering complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of existing roof treatment of any type, including screed bed etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and as directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 over RCC roof slab including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. (WPC will be measured and paid separately)

M&L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg / sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm. (b) Supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyester matt laid using bitumen torch by torch application with a side lap of 10 cm & 15 cm end lap weighing not less than 3.5 kg / sqm. Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete / in patches in roofs (ii) Contractor shall submit written guarantee of 10 years from date of completion & submit security deposit @ 2.5% of executed amount or Rs 6250.00 which ever is more.

M&L for preparation of untreated surface of APP membrane of any description over 10 cm in width or girth, not otherwise described and applying two coat of aluminium paints over one coat primer complete all as specified and directed.

M&L for preparation of new cement mortar screed bed roof surface, providing water proofing treatment by applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflectivity Index (SRI) of 105, in three coats (@10.76 litre / 10 sqm), first coat with self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1), second & third coats with undiluted elastomeric waterproofing liquid (dry film thickness of complete application / system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge- Make: Asian Paint, Sikka, Dr Fixit, Berger.

Note: - (i) Work to be carried out through authorised applicators of the manufactures and work will be carried out in complete roof / in patches in roofs (ii) Contractor shall submit written guarantee of 10 (ten) years from date of completion & submit security deposit @ 2.5% of executed amount or Rs 6250.00 which ever is more. (iii) Screed bed will be measured & paid seperatly.

Note For Item No 99 & 101 WPT INFORMATION PLAQUE. All buildings where water proofing treatment carried out shall be provided with “WPT Information plaque” of adequate size on wall of building. “WPT Information plaque” shall be of provided with base coat with 2 coat white synthetic enamel paint over one coat primer. Following information shall be mention with 2 cm height letter, numbers painted with black synthetic enamel paint all as directed by the Engineer-in-Charge. Quoted rate by the contractor against water proofing items shall be deemed to include cost of said “WPT Information plaque” 1. CA No --------------------------------- 2. Name of Contractor ---------------------- 3. Date of completion of work --------------- 4. Date of Expiry of waterproofing treatment ----------- 5. Name of Sub division -----------

S&F false ceiling of E-board of size 600 x 600 x 4 mm thick, white prelaminated seif embossed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) including dismantling of existing ceiling, complete all as specified directed by the Engineer-in-Charge

M&L for Super heavy series PVC Wall panelling consisting of 5-8 mm thick Plain / wood colour PVC sheet of approved coloured & pattern, fixed on walls as per manufactures instruction including dismantling of existing panelling complete all as specified & directed.

S&F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M R CONSTRUCTION (BID ID -3466006)

AJAY CONSTRUCTION (BID ID -3459869)

M/S ANIL ARORA (BID ID -3459575)

m/s pal associates (BID ID -3465736)