85203 SPECIAL REPAIRS TO P- 93 AT E and ITI JALAHALLI BANGALORE

Amount

B/R WORKS :- Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and Labour for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under floor Brushbond Roof guard treatment) with WPC all as specified and directed. Note: WPC shall be measured and paid separately.

Providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Brushbond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties: Solid Content : 70 % ,Tensile strength (ASTM D 412) : 1.10 MPa ,Elongation (ASTM D12): 100 % ,Resistance to ageing due to UV radiation: 1000 hours No change , Rapid Chloride Penetration : Very low Resistance to Algae growth: Passes, Zero Rating/ Permeability (mm) : 5.0 , Water vapour transmission: 6.0 g/ m² h ,No. of coats : 3 (minimum) ,Adhesive bond strength : > 0.92 N/mm2 . Make : FOSROC

Material and Labour for Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work all as specified and directed.

Material and Labour for 75mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate and finishing the surfaces even and smooth without using extra cement all as specified and directed.

Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key,scrubbing down with water all as specified and directed.

Material and Labour for Rendering 15mm thick in CM (1:4) (5mm with WPC over 10mm thick in two layers) on external surfaces of walls mixed with water proofing compound on stone masonry/concrete surface or brickwalls finished even & smooth without using extra cement all as specified and directed. Note : WPC shall be measured & paid seperately .

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primercomplete all as specified and directed.

Material and Labour for 5 mm thick rendering on fair faces of concrete surfaces on ceiling in CM 1:3 and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of plastered surfaces of ceiling and applying three coats of white wash on new surfaces complete all as specified and directed.

Material and Labour for Rendering 15mm thick in CM (1:3) on sunken, concrete floor , mixed with integral water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately

Material and Labour for Applying bitumen blown 85/25 grade, applied hot, to concrete surfaces at the rate of 1.2kg per sqm per coat complete all as specified and directed.

Supply and fixing APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application complete all as specified and directed.

Material and Labour for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for 25mm thk PCC 1:2:4 type B0 using 12.5 mm graded aggregate as wearing coat for laying floor finishes, finished fair to receive tiles complete all as specified and as directed.

Material and Labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor complete all as specified and directed.

Material and Labour for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and Labour for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles/skirting/dado etc. complete all as specified and directed.

Material and Labour for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Material and Labour for reinforced cement concrete (1:2:4)typeB-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even complete all as specified and directed.

Material and Labour for form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with flat finished surface of concrete complete all as specified and directed.

TMT bar10mm dia TMT & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT bars 8mm dia in stirrups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and Labour for pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 18 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding washer facing dressed stone work and precast concrete articles complete all as specified and directed.

Material and Labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Material and Labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately under relevant items of this schedule).

Material and Labour for rendering 15 mm thick in CM 1:6 on fair faces of brick work/stone masonry finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of New plastered surfaces of wall and applying three coat of white wash on walls complete all as specified and directed.

Material and Labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls complete all as specified and directed.

Material and Labour for preparation of plastered surfaces of ceiling and applying one coat of white wash on Ceiling on old surfaces complete all as specified and directed.

Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames)complete all as specified and directed.

All as per item 38 above but exceeding 1.5Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Supply &Fix solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as per drawing and all as specified and directed.

Supply &Fix factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed.

Resecuring or easing and adjusting wooden shutters of any description area n.exc. 1 Sqm each without taking down complete all as specified and directed.

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down complete all as specified and directed.

Supply &Fix 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & Fixing 125 mm Aluminium handles, cast type, anodised complete all as specified and directed.

Supply &Fix 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Supply &Fix Butt hinges, medium weight cold rolled mild steel and fixed 100 mm size complete all as specified and directed.

Supply &Fix in repair 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & Fixing in repair 125 mm Aluminium handles, cast type, anodised complete all as specified and directed.

Supply &Fix in repairs Butt hinges, medium weight cold rolled mild steel and fixed 100 mm size complete all as specified and directed.

Supply &Fix steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

Supply &Fix 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Material and Labour for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc complete conforming to Fe 290.Gde -E-165 complete all as specified and directed.

Cutting holes in Stone walls built in cement mortar exc one brick but not exc two brick thick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 Including painting touch up as required complete all as specified and directed.

Material and Labour for providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth,not otherwise described and all as specified and directed.

Supply and fix in repairs vitreous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed

Supply &Fix 25mm dia chromium plated cast copper alloy flush cock, screwed down, screwed for pipe complete all as specified and directed.

Supply &Fix in repair sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as directed and specified

Supply and fix in repairs waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms complete all as specified and as directed.

Supply &Fix in repairs low density polyethylene pipe of pressure rating 6 kgf/sq cm for WHB/sink of 32/40 mm bore complete all as specified and directed.

Supply &Fix in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

Supply &Fix in repairs 5.50mm thick looking mirror of selcected quality glass mounted on 12mm thick BWR phenol bonded ply back with PVC beading allround frame fixed to wooden plug with chromium plated brass screw & cup washer complete all as specified and as directed

Supply &Fix in repair fancy type brass chromium plated shower rose 125 mm size with arm complete all as specified and directed.

Supply &Fix brass chromium plated towel rail 20mm dia D type 60 cm long complete all as specified and directed.

Supply &Fix in repair CP soap dish fixed with screw to wall complete all as specified and directed.

Supply &Fix 15mm bore stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed complete all as specified and directed.

Supply &Fix 15mm bore stop valves fancy type chromium palted with long shank and cup (concealed type ) screwed for iron pipe complete all as specified and directed.

Supply &Fix 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed.

Supply and fix vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Supply &Fix Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms) complete all as specified and directed.

Hacking out old broken glass panes from wooden framed shutters including. Putty/wooden beadings and supply and fix frosted glass ordinary quality 4 mm thick, in squares n.exc. 0.5 sqm in each pane including necessary oil putty/wooden beads complete all as specified and directed.

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia complete all as specified and directed.

All as per item No 72 hereinbefore but 20mm dia complete all as specified and directed.

All as per item No 72 hereinbefore but 25mm diacomplete all as specified and directed.

All as per item No 72 hereinbefore but 40/50mm dia complete all as specified and directed.

Supply and fix in repairs 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified and directed.

All as per item No 76 hereinbefore but 20mm dia complete all as specified and directed.

Supply and fix in repairs 25mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified and directed.

Supply and fix in repairs 40mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified and directed.

Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia (Note: Serviceable pipes & fiitings obtained from item 72 to be re-used)

All as per item No 80 hereinbefore but 20mm dia complete all as specified and directed.

All as per item No 80 hereinbefore but 40mm dia complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick/stone walls complete all as specified and directed.

Supply and fix in repairs PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

Supply and fix Rotational moulded Polyethylene water storage tank - 2000 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I.

Supply and fix in repairs 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe complete all as specified and directed.

S & F in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe complete all as specified and directed.

Supply and fix in repairs 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix in repairs 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

All as per item No 90 above but 75mm dia complete all as specified and directed.

Supply and fix PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed.

All as per item No.92 above but bore of pipe 110 mm with access door complete all as specified and directed.

Supply and fix PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and directed.

Supply and fixPVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75mm complete all as specified and directed.

Supply and fix PVC (SWR) branch piece, single(single Y) equal or unequal with access door bore of pipe 75mm complete all as specified and directed.

Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal with access door bore of pipe 110mm complete all as specified and directed.

Supply and fix PVC (SWR) branch piece, double (double Y) equal or unequal with access door bore of pipe 110mm complete all as specified and directed.

Supply and fix PVC (SWR) WC connector bent pipe/reducers 110 mm complete all as specified and directed.

Supply and fix PVC (SWR) Vent cowl 110mm complete all as specified and directed.

Hardcore of gauge n exc. 63 mm of broken stone or boulders deposited, spread and levelled in layers n exc.15 cm thick,watered and rammed to a true surface complete all as specified and directed.

Material and Labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates complete finished fair and even complete all as specified and directed.

Raking out joints / pointing to squared rubble masonry coursed or uncoursed built in cement mortar or cement lime mortar complete all as specified and directed.

Keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4 complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B1 using 20 mm graded agg as in flooring levelling concrete 25mm thick complete all as specified and directed.

Material and Labour for 20 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Material and Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and Labour for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and Labour for cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

Material and Labour for removing existing water proofing treatment on roof, clean with water and wire brush and applying oil bound primer @ 0.20 kg/Sqm and providing APP modified water proofing membrane weighing not less than 4Kg/Sqm reinforced with min160 gram/Sqm non woven polyster mat and a coat of hot blown bitumen of 85/25 or 95/15 @ 1.20 Kg/Sqm applied on the top of Polymeric membrane and finally finished with a coat of solar reflective bituminous aluminium paint @ of 100 grams/Sqm all specified and directed and testing complete on completion.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at jointscomplete all as specified and directed.

Supply & fixing factory made, 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply & fixing Mild steel powder coated pelmet rods 25 mm dia including 02 Nos of brackets, 02 Nos of finials or side brackets as per site requirement and 10 No of curtain rings in each curtain rod complete all as specified and as directed

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 4 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete all as specified and directed.

Supply & fixing in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm. & fixed with wooden beads / stainless steel wire stapels and all as specified and directed.

Supply & fixing in repairs 140mm overall length of cover plate Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified.

Material and Labour for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primeron walls complete all as specified and directed.

Material and Labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of cement based paint(Apex) on walls as specified and directed.

Material and Labour for powder coated aluminium sliding window frame shutter with 6mm thick frosted glass louvers with frame, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. and including fixing of glass complete all as specified and directed. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials all as specified and directed.

E/M WORKS:- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for considering under credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specied and directed .

Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including medium grade PVC conduit of size not less than 20mm on surface of wall including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator etc fixed flush in wall complete including earth continuity conductor of PVC insulated, unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm for the following all as specified and directed (Note : Cost for cutting chases for fixing of steel terminal box and making good to disturbed surface all as to match with existing surface are deemed to be included in the quoted rate.

One light point controlled by , one way switch 5 Amps .

One ceiling fan point controlled by one switch one way 5 Amps.

One exhaust fan point controlled by one, one way switch 5 Amps.

One light point controlled by two, 2 way switches 5 Amps.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 2/3 pin switch socket combination 5 Amps on independent board.

All as per srl item No 175 here- in- before but for but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm.

Supply and fix switch piano flush type single pole one way 5 Amp 240 V all as specified and as directed .

Supply and fix switch piano flush type single pole two way 5 Amp 240 V all as specified and as directed .

Supply and Fix socket outlet 2 in 1 ,5 Amps ,flush type all as specified and as directed .

Supply and Fix switch socket combination 2 in 1, 5 Amps ,flush type all as specified and as directed .

Supply and Fix socket combination multipurpose ,5/16 Amps , 5 in 1,flush type all as specified and as directed .

Supply and Fix ceiling rose surface backelite three terminals 65x50mm, 240 volts complete all as specified and as directed .

Supply and Fix ceiling fan regulator electronic socket type 100 to 180 Watt surface step type complete all as specified and as directed .

Supply and Fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack of 20 Watt complete including 2 Nos PVC round block and necessary connection from ceiling rose to fitting with 3 core flexible copper cable of 0.5 Sqmm size complete all as directed. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.172 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix Energy saving and environmental friendly long life LED building security light fitting of 30 Watt made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having TOP opening, seperate driver compartment with IP66 protection and impact resistance of IK07 including GI pipe Bracket of suitable size with all necessary fixing arrangment on building NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.172 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Taking down carefully unserviceable main switches/DB's from their position and removing materials from site all as specified and as directed .

Supply and Fix sheet metal enclosure vertical distribution box TPN 8 way, 415 volts with 200 Amps rated bus bar double door type suitable for 4 pole MCCB 100 Amps as incomer and MCBs as out goings, complete including connecting up and making good distrubed surface all as specified and as directed.

Supply and Fix sheet metal enclosure distribution box suitable for MCBs 4 way, TPN 415 volts with 200 Amps rated bus bar double door complete including connecting up and making good distrubed surface all as specified and as directed.

Supply and Fix sheet metal enclosure distribution box suitable for MCB'S 8 way, SPN 240 volts with 200 Amps rated bus bar double door complete including connecting up and making good distrubed surface all as specified and as directed.

Supply and Fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps all as specified and as directed.

Supply and fix MCCB 100 Amps 4 pole 25 KA 415 volt complete all as specified and as directed .

Supply and fix MCB TPN, 415 volts 40 to 63 Amps, 10 KA rupturing capacity, C series all as specified and as directed .

Supply and fix MCB TP, 415 volts 32 Amps, 10 KA rupturing capacity, C series all as specified and as directed .

Supply and fix in repair MCB SPN, 240 volts 5 to 32 Amps, 10 KA rupturing capacity, C series all as specified and as directed .

Supply and fix in repairs MCB SP, 240 volts 5 to 32 Amps, 10 KA rupturing capacity, C series all as specified and as directed .

Taking down sub main wiring of any size and making good the disturbed surfaces complete all as specified and directed.

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 4 sq mm cable and one run of4 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit .

Sub main wiring with four single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 6 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Four runs of 6 sq mm cable and one run of 6 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit .

Sub main wiring with four single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 10 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 10 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Four runs of 10 sq mm cable and one run of 10 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit .

Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

S CHANDRASHEKAR (SREE BUILDERS)

PATEL CONSTRUCTION

shashi shekar construction

VARGHESECHACKO AND CO

SRI LAKSHMI CONSTRUCTIONS