REPAIR MAINT OF JOINERY TILING PLUMBING AND OTHER CONNECTED BR WORKS IN YOS ACCN VVIP GUEST ROOMS YOS MESSES AUDITORIUM MUSEUM DSOI QM AND OTHER AREA OF INFANTRY SCHOOL UNDER AGE BR II OF GE MIS MHOW

Amount

Taking down shuters of any description nexc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F for galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S & F in repair galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden frame or steel etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .

S&F in repairs 200 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified and as directed.

S&F in repair fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F in repair aluminium coloured power coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

S&F in repair aluminium coloured power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

S&F in repair prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

S&F in repair 25 mm dia mild steel chromium plated drappery curtain rod with fixing bracket complete all as specified and directed .

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

Labour only brick work with sub class 'B' modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 in any position complete all as specified and as directed. NOTE:- Servicable bricks obtained from demolition shall be used.

M&L for brick work in CM ( 1:6 ) with using sub class `B ` modular brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM ( 1:6 ) on fair faces of wall/ concrete surfaces finish even and fair complete all as specified and directed.

M & L for applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under Srl Item No. 38)

M & L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 litre/10 sqm) over over a coat of primer @ (2.20 kg/10 sqm) of same make all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coat of 1st quality oil emulsion distemper white/coloured over a coat of cement base white wall care based putty (where it is required in Patches) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately under Srl Item No. 39)

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of 1st quality oil emulsion distemper all as specified and directed.

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer of same make and white cement based putty (where it is required in patches) all as specified and directed. NOTE- Putty shall be measured and paid seperately under Srl Item No. 39).

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer of same make and white cement based putty (where it is required in patches) all as specified and directed. NOTE- Putty shall be measured and paid seperately under Srl Item No. 39).

M&L for preparation of newly plaster surface of wall and and apply 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth complete all as specified and directed

M&L for complete removal of existing treatment of wall(any no. of layers) and apply 2mm thick white cement base wall care putty in two coats (each coat not less than 1mm) over a coat of cement base primer on walls and surface finished even and smooth complete all as specified and directed

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for PCC1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed

M & L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for PCC 1 : 1.5 : 3 type A0 using 12.5mm graded stone aggregate for correcting of slope with average thickness 50mm in sunken floor slab mixed with liquid water proofing compound Dr Fixit LW+ @ 200ml/bag of cement as per manufacture instruction and concrete surfaces finished even & smooth without using extra cement all as specified and directed. (Note : Liquid water proofing compound shall be measured and paid saperately under relevant item).

M&L for rendering 15 mm thick cement plaster on fair faces of concrete surfaces in CM (1:3) mixed with liquid water proofing compound Dr Fixit LW+ @ 200ml/bag of cement as per manufacture instruction and surface finished even & smooth without using extra cement as in sunken floor and vertical surfaces of RCC slab ,complete all as specified and directed . (Note :Liquid water proofing compound shall be measured and paid saperately under relevent item).

M&L for applying water proofing chemical treatment to sunken floor and vertical surfaces of RCC slab by applying a base coat of Dr FIXIT Fast Flex chemical in thickness not less than 1 to 1.5 mm or other equivalent make as approved by GE

M&L for plain cement concrete 1:5:10, type E2 using 40mm graded brick aggregate as in filling of sunken portion complete all as specified and directed.

M&L for preparation of old plaster of external wall surfaces and providing water proofing treatment by applying one base coat of Raincoat White (Dr FIXIT) over a coat of Prime Seal primer (Dr FIXIT) including plastering if required at site and making the surface fit for application of exterior waether proof water base emulsion paint complete all as directed and specified.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish of the primeses complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per item No 51 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size not less than 300x250x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for machine cut kota stone slab 20-25mm thick as in flooring laid over and including 15mm thick screed bed in CM 1:6 and cement mixed with pigment to match the shade of slab including rubbing and laid over and including polishing complete all as specified and as directed.

Rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed.

M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including polishing the granite surface by using mechanical grinder and moulding edges complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) rubber moulded of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.

M&L for stone dust as in levelling course of interlocking paver block complete all as specified and directed.

M & L for providing precast cement concrete louvers and jallies 50mm thick (measured solid), type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar (1:4) including all moldings but excluding frame complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity (cylindrical vertical with closed top) of two layered hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.

All as per item No 64 above but capacity of 1000 litre complete all as specified and directed

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. .Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes comlete all as directed..Make-Plumber/Essco of jaguar(Economical Range)

S& F in repair CP toilet paper holder complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .)

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. .Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair health faucet with flexible pipe of one meter length including wall hook for EWC complete all as specified and as directed..Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

S & F in repairs vitreous china wash basin white (oval shaped under counter) of size not less than 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed .

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified and as directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets complete all as specified and directed.

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F mild steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified and as directed

Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

S & F coloured powder coated aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified.

M&L in repair for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC 1:2:4, type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:1 and making good the dismantled portion in PCC 1:2:4, type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed.

M&L for RCC 1:2:4 type B1using 20mm graded stone aggregate as in kitchen shelves , manhole cover, etc including dismantling of existing RCC work complete all as specified and directed.

M&L for form work to suspended slab as in kitchen shelves etc.complete all as specified and as directed

M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

S&F PVC prelam sheet paneling in Wall/Ceiling of thickness 5mm consisting of panels having size 1.22 M x 2.44 M stuck on inner frame work of 50 mm wide strips of 5mm thick prelam PVC sheet of 600 Kg/cbm density manufactured by an ISO-9000 certified company. The PVC strip shall be fixed to the wall/Ceiling using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm.The exact size of the panel and correspondingly of grid may vary depending on the size of wall/Ceiling complete all as specified and as directed

S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed

M&L for in repair washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement; 4 coarse sand) following the under layer with scatching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scubbing and washing, the top layer with brushes and water to expose the stone chippings including scaffolding & height upto 25 mtr complete all as specified and as directed.

S&F 4 mm thick aluminium composite panel sheet Exterior Grade on wall cladding etc,including taking off Stone Cladding work if required) including Aluminium structure require to fix the sheets which is first fixed on the sub-structure upto height 12m with all necessary packing and fixing arrangements etc including necessary scaffolding arrangment complete all as specified and directed at site by Engr-in-charge.Note- Colour and Texture of ACP Sheet shall as approved by Engr-in-Charge.

S&F 6 mm thick High Pressure Laminate Sheet sheet Exterior Grade on wall cladding etc,including taking off Stone Cladding work if required) including Aluminium structure require to fix the sheets which is first fixed on the sub-structure upto Height 12m with all necessary packing and fixing arrangements etc including necessary scaffolding arrangment complete all as specified and directed at site by Engr-in-charge.Note- Colour and Texture of ACP Sheet shall as approved by Engr-in-Charge.

S&F in repair 20-25mm Granite/Stone Cladding (of any type) work(table rubbed and polished) Pillars/Walls upto height 12M and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite including grinding and polishing including necessary scaffolding arrangment complete all as specified and as directed. Note:-Colour,shade and pattern of granite shall be approved by Engr in charge.

S&F 10-15mm thick Polycarbonate sheet in dome structure/similar condition with rubber neoprene/similar packing material fixed and packed with sheet including dismantling of existing sheeting complete all as specified and as directed.

Taking down Urinal/Urinal Sensor machine, repair its parts as like battery,sensor part,wiring etc and including all repair machine,change repair parts etc,and refixing the Urinal/Urinal sensor in the same place complete all as specified and directed at site by Engr-in-charge. Make of parts :- Jaquar,CERA,Hindware and Parryware only.

Goyal Construction