Construction of Two Class Room School Building at PUES in Dhamaraipakkam H/O Dhamaraipakkam Panchayat

Amount

Construction of Two Class Room School Building at PUES in Dhamaraipakkam H/O Dhamaraipakkam Panchayat

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Supply and filling with Basement M Sand including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

Collection and supply of gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum.

CC 1:2:4 mix using 20mm HBG metal including cost and conveyance and all labour charges and materials charges etc,..

Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Below Base

Above Base

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Column Below GL

Column Above GL

Lintel,Roof slab,Sunshade

Core wall

Brick work in cement mortar 1:5 mix using country bricks 83/4"x43/8"x23/4" including cost and conveyance etc complete and all labour charges

Below Basement

Above Basement

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by

Paver block Wmm

Cement concrete 1:3:6 mix using 20mm ISS metal including cost andconveyance of all materials to sitlaying and curing etc complete for bed blocks for 10 cume and all labour charges for mixing,

Core wall

Providing and Laying of Interlocking Concrete (Surface Textured) Block Pavements having thickness 60mm and compacted over a thin bedding sand layer of 25 mm thickness and joints shall be filled by fine sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504.

Paver block

Providing and constructing 110mm thick (Plus or minus 5mm) brick masonry in cement mortar 1:3 for partition walls using well burnt best quality bricks including supplying and laying 1 No 6mm dia MS bars at every fourth layer including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge.

FLOOR

In Ground Floor

Manufacturing, supplying and fixing of Steel doors with following specification 1.20 X 2.40 m

Manufacturing, supplying and fixing of Steel Windows with following specification 1.20 X 1.60 m

Finishing Top of Roof with Paving the Floor with scratch proof ceramic tiles (Cooling Tiles) of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs

Floor finishing with granolithic CC 1:2:4 thickness of 25 mm including cost and conveyance of all labour charges

Supplying and Painting the walls with single coat of JSW wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work)

Colour washing two coats with approved plastic emulsion paint inlcuding cost and conveyance and all labour charges etc,..completed..

Colour washing two coats with approved Distember paint inlcuding cost and conveyance and all labour charges etc,..completed..

Painting with two coats over new iron work using synthetic enamel paint including all

Supply and fixing of cuddapah slab to cubboards including all labour charges etc complete

Supply and fixing SS Hand Rail for step etc complete

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary

Electrification

Provision for Light point SD.25

Provision for Fan point SD.25

Supply and fixing of 48" ceiling fan SD.106

Provision for Plug point SD.38

Supply and fixing of Tube light Fitting SD 88

Supply and fixing of Bulk head fitting SD.83

Provision for Name Board

Provision for Photo charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

KBJ CONSTRUCTION (BID ID -1228812)