PROVN OF FLAG POST, GRANITE PLATFORM, DRAIN COVER OVER EXISTING DRAINS, WASHBASIN CABINET DOOR, ROAD SIDE KERB STONE, ALUMINIUM PARTITION WORK AND ORGANISATION SIGN BOARD AT A CELL DIPAS

Amount

Contract Details

Surface excavation exc (not exc) 30 cm deep in Hard rock/dense soil as specified.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base as specified .

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm each as specified.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point as specified .

M&L brick work with fly ash bricks straight or curved on plan exc. 6 mtr mean radius built in CM (1:6) as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in flooring surface finished even and smooth without using extra cement all as specified & directed.

M&L for Steel work in tubular trusses/ post including special shaped washer MS plate Hooks Pully ,Socket cap MS bolt etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 as specified.

M&L for preparation of new steel and iron surfaces with any description not otherwise described, over 10cm width or girth and applying two coat of Synthetic enamel over a coat of red oxide zink chrome complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed.

M&L for 20mm granite work as on any platform staircase (table rounded and polished) in steps, jambs, pillars, window cills, coocking plateform, Chabutra and like in cement mortar (1:4) inc pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as spd and directed by engg-in-charge

M&L for 20mm granite work as Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, Chabutra and like in cement mortar (1:4) inc pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as spd and directed by engg-in-charge.

M&L for Framed work such as grills, gratings, and Iron jali of specified size etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors including hinges and handles as needed framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work like drain cover conforming to Fe.290.Gde-E-165 as specified and directed.

M&L for preparation of new steel and iron surfaces with any description not otherwise described, over 10cm width or girth and applying two coat of Synthetic enamel over a coat of red oxide zink chrome complete all as specified and directed.

Surface excavation exc (not exc) 30 cm deep in Hard rock/dense soil as specifed and directed

M&L for 150 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base as specifed and directed.

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm each as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point as specified and directed.

Pre-cast cement concrete type B-1 (1:2:4) 20 mm aggregate for Kerb stone , exc. 10 cm in width and setting in mortar (1:4), complete as specified and directed.

M&L for preparation of new surfaces of any description of concrete over 10cm girth or width, and applying one coat of priming paint and two coat of synthetic enamel paint as specified and directed.

M&L for powdered Coated (minimum thickness of power coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, aluminium flats & aluminium grill inc all fitting assecory required as per site condition, with one or more rebates includng joining cleats for fixing etc . Complete all as specifed and directed by engg-in -charge.

M&L for powdered Coated (minimum thickness of power coating 50 micron) Anodised aluminium door shutter, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specifed and directed by engg-in-charge.

S&F prelaminated 12mm particle board, interior grade prelaminated one side with decorative choice lamination & other side blancing white lamination fixed with any sutiable any means to aluminium framing/doors/ windows etc as direced and specified.

M&L for Powder coated (any colour) aluminium frame for doors, windows, ventilators, aluminium flats & aluminium grill inc all fitting assecory required as per site condition, with one or more rebates includng joining with cleats or by other means as per requirement for fixing to wall roof and floor etc complete all as specifed and directed by engg-in -charge.

M&L for powder coating (any colour) aluminium door shutter, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screw tower bolts etc. complete all as specifed and directed by engg-in-charge.

S&F 4.8 mm thick sheet glass fixed on aluminium door/frame/windows in square exc 0.50 sqm each pane, all as specified and directed by engg-in-charge.

S&F of Mortice lock, vertical type, aluminium, anodised body size 100 mm 2 livers as directed by engineer in charge.

M&Lfor coloured glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

M&Lfor coloured glazed ceramic tiles in floor surface 200X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

M&L for ACP 3D SIGN Board of Defence institute of bio-energy research with logo of 2.5'*2.5' and trasportation, MS Pipe 1*1 with primer coated 5kg length 18 gauge both side angles 10 inches each ACP sheet 3mm (Indo Bond) with Screw 3mm Acrylic letters with led lights ISO Certified Brand,3mm channel Raising sunboard with power supply 400watt wire 1.5MM as specified and directed.

om enterprises (BID ID -3376901)

M/s J P Traders (BID ID -3377560)

M/S M K CONSTRUCTION (BID ID -3379510)