REPAIR, RECANNING AND PAINTING TO STEEL CHAIRS AND CERTAIN STEEL FURNITURE AT GE (A) SURATGARH

Amount

Taking out carefully following old unserviceable parts of ALMIRAH LARGE STEEL WITH SHELVES and M & L for replacing with new parts as per existing or as per drawing :- FD-1031

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover.

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel

Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with of two coat of synthetic enamel paint .

M& L for replacement of hinges 75mm long

M & L for denting & painting Almirah both internally and externally with two coat synthetic enameled paint of BLACK / OG/ Silver Gery colour over a coat of zinc chrome red oxide primer as directed by Engr-in-Charge with spray gun / brush after properly smoothening the surface with the help of an electric grinder,applying putty on dents complete all as specified and directed by Engineer-in-Charge.

Taking out carefully following old unserviceable parts of ALMIRAH LARGE STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD/E6/MAP/18

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover.

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel

Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with two coat of synthetic enamel paint .

M& L for replacement of Hinges 75mm long

M & L for denting & painting Almirah both internally and externally with two coat synthetic enamelled paint of BLACK / OG/ Silver Gery colour over a coat of zinc chrome red oxide primer as directed by Engr-in-Charge with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents complete all as specified and directed by Engineer-in-Charge.

Taking out carefully following old unserviceable parts of ALMIRAH MEDIUM STEEL WITH SHELVES and M & L for replacing with new parts as per existing or as per drawing :- FD-1032

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK) with duplicate key & hole cover.

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F 3 way locking system made out of 10mm dia mild steel rod to almirah large steel

Legs of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint .

M& L for replacement of Hinges 75mm long for fixing the existing shutter of Almirah Med

M & L for denting & painting Almirah both internally and externally with two coat synthetic enamelled paint of BLACK / OG/ Silver Gery colour as directed by Engr-in-Charge with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Taking out carefully following old unserviceable parts of BOOK CASE STEEL GLAZED and M & L for replacing with new parts as per existing or as per drawing :- FD-1028

Removing unsv & S & F shelves & shutters with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK),with duplicate key.

Removing unsv & S & F steel anodized handles as per sample.

Removing unsv & S & F 3mm thick glass of the shutters and smoothening the movement thereof.

M & L for denting & painting Almirah both internally and externally with two coat synthetic enamelled paint of GREY/OG colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Taking out carefully following old unserviceable parts of LOCKER BEDSIDE STEEL and M & L for replacing with new parts as per existing or as per drawing :- :FD-257, FD-1029

M & L for Denting & painting of locker with two coat synthetic enamelled paint of BLACK/OG/Silver GRey as directed by Engr-in-Charge colour after preperation of surface by cleaning & smoothening with electric grinder & applying putty/primer where necessary complete all as specified/shown on drg & directed by Engr-in-Charge.

Removing unsv & S & F hasp & staples 75mm long as per drg.

Removing unsv & S & F MS steel CP handles 100mm long as per drg.

S & F CP steel conduit 19/20mm dia hanging rod with brackets16 guage as per drg.

Removing unsv & S & F shelves all as per drg.

Removing of unsv & S&F of Legs made out of 1.00 mm thick PBI sheet including painting with of synthetic enamel paint

M& L for replacement of Hinges 75mm long for fixing the existing shutter of Locker Steel

Taking out carefully following old unserviceable parts of CHAIR VERANDAH and M & L for replacing with new parts as per existing or as per drawing :- FD-333,256,

Removing unsv & M & L for recanning the chair with plastic cane 3.5mm to 4mm wide, 0.4 mm thick half round, white colour, (MAT Pattern),(GAREWARE/MPI/SHAH/PREMIER) complete all as specified & directed.Canning shall be done only after painting.

M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality after scrapping off the existing worn out paint with an electric grinder and required welding work (if any) complete all as specified & directed.

Removing unsv & Supply and Fixing PVC shoes .

Taking out carefully following old unserviceable parts of CHAIR VERANDAH PVC SEAT & BACK and M & L for replacing with new parts as per existing or as per drawing :-: FD/MAP-II/06

Removing unsv & S&F of Seat of Chair Verandha as per sample apporved

Removing unsv & S&F of Back of Chair verandha as per sample apporved

M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality after scrapping off the existing worn out paint with an electric grinder and required welding work (if any) complete all as specified & directed.

Removing unsv & Supply and Fixing PVC shoes .

Taking out carefully following old unserviceable parts of TABLE OFFICE OFFRS STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-1003 & 84

Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.

Removing unsv & S & F new drawers & cabinet all as per drawing.

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F hard rubber shoes to legs

Taking out carefully following old unserviceable parts of TABLE OFFICE CLERK STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-1004 & 84

Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.

Removing unsv & S & F new drawers & cabinet all as per drawing.

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F hard rubber shoes to legs

Taking out carefully following old unserviceable parts of TABLE 3'X2' WITH DRAWER STEEL and M & L for replacing with new parts as per existing or as per drawing :- : FD-1008

Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & Texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.

Removing unsv & S & F new drawers & cabinet all as per drawing.

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F hard rubber shoes to legs

Taking out carefully following old unserviceable parts of TABLE 3'X2' WITHOUT DRAWER STEEL and M & L for replacing with new parts as per existing or as per drawing :- : FD-1007

Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade & Texture as approved by Engr-in-Charge both side lamination with teakwood edging matching the color of the top.

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

S & F hard rubber shoes to legs.

Supplying & fixing the following parts of CHAIR WRITING in replacement of the old existing unserviceable parts of the chair as approved, shown on drawing & as directed by Engr-in-Charge :- MAP :- FD/E6/MAP/12

Removing of old unsv seat & S&F of Seat of 12 mm thick hot pressed plywood upholstered with fabric as approved by Engr-in-Charge & moulded polyurethane foam with PVC libing all around.The cushions shall be of 40 density, 75mm thick for seat.

Removing of old unsv back and S&F of back of 12 mm thick hot pressed plywood upholstered with fabric as approved by Engr-in-Charge & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge.

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Removing and Change of Tapestry cloth of Seat & Back of chair writing MAP as approved & directed by Engr-in-Charge

Handrest to match with existing all in shape, size, material & quality.

Rubber stoppers.

Taking out carefully following old unserviceable parts of TABLE 900X900mm and M & L for replacing with new parts as per existing or as per drawing :-: FD-1009

Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.

Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.

Hard rubber shoes for legs

Taking out carefully following old unserviceable parts of TEAPOY VARANDHA/TEAPOY VARANDHA MAP STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-20//255/383/ FD/E6/MAP/17

S & F of unsv Top of PRELAMINATED MDF board 18/19mm thick with matching Teak wood edging in shade & texture as approved by Engr-in-Charge

Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK/WHITE colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.

Hard rubber shoes for legs

Taking out carefully following old unserviceable parts of CHAIR SCHOOL WITH HAND BOARD and M & L for replacing with new parts as per existing or as per drawing :-:- FD/E6/MAP/05

S & F blowplastic one piece seat & back

S & F writing rest made out of 18mm thick prelaminated MDF board same as existing.

Rubber/PVC shoes

Painting to the steel structure of two coat of synthetic enamel paint of black colour after removing the old wornout paint all as specified by Engr-in-Charge,

TRESTLE STORE ROOM STEEL FD-1043

Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder after completeing welding work (if any) with workmanship and rest complete all as specified & directed by Engineer-in-Charge. Note: Painting work shall carried out in unit location

Taking out carefully following old unserviceable parts of TABLE BED SIDE MAP and M & L for replacing with new parts as per existing or as per drawing :- FD/MAP/15(R )

Removing of old unsv top (450x450mm) of table bed side and replace with 18mm prelaminated MDF board as approved by Engr-in-Charge with teek wood beeding.

Removing of old unsv back (550x400mm) of table bed side and replace with 06 mm commersial ply BWR grade as approved by Engr-in-Charge with teek wood beeding.

S & F of handles as approved by Engr-in-Charge

Material & labour for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder after completeing welding work (if any) with workmanship and rest complete all as specified & directed by Engineer-in-Charge.

S & Fixing of PVC/Rubber shoe for legs

Taking out carefully following old unserviceable parts of TABLE DINING OR STEEL and M & L for replacing with new parts as per existing or as per drawing :- FD-165(M)

Repair to table dining OR's including replacement of UNSV existing top with 18/19mm thick block board with 22 gauge aluminium sheet (1975x750) on top of Board to be properly fix.

Required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge.

S & Fixing of PVC/Rubber shoe for legs

RACK 3/4 SPACE STEEL FD-1023

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK / OG/ IVORY colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

RACK STEEL 6 TIER FD-1038/1023/1036

M & L for painting all over the steel structure with synthetic enameled paint of BLACK / OG/ IVORY colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Taking out carefully following old unserviceable parts of TABLE COMPUTER and M & L for replacing with new parts as per existing or as per drawing :-:- : FD/E6/MAP/03

Removing unsv Top of the Table and S & F of 18mm Prelaminated MDF Board approved shade and texture by Engr-in-Charge matching with PVC Edging all around the top of table.

Removing of unsv keyboard tray and S& F 18mm pre lamitated MDF board of keyboard tray as per drawing and fix with good quality of telescopic chanels.

Removing of unsv bottom tray and S&F of 18mm Pre laminated MDF board of bottom tray as per drg and as directed by Engr-in-Charge

S & F of nylon shoes hight adjustable type as approved by Engr-in-Charge

M & L for painting all over the steel structure with two coat synthetic enamelled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Taking out carefully following old unserviceable parts of CHAIR COMPUTER,CHAIR REVOLVING EXECUTIVE and M & L for replacing with new parts as per existing or as per drawing :-:- GODREJ,FD/E6/MAP/01

Removing unsv & S & F seat of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color.All as directed by Engr-in-Charge.

Removing unsv & S & F Back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color.All as directed by Engr-in-Charge.

Removing and Change of Tapestry cloth of Seat & Back of chair revolving as approved & directed by Engr-in-Charge

Removing unsv & S & F castor wheels as per the approved sample

Removing unsv & S & F handrest matching the previous all in shape,size,material & quality.

S & F pedestal assembly all matching the shape,size & quality of the previous.

Removing unsv & M & L for servicing synchro tilting mechanism.

Removing unsv & S&F of Hyduralic system as per drg and directed by Engr-in-charge------------------------------------------------------------------------------ Note :- A sum of Rs. 72359/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 25 & 26 (Schedule of Credit) of Tender documents.

Khatri Trunk Factory (BID ID -3408352)

vardhman traders (BID ID -3408591)