SPL REPAIR TO BUILDING NO P 74 UNIT KOTE AND MAGAZINE AT AHRR UNDER GE EM RR HOSPITAL, DELHI CANTT 10

Amount

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles all as specified.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface even and fair, complete all as specified and directed.

M&L for applying two coats of wall care putty on plastered surface of wall and making the surface even & fair for receiving distemper/ paint of any description, complete all as specified & directed.

M&L for applying two coats of wall care putty on plastered surface of ceiling and making the surface even & fair for receiving distemper / paint of any description, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint over a coat of weather resistant acrylic primer and two coats of wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over two coats of wall care putty over one coat of primer, complete all as specified & directed.

M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of exterior grade weather proof paint over two coats of wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surfaces of ceiling and applying two coats of oil bound distemper over two coats of wall care putty, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing) and rubbish off the premises, complete all as specified & directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed.

M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc 1.50 Sqm each, complete all as specified.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified.

S&F pressed steel frames made out of mild steel 1.25mm thick sheet, with with size of frame 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and applying a shop coat of red oxide primer including prividing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) for filling back of chowkhats, complete all as specified & directed.

S&F pressed steel frames made out of mild steel 1.25mm thick sheet, with size of frame 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and applying a shop coat of red oxide primer including prividing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) for filling back of chowkhats, complete all as specified & directed.

S&F 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, in first class soft wood, complete all as specified and directed.

S&F glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares with plain, chamfered or rounded mitred and rebated sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), in first class soft wood, complete all as specified & directed.

S&F aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified & directed.

S&F 150 mm long aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and directed.

S&F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F Door closer hydraulically regulated aluminium die cast body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

M&L for preparation of new or previously untreated steel and iron surfaces and applying two coats of synthetic enamel paint of any description over 10cm width or girth over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified.

S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified.

All as per item No 34 here-in-before but exc 0.5 m in each pane, complete all as specified.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube S&F in opening as per specification and drgs, complete all as specified.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.

S&F 100 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, complete all as specified & directed.

M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified & directed.

Taking up or down 15mm bore steel tubing and connections, complete all as specified & directed.

All as per item No 44 here-in-before but 20mm dia.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified & directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp, all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, complete all as specified & directed.

M&L for PVC floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, including embedding with PCC 1:2:4 type B-1, complete all as specified & directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified & directed.

S&F in repair white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, PVC waste pipe, vitreous china pedestal etc, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified & directed.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified & directed.

S&F in repairs PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 8-9 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified.

S&F in repairs bib taps, cast copper alloy, fancy type, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs two way bib cock chromium plated for fixing with flusing cistern/ jet spray/ health faucet etc, complete all as specified & directed.

S&F in repairs stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type), with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs two way angle cock chromium plated for fixing with flusing cistern/ jet spray/ health faucet etc, complete all as specified & directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, all as specified & directed.

S&F in repair tubular towel rail stainless steel chromium plated 20 mm dia D type 60 cm long between flanges, including brackets and fixed to walls, all as specified and as directed by Engineer-in-Charge.

S&F in repairs soap dish, brass CP any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs toilet paper holder of brass, cromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified.

S&F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed.

S&F in repairs corner glass shelf with bracket and fixing accessories, complete in all respect as specified.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed.

S&F in repairs brass CP sink mixture wall mounted of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, complete all as specified and directed

S&F waste coupling of PTMT (half or full threaded), minimum weight 60gms, suitable for discharge pipe of 40mm bore dia, complete all as specified & directed.all as specified.

Dismantling water tanks of capacity 500 ltrs and removing to store complete all as specified.

Dismantling water tanks of capacity 1000 ltrs and removing to store complete all as specified.

Supply and fix 1000 litres capacity double layer, rotational molded, polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.

Dismantling brick tiles or terracing tiles single layer on roofs, complete all as specified.

Demolition of mud/ mud phuska in roofs any thickness, including plastering and leaping if any and cleaning the roof surfaces with wire brushes and removal of mud /mud phuska to a distance exc 250 M and n exc 500 M, complete all as specified.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof padding including finished even & fair without using extra cement, complete all as specified and directed.

M&L for priming roof surfaces and applying water proofing treatment over roof including preparation & cleaning of roof surface comprising of the following complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (b) M&L for applying one coat of hot straight run bitumen @ 1.2 Kg/sqm of grade 85/25 confirming to IS-73 (Grade S-35), complete all as specified & directed. (c) M&L for laying 3 mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75 mm at sides and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminous primer, all as per manufacturer's instruction including preparation of surface. Note: Water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. Contractor shall give 10 years guarantee for effectiveness of water proofing treatment. 2.5% of workdone amount of this items shall be retained from the contractor payment for a period of 10 years reckoned from date of physical completion of the work or in lieu contractor may deposit bank FDR for the said tory for 10 years which shall be released by GE on the expiry of satisfactory completion fo 10 years period, complete all as specified and directed.

Excavation in trenches, in hard/dense soil, not exc 1.5 mtr wide and not exc 1.5 mtr deep for foundation, laying sewage lines or for shafts, manholes etc., not exc 10 sqmtr on plan and not exc 1.5 mtr depth etc and getting out excavated material, complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified.

Removal of excavated material not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified.

M&L in repair for factory made RCC drain cover with cover frame comprising of 75 mm thick cover, area of each cover slab exc 0.5 Sqm & n exc 1.00 sqm including provision of hot dip galvanized lifting hook for lifting overall cover with suitable size angle iron frame, RCC cover of M30 or higher grade concrete by vibro compression process, medium duty, confirming to IS-12592 including fixing on manhole, demolition of existing cover with cover frame and removal of debris from site complete all as specified and as directed.

Demolition and breaking upto 300 mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified.

M & L for cement concrete 1 : 4 : 8, type D-2, using 40 mm graded stone aggregate as in foundation mass concrete, complete all as specified.

M & L for PCC 1 : 3 : 6, C-2 as in concerete bed to drain pipe including packing under and haunching against the all sides of pipe 300 mm bore, complete all as specified.

M & L for 300 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collers, complete all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 75mm thick cement concrete as in flooring type D2 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and as directed.

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc. complete all as specified.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified.

S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over rendering coat in 10mm thick rendering coat complete all as specified.

Marble tiles 30cmx20cm x 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing laid over 20mm thick screed bed in CM 1:6 complete all as specified.

Demolition of cement concrete (un-reinf) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for providing cement concrete type C1 1:3:6 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified.

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan/plug/bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof/ wall/ floor by applying putty and applying colour/ white wash finish complete all as specified and directed.

M & L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed One light/fan/bell/exhaust fan point controlled by one switch. Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.

All as per srl item No. 102 here-in-before but One 3 Pin socket outlet 5 Amps on Independent board.

All as per srl item No. 102 here-in-before but One 3 Pin socket outlet 5 Amps on same board.

All as per srl item No. 102 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

S & F Modular Switch 1 way 16 A, 1 Module complete all as specified.

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified.

S & F Modular Switch 1 way 6 /10 A, 1 Module complete all as specified.

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified.

S & F Modular fan regulator step type, 120W 2 Module complete all as specified.

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed.

S & F in replacement of Modular AC Box, power socket with top 240 Volts AC complete with one SP MCB single pole 20 Amps concealed/ flush to wall surface complete all as specified and directed.

S & F in replacement of LED tube light fitting 20 watt (CW), 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K), PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

S & F in replacement of LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement of LED tube light fitting 40 watt (CW), 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K), PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

S & F in replacement of LED street / security light fittings 35/36 Watt inbuilt daylight sensor / astronomical timer which switches ON/OFF automatically in the absence/presence of sunlight ,high pressure die cast aluminium housing, IP 65 should have minimum efficiency at level >=120lumens/watt, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, an operating voltage range of 140-270V complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete as specified and directed.

Taking down unserviceable sub main wiring of aluminium any type with earth wire and making good disturbed surfaces of wall/ floor or roof etc and applying putty complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete all as specified. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit. 2. Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor.

S & F in replacement MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCB, SPN, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

S & F in replacement MCCB, 415 Volt, 16kA, 4 pole, 125 Amp capacity with over load and short circuit protection complete all as specified and directed

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 12 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCBs / MCBs and isolators etc and making all necessary connections complete all as specified and directed.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as specified.

Taking down carefully ceiling / exhaust fan of any size, sealing cable end, dismantling blades & removing fan and blades to store complete all as specified.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed

Painting of ceiling/Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan all as directed.

M & L Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all by means of nuts and bolt check nuts and washers of galvanised iron sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to and including earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil up to 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made but at 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

S&L in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 V grade aluminium conductorof 70 sqm, 3.5 core complete all as specified and directed.

S&F GI tubing light grade 50mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc. complete all as specified and directed.

Excavation in trenches not exe 1.5m depth and not exe 1.5m wide in Soft/loose soil and getting out complete as specified and directed

M & L for road cutting /hard standing for laying of cable and re making good the same to match the existing surface complete all as directed by Engr incharge.

Supply and spread river sand for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming.

Supplying laying, brick sub class 'B' common burnt laid in trenches for cable protection complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and refixing the same as per exiting floor tiles complete all as specified and directed

sony engineering works (BID ID -3147275)

V.K. Enterprises (BID ID -3147296)