Construction of Anganwadi centre at AKP thenpagam in sivakasi city municipal corporation

Amount

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed. (Hard Soil )

Depth 0.0 - 0.30m

Depth 0.30 - 0.60m

Above 0.60m

Collection and supply of gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. Rate for 10m3

Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4"x41/4"x2 3/4" for the following including curing etc., complete complying with standard specifications. Rate for 10m3

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing

Supplying and erecting centering shuttering including necessary supports for plane

Column

Grade Beam

Plinth Beam

Above Plinth

Floor finish with granolithic flooring in CC 1:2:4 mix using 10 to 12mm chips including cost and conveyance of all materials and labours etc., complete

Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per Sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. (The ceramic tiles should be got approved from the Departmental officers before execution).

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Plastering with cement mortar 1:3 mix to 10 mm thick including all cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Oil bound Distempering painting with two coats, Using Oil bound Distemper including cost and conveyance all materials and scaffolding charges etc., complete complying with standard specifications as directed by the departmental officers. Rate for 10m2.

Supplying of steel doors, windows, ventilators etc., with best approved best quality etc., complete complying with standard specifications and as directed by the departmental officers.

Door D 0.75 x 1.8

Door D1 1.0 x 2.1

Door D2 1.1 x 2.1

Window W 1.2 x 1.3

Jolly J 0.6 x 0.45

Baby friendly Toilet

Ventilator V 0.60 x 0.45

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Wiring with 2x1.5sqmm (22/0.3) PVC insulated singel core unsheated copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point/Fan point.(SD 23)

Supplying and fixing of HDPE tank (1000 Litre) including cost of tank and fixing in position all labor charges etc. complete as per standard specification.

Supply and delivery of PVC and GI Specials as Per Standard Specification Asper TWAD P.No. 37 (5.1B)

32mm gi pipe

32mm gi tee

32mm gi elbow

32mm gi copling

32mm gi union

1"hex nipple

Wiring with 2 x 2.5 Sq.m PVC unseathed S.C. alucable of 650 V grade insuitable PVC regid pipe consealed in wall with teak wood switch box with bylem sheet cover for 5A3 pin flush type non inter locating C.S. plug including pit top with continous earth wire connection of plug point (SD 38)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated singel core unsheated copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point/Fan point.(SD 23) Electrical Data 2019-2020)

Supplying and fixing of 1200mm Sweep AC ceiling fans completed with stepped electornic 300W regulatore with the existing down rod on the existing clamps.(SD 107) Electrical Data 2019-2020)

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

S BALAN (BID ID -1321430)