Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.7 L
EMD Value
₹19,360
Closing Date
28 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GARRISON ENGINEER AIR FORCE BIHTA
Military Engineer services AF Stn Bihta 801103
IMPROVEMENT TO POWER HOUSE (71SU) AT AIR FORCE STN BIHTA.
2026_MES_793335_1
GE/AF/BHT-33/2026-27
Open Tender
Civil Works
Item Rate
180 days
Bihta
Refer NIT and Tender Documents
8 documents required · 8 mandatory
₹500
GE AF BIHTA
₹19,360
Yes
10 Oct 2026
10 Oct 2026
9 Nov 2026
10 Oct 2026
28 Oct 2026
22 Oct 2026
10 Oct 2026 - 22 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1B/R WORKS | |||||
| 1.01 | PCC type B-0 (1:2:4), using (12.5 mm graded stone aggregates) as in roof padding, kerbs, or mud stops, rounded or chamfered on edge , complete all as specified. | 0.97 | Cubic Metre | - | - |
| 2 | Reinforced cement concrete, type B-1,(1:2:4), (nominal mix) using 20 mm graded stone aggregates, as in as in lintels over 1.5 metre clear span, cills, steps, seismic and other similar band, plinth courses, lacing courses , copings, kneelers, apex stones, bed plates, water troughs and the like complete all as specified. | 2 | Cubic Metre | - | - |
| 3 | Brick with subclass 'B' brick, straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified. | 3 | Cubic Metre | - | - |
| 4 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, complete all as specified. | 2 | Square Metre | - | - |
| 5 | Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain printed colour PVC sheet and edges will be painted to match with printed sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified. | 10 | Running Metre | - | - |
| 6 | Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 35 mm,etc complete all all as specified. | 3.6 | Square Metre | - | - |
| 7 | Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified. | 1.8 | Square Metre | - | - |
| 8 | Factory made solid PVC moulded door shutter, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick plain colur PVC sheet on back face, as shown on page 181 of MES Schedule Part-II, complete all as specified. | 3 | Square Metre | - | - |
| 9 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long, complete all as specified. | 2 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Tender332627.pdf
Tender Documents • 1.20 MB
BOQ_889664.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .