Renovation of house No. 1355 and house No. 1359 BBMB Dispensary Chandigarh.

Amount

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. CSR item No. 30.94.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. CSR item No. 30.95 .

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colors such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. CSR item No.14.72

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) (a) Size 600x600 mm as per CSR item no. 14.115 (a)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. CSR 14.128.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. As per CSR item no. 13.81

P & F LED lights in false ceiling including holder fittings etc. complete in all respect. (NS item) i) LED Light for cove 5/6 watt

i) Flexible pipe

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.CSR item No. 30.85 ( a) Size 75mm x 75mm

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (a) 15mm i/d .As per CSR item No. 28.35 (a)

Providing and fixing in position Chinaware Floor Mounted One piece EWC type with matching chinaware cistern 10 ltr. Capacity.(without cistern fitting) with P trap or S trap of approved make ( to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (b) Chinaware floor mounted one piece EWC rim less type with matching chinaware cistern 10 ltr. capacity (without cistern fitting) size 69x36x74 cm with P trap S trap and seat cover complete in all respect. CSR item No. 30.3(b) .

Providing and fixing Stainless steel health faucet complete in all respect CSR item NO. 30.24 .

P & F in position S.S grating with frame of approved make (to the approval of Engineer-in-charge) complete in all respect. CSR item No. 30.80 .

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. CSR item No. 30.31 (iii)Size 630 mm x 450 mm x 830 mm .

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. i) Vitreous chinaware standard white pedestal for wash hand basin CSR item No. 30.43(i) .

(v) C.P. brass 3-Hole Basin Mixer Without Popup Waste System. CSR 30.69 (A) (v) .

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make ( to the approval of Engineer-in-charge) complete in all respect. B. C.P. Brass Accessories: (i) C.P. brass towel rail 600 mm long. C.S.R item No. 30.69 (B) (i) .

(ii) C.P brass towel ring square. C.S.R item No. 30.69 (B) (ii) .

(iii) C.P. brass soap dish holder with glass dish. C.S.R item No. 30.69 (B) (iii)

(iv) C.P. brass toilet roll holder with flap. C.S.R item No. 30.69 (B) (iv) .

P&F in position 5mm thick bevelled edge mirror superior glass (of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm,C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge). (a)Size 600mmx 450mm. CSR item No. 30.61(a) .

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. CSR item No.30.65 (A) C.P. brass Bib cock long nose/long body foam flow without flange.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. (i) C.P. Brass extension piece, 25mm long to 50mm long. CSR item No. 30.64 (B)(i) .

P & F in position C.P. brass Hexa Nipple15mm of approved make (to the approval of Engineer-in-charge) complete in all respect. CSR item No. 30.64 (C) .

P & F in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect (b) PVC tube connection of size 15mm x 450 mm with C.P. Brass nut.. CSR item No.30.72(b) .

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed CSR item No. 16.12 .

Scraping (a) White wash and colour wash CSR item No. 8.31 (a) .

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish CSR item No. 16.65 .

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint CSR item No. 16.18 .

Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in- charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect CSR item No. 30.101 (a) 25 litre capacity water heater.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled as per CSR item No. 8.26 (a) Doors of area 3 sqm and below.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) as per CSR item No. 17.45 (a) For fixed portion and chawkhats.

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required as per CSR item No. 17.45 (b).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on Both side as per CSR item No. 17.46 (ii) .

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) as per CSR item No. 17.47 (i).Float glass panes of 5 mm thickness

Providing and fixing wire mesh in aluminum door, window, ventilator shutters and partitions etc.. with PVC plug/ neoprene gasket etc. complete as per architectural drawings and the directions of Engineer-in-charge. (AOR)

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) as per CSR item No. 17.23 (ii)For shutter area above 0.50 sqm

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. Complete as per CSR item No. 17.43 (C) I.S.I Designation No. III (size of door 851mm to 1000mm).

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position as per CSR item No. 18.04 .

Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete upto any pitch in orizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per CSR item No. 13.27 (v) (d) Polycarbonate sheet 2mm thick solid type.

GARG BUILDERS

VISHAL CONTRACTOR