REPAIR TO VARIOUS WOODEN FURNITURE AND POLISHING OF WOODEN FURNITURE UNDER BSO (SOUTH) OF GE (SOUTH) MEERUT CANTT

Amount

Chair Dining Offrs (FD/MAP-II/04). Supply and fix new rear leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 1.00 above but front leg .

All as per item No 1.00 above but stiffener long .

All as per item No 1.00 above but stiffener short.

All as per item No 1.00 above but seat stiffener long.

All as per item No 1.00 above but seat stiffener short.

All as per item No 1.00 above but stiffener for back.

Supply and fix in seat of chair made of plywood 8mm thick with cushion 75mm 40 density. Make :Sleepwel/Curlon/ Godrej including tapestry cloth not less than Rs 150/RM including removing old part without damaging other parts all as specified and directed by Engr-in-Charge

Material and labour for scrapping of old polish and dirt from the surfaces of chair dining, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge

Chair Medium (APS) (Drg CWE/MRT/wd/488 ). Supply and fix new rear leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 10.00 above but front leg .

All as per item No 10.00 above but stiffener long .

All as per item No 10.00 above but stiffener short.

All as per item No 10.00 above but seat stiffener long.

All as per item No 10.00 above but seat stiffener short.

All as per item No 10.00 above but stiffener for back.

Supply and fix seat of chair made of plywood 12mm thick with 1mm Mica.complete all as specified and directed Engr-in-charge.

Material and labour for scrapping of old polish and dirt from the surfaces of chair WBB, preparation of surfaces using sand paper and applying polish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-charge

Table 3'x2' with and without Drawer (Drg No FD-283 / 284. Supply and fix for new top made of 18/19mm prelaminated MDF board one side and fixing of Ist class teakwood edging 20mmx 6mm all around duly polished size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 20.00 above but batten side rail long .

All as per item No 20.00 above but batten side rail short .

All as per item No 20.00 above but stiffener long .

All as per item No 20.00 above but stiffener short.

Supply and fix drawer complete made of Ist class teakwood 12mm thick and fixed with 6mm plywood at bottom for table with drawer complete all as specified and directed.

Material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying polish in required coats to give glossy finish etc complete all as specified and directed.

TEPOY 600X450X540MM SIZE (FD-382) :- Supply and fix for new top made of 18mm prelaminated MDF board one side and fixing of Ist class teakwood edging 20mmx 6mm all around duly polished size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 28.00 above but top batten stiffener long .

All as per item No 28.00 above but top batten stiffener short .

Material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying polish in required coats to give glossy finish etc complete all as specified and directed.

TEBLE CENTRE 900X450MM SIZE (FD-274) :- Supply and fix for new top made of 18mm prelaminated MDF board one side and fixing of Ist class teakwood edging 20mmx 6mm all around duly polished size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 33.00 above but top batten stiffener long .

All as per item No 33.00 above but top batten stiffener short .

All as per item No 33.00 above but bottom batten stiffener short .

Material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying polish in required coats to give glossy finish etc complete all as specified and directed.

CHAIR WBB (FD-225):- Supply and fix new rear leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 38.00 above but front leg .

All as per item No 38.00 above but stiffener long .

All as per item No 38.00 above but stiffener short.

All as per item No 38.00 above but seat stiffener long.

All as per item No 38.00 above but seat stiffener short.

All as per item No 38.00 above but stiffener for back.

Supply and fix seat of chair made of plywood 6mm thick including removing old part without damaging other parts all as specified and directed by Engr-in-charge

Material and labour for scrapping of old polish and dirt from the surfaces of chair WBB, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed.

STOOL DRESSING (FD-282):- Supply and fix new seat frame front rail made out of Ist class teakwood duly holed for canning , size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 47.00 above but seat frame side rail.

All as per item No 47.00 above but legs.

All as per item No 47.00 above but stiffener long/short.

Material and labour for canning of stool dressing with 2mm MPI cane godrej pattern as shown in drg as directed by Engr-in-charge.

Material and labour for scrapping of old polish and dirt from the surfaces of chair WBB, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed.

PEG TABLE(FD-384):- Supply and fix for new top made of 18mm pre-laminated MDF board one side and fixing of Ist class teakwood edging 20mmx 6mm all around duly polished size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 54.00 above but top batten stiffener long .

All as per item No 54.00 above but top batten stiffener short .

All as per item No 54.00 above but bottom batten stiffener short .

Material and labour for scrapping of old polish and dirt from the surfaces of chair dining, preparation of surfaces using sand paper and applying polish in required coats to give glossy finish etc complete all as specified and directed.

Chair Dining (279/FD/MAP-II/05). Supply and fix new rear leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 59.00 above but front leg .

All as per item No 59.00 above but stiffener long .

All as per item No 59.00 above but stiffener short.

All as per item No 59.00 above but seat stiffener holed for canning.

Material and labour for canning for chair with 2mm MPI cane godrej pattern as shown in drg and directed by Engr-in-charge.

All as per item No 59.00 above but stiffener for back.

Removing of unserviceable PVC sheet from chiar dining MAP and making suitable for canning as per old drg by making holes for complete all as specified and directed.

Material and labour for scrapping of old polish and dirt from the surfaces of chair dining, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed .

CHAIR EASY(FD-229):- Supply and fix new rear leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 68.00 above but front leg .

All as per item No 68.00 above but seat fram front rail duly holed for canning .

All as per item No 68.000 above but seat fram back rail duly holed for canning

All as per item No 68.00 above but seat fram side rail duly holed for canning

All as per item No 68.000 above but batten rail under seat frame.

All as per item No 68.00 above but hand rest.

Material and labour for canning for chair with 2mm MPI cane godrej pattern as shown in drg and directed by Engr-in-charge.

Material and labour for scrapping of old polish and dirt from the surfaces of chair easy, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed.

CHAIR WRITING (FD-280):- Supply and fix new rear leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 77.00 above but front leg .

All as per item No 77.00 above but stiffener long.

All as per item No 77.000 above but stiffener short.

All as per item No 77.000 above but stiffener for back.

All as per item No 77.00 above but seat stiffener duly holed for canning

Materila and labour for canning for chair with 2mm MPI cane godrej pattern as shown in drg and directed by Engr-in-Charge.

All as per item No 77.00 above but hand rest.

Material and labour for scrapping of old polish and dirt from the surfaces of chair easy, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

BED WITH FLYWOOD(FD-246):- Supply and fix new plywood of size 6'x3' of 12mm thick plywood ISI mark BWR of size as per drg and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 87.00 above but new long rail of Ist class teakwood.

All as per item No 86.00 above but 4mm thick veneared phenol bended plywood one side teak face on both sides of head rest of the bed and provision of 4mm thick teakwood beading all round all as sper drg.

All as per item No 86.00 above but 4 mm thick veneared phenol ended ply wood one side teak face on both siede of foot rest of the bed and provision of 4mm thick teak woode beading all round all as per drg.

All as per item No 87.00 above but new centre support of hardwood (sesam/Saal) as per Drg and directed by Engr-in-Charge.

All as per item No 87.00 above but new MS flat iron clamp 150x30x5mm as per drg.

Material and labour for scrapping of old polish and dirt from the surfaces, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed.

TABLE DINING FOR 6 PERSON(FD-273):- Supply and fix new top of size 1500x900mm of 18/19 pre-laminated MDF board, teak face one side duly provided with Ist class 4mm thick half round teekwood beanding all around, size as per drg and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 95.00 above but new long rail.

All as per item No 95.00 above but new side rail.

Material and labour for scrapping of old polish and dirt from the surfaces, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

TABLE DINING FOR 8 PERSON(FD-249):- Supply and fix new top of size 1800x900mm of 18/19 pre-laminated MDF board, teak face one side duly provided with Ist class 4mm thick half round teekwood bending all around, size as per drg and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 100.00 above but new long rail.

All as per item No 100.00 above but new side rail.

Material and labour for scrapping of old polish and dirt from the surfaces, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

SIDE BOARD(FD-371):- Supply and fix new two nos of shutters with 18/19mm pre-laminated MDF board one side with naturla teakwood venner one one side including piano hinges and knobs complete, size as per drg and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 104.00 above but front rail of drawar table replaced with prelaminated MDF board on one side 18mm thick with teakwood endging 4mm thick.

All as per item No 104.00 above but bottom of drawer made out of 6mm thick plywood commercial and fitted in drawer frame.

All as per item No 104.00 above but knobs chromium plated 35mm with bolt and nut.

All as per item No 104.00 above but back of side board with 6mm thick plywood commercial as specified.

All as per item No 104.00 above but top of board with 18mm thick plywood & teak finish veneer.

All as per item No above but 104.00 Two side of baord with 18mm thick plywood & teak finish Veneer.

All as per item No 104.00 above but legs of side board made out of Ist class teakwood.

All as per item No 104.00 above but bottom stiffener long made of Ist class teakwood.

All as per item No 104.00 above but bottom stiffener short made of Ist class teakwood.

Material and labour for scrapping of old polish and dirt from the surfaces, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

TABLE WRITING (FD-249):- Supply and fix new top of table writing replaced with 18/19mm pre-laminated MDF board on one side duly provided with Ist class 4mm thick half round teakwood beading all around duly polished size as per drg and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 116.00 above but batten side rail long made of Ist class teakwood.

All as per item No 116.00 above but bottom batten stiffener short made of Ist class teakwood.

All as per item No 116.00 above but bottom batten stiffener long made of Ist class teakwood.

All as per item No 116.00 above but batten side rail short made of Ist class teakwood.

All as per item No 115.00 above but Drawer front sides with pre-laminated MDF board one side 18mm thick including chromium plated knob.

All as per item No 115.00 above but bottom drawer with 6mm thick plywood commercial type all as specified and shown in drg.

All as per item No 115.00 above but replacement of shutter with 18/19 mm pre-laminated MDF board on one side with 4mm thick teak wood edging duly plished and and piano hinges screwed and new knob all as shown in drg.

All as per item No 115.00 above but back of table writing with 6mm thick plywood commercial type all as specified and directed.

All as per item No 115.00 above but sides of table writing with 18mm thick plywood teak finish as specified and directed.

material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

TABLE 900X900X760MM(FD-291):- Supply and fix new top of table replaced with 18/19mm pre-laminated MDF board natural teak finish including Ist class 4mm thick half round teakwood beading all around duly polished, and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed."

Supply and fix new legs made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed..

All as per item No 128.00 above but bottom side rail (both side) made of Ist class teakwood.

material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed.

HAT STAND WITH MIRROR (FD-361):- Supply and fix new replacement of decorative plywood 4mm thick of front size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed."

All as per item No 131.00 above but replacement of mirror 5mm thick make Modi Guard.

All as per item No 131.00 above but replacement of teakwood beading 35x5mm complete.

All as per item No 131.00 above but remplacement of AI peg 100mm

All as per item No 131.00 above but remplacement of back plywood 12mm thick.

Material and labour for scrapping of old polish and dirt from the surfaces of hat stand, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

BOOK CASE (FD-237):- Supply and fix new plywood 6mm thick of back, size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed."

All as per item No 137.00 above but top MDF board 18mm thick

All as per item No 137.00 above but side MFD board 18mm thick

Supply and fix new bottom stiffener long made of Ist class teakwood without damaging other components and including removing old part.

All as per item No 140.00 above but bottom stiffener short made of Ist class teakwood.

All as per item No 140.00 above but legs made out of Ist class teakwood.

All as per item No 137.00 above but replacement of shutter with 18/19 mm MDF board on one side teak faced with 4mm thick teak wood edging duly polished and piano hinges screwed and new knob all as shown in drg.

Material and labour for scrapping of old polish and dirt from the surfaces of book case, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

TABLE DRESSING LADIES:- Supply and fix new plywood 6mm thick back, size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed."

All as per item No 145.00 above but replacement of mirror 5mm thick. Make- Modi Gaurd

All as per item No 145.00 above but replacement of commercial plywood 18 mm thick with sunmica of box top.

All as per item No 145.00 above but replacement of plywood 18mm thick with veneer of box both sides.

All as per item No 145.00 above but replacement of plywood 18mm thick of bottom box.

Supply and fix legs made out of Ist class teakwood without damaging other components and including removing old part.

All as per item No 150.00 above but bottom stiffener long made of Ist class teakwood.

All as per item No 150.00 above but bottom stiffener short made of Ist class teakwood.

All as per item No 150.00 above but sliding glass shutters with aluminum channel.

material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

TABLE DRESSING GENTS:- Supply and fix new plywood 6mm thick back, size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed."

All as per item No 155.00 above but replacement of mirror 5mm thick. Make- Modi Gaurd

All as per item No 155.00 above but replacement of commercial plywood 12 mm thick with sunmica of box top.

All as per item No 155.00 above but replacement of plywood 12mm thick with veneer of box both sides.

All as per item No 155.00 above but replacement of plywood 12mm thick of bottom box.

All as per item No 155.00 above but knobs chromium plated 35mm with bolt and nut.

material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

TABLE BOUBLE SEATER (APS) (DRG NO CWE/MRT/TW/487). Supply and fix new leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

Supply and fix new table top with 18mm plywood duly covered with 1mm Mica natural teak finish including Ist class 4mm thick half round teak wood beading all around duly polished including removing old part without damaging other components.

All as per item No 163.00 above but replacement of bottom of box with commercial ply wood 18mm thick with teakwood beading.

All as per item No 163.00 above but long rail.

All as per item No 163.00 above but side rail .

All as per item No 163.00 above but bottom stiffener long made of Ist class Hard wood (Sesam/Saal).

All as per item No 163.00 above but bottom stiffener short made of Ist class Hard wood (Shesham/Saal).

Material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

SOFA SET 5/4 SEATER (FD-281). Supply and fix new leg made out of Ist class teakwood size and shape as shown drg without damaging other parts including removing old part components complete all as specified and directed.

All as per item No 170.00 above but new handle.

All as per item No 170.00 above but new long rail for single.

All as per item No 170.00 above but new long rail for 3 seater.

All as per item No 170.00 above but new side rail .

Supply and fix wooden corner brakets of various chairs.tables/teapoy all as per drg including removing old part without damaging other components.

All as per item No 175.00 above but replacement of PVC shoes of various chairs/tables/teapoy.

Material and labour for scrapping of old polish and dirt from the surfaces of table, preparation of surfaces using sand paper and applying poish in required coats to give glossy finish etc complete all as specified and directed by Engr-in-Charge.

Sunny Furniture Centre

Laxmi Furnitures & Engg

Jain Engineering Works