SPECIAL REPAIRS TO BLDG NO P 177 AND PROVN OF ELECTRIFICATION, LIGHTING AND ALLIED WORKS AT UMROI MIL STATION UNDER GE UMROI

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each of any discription, complete all as specified and directed

-Ditto- as per item No 1 above but area n.exc. 1.5 Sqm each, complete all as specified and directed

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded, complete all as specified and directed

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, complete all as specified and directed.

S&F of factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F pressed steel door frame 125x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick etc, complete as specified and directed.

Supply and fixing of 32 mm thick waterproofing and fire proofing Flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm aluminum anodised bow handles, complete all as specified and directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm aluminum anodised bow handles, complete all as specified and directed.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised, 150mm, complete all as specified and directed.

S&F Butt hinges 100mm long (type C 21) extruded aluminium alloy, complete all as specified and directed.

S&F Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter for windows/ventilator with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 4 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 104 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle, complete all as specified and directed.

M&L for applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.

Supply and fixing of false ceiling of designer tile ivory /white painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, complete all as specified and as directed.

M&L for dismantling broken floor heart or wall tiling incl cement mortor bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed, in cement mortar 1:6 or bedding layer of mortar, complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

M&L for coloured Non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 350x250x7mm / 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or Coloured cement to match as in dado/skirting, complete all as specified and directed.

Dismantling AC/GI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets, complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating (PPGL) 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridge/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating (PPGL) 0.50 mm thick based plain steel sheet as in ridge an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

M & L for complete removal of exisiting treatment on wall surface and apply two coat of oil Bond distemper over 1.5 mm thick wall care putty including one coat of primer, complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash, complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint), complete all as specified and as directed.

M&L for preparation of old steel painted surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over one coat of red oxide primer, complete all as specified and as directed.

Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof. b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs. e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm. f) The whole system shall be left for air cure for min Seven days (without any movement). Make : - STP ShaliCryl LM or Dr Fixit Newcoat Ezee or Berger Home Shield PU RoofKoat or Asian Paints Smartcare Damp Proof , FOSROC or SIKA or as equivalent approved by GE. Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution. (ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) Product should confirm ASTMD-6083 (iv) The work shall be executed through well-trained applicators as per manufacturer’s instructions after obtaining written approval from the GE

Taking up or down GI tubing 15/20mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.

S&F for CPVC pipes of 20 mm outside dia, SDR 11 and plainf CPVC SDR 11 fittings on walls/ ceiling or laying in wall/ceiling or laying in floors, complete all as specified and directed.

Supply & Fixing UPVC of 20 mm outer dia UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all UPVC plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leakproof, complete all as specified and directed.

Cutting chases for concealed pipe where required and pointing in cement mortar 1:3 etc. in Brick walls/Concrete surface for bore of pipe 15/20 mm, complete all as specified and directed.

S&F of 500 Ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) hoisted and fixed in position, complete all as specified and directed

S&F of 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete, screwed for iron pipes or brass ferrule and fixed, complete all as specified and directed

S&F of 25 mm bore gun metal, glove or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15mm bore pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated serewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes, complete all as specified and directed.

S&F in repairs, 15mm bore Bib taps long body with wall flange fancy type chromium plated cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair two way angle valve with wall flange 15mm bore cast copper alloy chromium plated, complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, low level flushing cistern white complete with inlet, ball valve float and handle incl bracket, complete all as specified and directed.

S&F MS chromium plated soap dish heavy grade fixed to walls with brass screws complete all as specified and directed.

S&F PVC connection pipe 15mm size & 450mm long with chromium plated brass coupling on both ends, complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand, complete all as specified and directed.

Material and labour for complete removal of loose/ cracked concrete including reinforcement if required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of reinforcement ( including reinforcement) if required complete and applying 3 coats of white wash / 2 coats of cement base paint to match with existing surfaxes as directed by engineer in charge complet( Note reinforcement will be measured and pai seperately under respective items), complete all as specified and directed

S&F in repairs vitreous china squating pan 'Orrisa' pattern long pan size 580x 440 mm , white with foot rest (excluding flushing cistern and flush pipe) but including cast iron trap and making good to floor complete all as specified and directed.

S&F as in repair concealed stop cock with long shank and sheet flange cast copper alloy, screwed down high pressure, with round operating knob for 15 mm bore pipe or for unions, complete all as specified and directed

S&F in repairs CP waste coupling 32mm (half or full thread), complete all as specified and directed

M&L for Grating doom 100mm dia of PTMT ( Minimum weight 25gm), complete all as specified and directed

S&F in repairs PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) in 75mm bore dia, complete all as specified and directed

M&L for cement concrete 1:2:4, type B-1, using 40mm graded stone aggregate as in surface channel and saucer drain etc, complete all as specified and directed.

Extra for forming fair finished of drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed.

Taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in two layer on brick work or concrete surface of wall 5mm thick plaster in CM 1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6, complete all as specified and directed. (Note : WPC shall be measured & paid separately)

Supply only water proofing compound.

M&L for 10mm thick rendering on brick or concrete surface of wall/ceiling in cement mortor 1:4 surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 1.5 mm thick wall care putty on wall, complete all as specified and as directed.

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty).

Taking down PVC eave gutter and rain water pipe/waste water pipe (any size or description) including all fixtures, heads, shoes, bends, swan necks, etc including stacked at site and also removal from site, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius with access door, complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, large hasp and staple, chains, clamps, hold fasts, wall ties etc and small articles confirming to Fe290 Gde-E-165, complete all as specified and as directed.

S&F in repairs Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth without using extra cement, complete all as specified and as directed.

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. to be measured separately) and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as directed by the Engr-in-Charge.

Material and labour for point wiring for the One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed as below :- Note:-Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge.

All as per serial item No 73 here in before but for one 3 pin 5 Amp socket outlet on independent board

All as per serial item No 73 here in before but for one 3 pin 5 Amp socket outlet One light point controlled by two, two way switch.

All as per item No 73 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed and directed.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, two way complete all as specifed and directed.

Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified and directed.

Supply & fixing of call bell switch complete all as specified and directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified and directed.

Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.

Supply & fixing ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280 V, complete all as specified and directed.

Supply and fix in repairs of MCB SPN DB 8 way double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings, complete all as directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC casing and caping of adequate size and making electric connections including one run (FRLSH) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.0 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply, laying, testing and commisioning cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core, complete all as specified and directed.

Excavation in trenches not exe. 1.5 m wide and not exe. 1.5m in depth for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed.

Supply and spread sand in trenches as sand cushioning to underground cable for protection with fine river sand and provide required cover after punning down complete all as specified and directed. (Note: Thickness of sand cushion after punning down will be measured and paid.)

M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat abutting each other with gaps not exceeding 10mm and brick shall be laid perpendicular to lenght of trench/cable, complete all as specified and directed.

Removing surplus excavated materials (soil) upto a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point complete all as specified and directed.

S&F in repair, 32 mm bore GI tubing “light grade” in trenches/ on pole for protection of cables complete all as specified & directed.

M&L for PCC ( 1:3:6) type C-2 Using 40 mm graded stone aggregate as in foundation of stay assembly , poles struts etc. complete all as specified and as directed .

Supply and fixing all in one comprising of high efficiency LEDs (120 lm/W), solar street Light with luminaire wattage 15W, High Efficiency Mono Crystalline Solar PV Module 12V 50W, lithium Ferro phosphate battery 12.8V 18Ah with inbuilt BMS technology, high efficiency LED >93%, MPPT solar charge controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming nad brightness of light leads to extend working time and incl. 4 mtr long octagonal pole (type CPT-4030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm including foundation of pole. Make: Crompton Cat No CSADSMP15CDL-NC, Havells SOLAR AIO 15W or its equivalent in Philips/Bajaj

Supply and fix LED Bolard light of 10 watt in IP 65 to ensure sustainable performance in all sections and aesthetics. Make:- Crompton Cart part no.LPLTW-10-CDLor equivalent .Note:- Rate should be quoted incldg foundation or civil work.

S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 40 mm 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old unsv / fully rusted existing unsv one complete all as specified and directed.

Supply and fixing High performance LED streetlight, contemporary designed housing made of die-cast aluminium, with street optic lens, for uniform light distribution. Rated IP66,Efficacy ≥ 110 LPW and repair/replacement warranty of minimum 3 years of capacity 60W. Make: Wipro Cat. Part No.Skyline|LR02 and equivalent to Havells, Crompton.

Schedule of Credit

M/S UB ENTERPRISE

M/s Mangal Enterprise