Construction of Control Room and providing Trf Plinth and allied civil works and SS Erection works for Enhn. of PR.TRF from 1X5 MVA to 1X8 MVA at Eachampadi 33/11 KV SS in Dharmapuri EDC.

Amount

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - In Hard Gravely Soil

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - MR and DMR not requiring blasting

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - Hard rock requiring blasting

PCC 1:3:6, using 20mm HBG machine crushed metal for foundation padding concrete including cost of cement and all materials, curing, lead, lift etc.,complete.

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth with formwork including cost of cement all materials,labour,lead lift, curing etc., complete. - With form work

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for column, plinth beam and grade beam including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. - column and footing below ground level

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for column, plinth beam and grade beam including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. - column upto ground level

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for column, plinth beam and grade beam including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. - Grade beam and Plinth beam

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for column, plinth beam and grade beam including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. - Column above ground level

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - loft

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Lintel beam

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Sunshade 0.6m width

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Beam

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Roof slab 125 mm tk.

RCC1 :1.5:3 mix using 12mm to 20mm HBG metal ( machine crushed ) for Breaker plinth and culvert with formwork including all cost labour materials lead lift etc complete but exculding cost of steel reinforcement - Breaker plinth with form work

RCC 1:1.5:3 mix using 12mm to 20mm HBG metal (machine crushed) for precast slab with form work including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement ( By using mixer machine and vibrator )

Brick work in CM 1:5, using good quality country bricks for cable duct of size 23 x 11 x 7 cm including cost of all materials, labour, lead, lift, curing and transporting etc., complete.

Brick work in CM 1:4, using good quality chamber bricks for super structure of size 23 x 11 x 7 cm including cost of all materials, labour, lead, lift, curing and transporting etc., complete.

Flooring with Vitrified tiles 0.6 x 0.6m of approved Quality, design & colour laid in cement mortar 1:3 - 20mm thick over concrete with p.c.c 1:4:8 100 mm thick including pointing with same coloured cement finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Flooring with best quality of Anti Acid non – slippery colour ceramic tiles laid in cm 1:3, 20mm thick and pointed with same colour cement over a bed of PCC 1:5:10, 100mm thick using 40 mm HBG metal for battery room floor, including cost of all materials, labour, lead, lift etc. complete. (make: Johnson,Regency)

Supplying and fixin of non-slippery ceramic tiles of approved quality and colour for toilets laid over the CM 1:3, 100mm thick flooring over p.c.c 1:4:8 concrete 100 mm thickand finished to slope and hatched including cost of all materials, labour, lead, litf etc., complete.

Daddoing inside the wall at toilet with glazed tiles to a height of 1m over CM 1:3, 12mm thick and joint shell be finished with white cement including cost of cement, all materials, labour, lead, lift and curingetc., complete.

Dadooing with approved quality of anti-acid colour ceramic tiles laid in cm 1:3 12mm thick and pointed with same colour cement for battery room from floor level including cost of all materials, labour, lead, lift etc. complete (make: Johnson, Regency)

Plinth protection in PCC 1:4:8. using 40 mm HBG metal for 100 mm tk. and finished the surface with CM 1:3, 20mm tk. including cost of all materials, labour, lead, lift and curing etc., complete.

Providing and laying weather proof Tiles 300mmx300mm size over screed concrete1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tils of approved quality using in CM 1:3, 12mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc., complete.

Supplying and fabrication and placing in position MS/ RTS steel reinforcement for RCC works including labour for curing , bending, tying and fixing in position including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with CM 1:5, 12mm thick for inside and out side walls including cost of all materials, labour, lead, lift etc., complete.

Plastering with CM 1:3, 12mm thick for ceiling including cost of all materials, labour, lead, lift etc., complete.

White washing two coats by using emulsion paint over primer coat with white colour for ceilings including cost of all materials, labour, lead, lift etc., complete.

colour washing Two coats inside walls using Interior emulsion paint over aprimer one coat and two coats of wall putty including cost of all materials, labour,lead, lift etc., complete.

Colour washing two coats out side walls by using Exterior emulsion paint over a primer one coat of approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Labour charges for Fabrication and fixing of Template for as per specification and drawing including cost of all materials labour lead lift etc.,complete.

Labour charges for fixing of Template including aligining in position including labour lead lift etc.,complete.

Fabrication and supply of GI grouting bolt for plinths as per specification and drawing including cost of all materials labour lead lift,Transport from chennai etc., complete.(20 mm Dia 1.2 m length)

Labour charges for fixing of grouting bolt including aligining in position including labour lead lift etc., complete.

Supplying and filling of stone chips 12 mm to 20 mm HBG metal with 150 mm thick all lead and lift including and all other T&P etc., complete.

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 40 mm dia pipe.10kg/cm2

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 32 mm dia PVC 10 kg

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. - 20 mm dia PVC 10 kg

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. - 40 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.- 32 mm dia gate valve

Supply and erection of 20 mm PVS Tap for earth pits.

Providing UPVC Door and fixing casement doors fabricated from unplasticized polyvinyl chloride(UPVC) sections .The Profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joint mired and fusion welded.windows should be steel reinforced with 25x24x25mm steel reinforced with thickness of 1mm to have dimensional stability.The sash should be of 602x102mm. The mullion should be of 60x74mm.The profile should have coextruded seals.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work cost of all materials , lead, lift , etc. complete, as per standard specification

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 8mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed or Pin headed/Fluted/Figured glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer befoe use on work and as per specifications

Supplying and fixing in position of PVC door shutter made of Single Pannel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminiam towel bolt hinges etc., complete.

Providing and fixing sanitary fitting consisting of Neycer/parryware of oriya patten Water Closet 580x440 mm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

Supply and fixing of wash basin of size 550x400mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws & towel rod etc., complete.

Supplying and fixing of 15mm high quality brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Letter writing the Name of Sub-Station and slogans including cost of paint, labour for writing complete in all respects.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator). (SD 22)

Wiring with 2 x 1.5 SQ mm(22/0.3) PVC unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm TW switch box in flush with wall with 3 mm thick hylem sheet cover for 5 A 3 pin flush type non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point (SD 39 ) including cost of all mateials, lead, lift, etc., complete.

Supply and fixing of 4' 40 W LED type flu. fitting complete with Electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. (SD 87)

Supply and fixing of 4' 40 W Twin type Mirror optic suspension fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. (SD 91)

Supply and fixing of CFL bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 100 W bulb. (SD81)

Supplying and fixing of 2 x 36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete,as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB Distribution board in sheet enclosure with 40A 4 Pole MCB isolator as incoming and 12 nos 6A to 32 A SP MCB out going in flush with wall and making good of the concealed portion including cost of all materials all lead lift etc complete.

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD111)

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD 116)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.(SD 228)

Supplying and fixing of 4 Pole 32 Amps Isolater 1 No with MCB box 4 Pole including terminal block for testing purpose at relay and CC room including cost of all materilas, lead, lift etc., complete.

Supplying and fixing in position of best quality mirror (22'' x16) with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc., complete as directed by the engineer at site.

Supply and fixing of approved quality of alumium towel rod with powder coating of size (2 ft) and fixing the same over teak week round block and soap tray (PVC) in bath room including cost of all mterials lead lift labour etc., complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc.,complete.

Supplying and fixing of 110mm dia PVC Slotted pipe for dispersion trench with covering with roof pantiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supply and fixing of MS grill for Windows and ventilators incluidng the cost of fabrication,transporting, lead, lift, etc., complete.

Supplying and filling of stone chips 12 mm to 20 mm HBG metal with required thick all lead and lift including and all other T&P etc., complete.

Supplying and filling of stone dust with required thick all lead and lift including and all other T&P etc., complete.

Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm)with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.

Filling the M-sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification (watering & consolidation with all leads and lifts etc., complete.

Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.

Supply ,cutting ,Fabrication ,of Chequered plate 6 mm thick ,with lifting hooks / holes and placing over cableduct inside control room building ,painting with one coat red oxide ,two coats enamel paint ,labour for laying including cost of all materials ,leads and lifts etc. complete.as directed by dept.Engineer at site

Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm with cover slab including cost of all materials, transport to site, labour, lead, lift, etc., complete as per standard specification.

Wiring with 2 x 2.5 SQ mm PVC unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm TW switch box in flush with wall with 3 mm thick hylem sheet cover for 15 A 3 pin flush type non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point (SD 39 ) including cost of all mateials, lead, lift, etc., complete.

Refilling the excavated earth other than sand in basement sides and including cost of all labour, lead, lift, etc complete.

Engraving the month and year of construction in the plinth of the building including cost of granite stone labour fixing charges etc complete.

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. RS Joist 200 X 100 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS CHANNEL 125 X 65 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS CHANNEL 100 X 50 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS ANGLE 100 x 100 x 8 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS ANGLE 50 X 50 X 6 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS FLAT 65 X 10 (Eathmat only)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS FLAT 50 X 8 ( Including L.section)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS ROD 40 mm (Including Earth rod)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. MS/RTS ROD 20 mm (Including I-bolt)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. Chequred plate 6 mm

Transporting of Iron & Steel items from various steel yard at chennai ( to Eachampadi 280 Kms).,including loading and unloading charges.

SUPPLY OF POWER CONNECTORS 4 Bolt Tension fitting for Zebra

SUPPLY OF POWER CONNECTORS " T " Clamp for Zebra to Zebra

SUPPLY OF POWER CONNECTORS " T " Clamp for Zebra to 2" B/B

SUPPLY OF POWER CONNECTORS Switch end clamp for Zebra

SUPPLY OF POWER CONNECTORS PG Clamp for Zebra

SUPPLY OF POWER CONNECTORS Free end Clamp for 2" Bus Bar

SUPPLY OF POWER CONNECTORS Corona Bell for 2" Bus Bar

SUPPLY OF POWER CONNECTORS - L clamp for Zebra

SUPPLY OF POWER CONNECTORS - Switch end clamp for Mink

SUPPLY OF POWER CONNECTORS - Switch end clamp for 2" Bus Bar

Supply of Yard light poles and Fittings 8.0 Mtr long stepped tubular pole for yard light

Supply of Yard light poles and Fittings 72 Watts LED lamp with fitting

Supply and fixing of fire fighting equipments as per norms : Rubbermat of size 2000X1000X10mm

Labour, Machineries, consumables for Fabrication of Heavy section without Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Heavy section with Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Light section (Sectional weight below 14 Kg/Mtr)

Labour for Erection of Structure Heavy section (Sectional weight 14 Kg/Mtr and above)

Labour for Erection of Structure Light section (Sectional weight below 14 Kg/Mtr)

Labour for rust removing, cleaning painting of first primer coat (Red oxide) of all sections including cost of paint, brush & consumables

Labour for rust removing, cleaning painting (Aluminium) of first finishing coat of all sections including cost of paint, brush & consumables

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint, brush & consumables

Labour for Erection of 33/22 KV breaker with own crane arrangement and connecting link rod, SF6 gas filling and other consumables including support poles cutting, jointing, providing holes and bending of pipes whereever required and as directed by the field engineer

Labour for erection of 33/22/11 KV Measurement Transformer using manual labour or crane own arrangement (one S Ph or 3 Ph unit ) including providing holes wherever required as directed by the field engineer.

Labour for erection of CT/PT junction box including fabrication of clamp.

Labour for erection of 11KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of 11KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer. (LC WORK INVOLVED)

Labour for erection of LAS Distribution type single pole stack 33/11KV including fabrication of base if necessary

Labour for erection of Insulators single pole stack 22/11 KV

Labour for erection of strung bus of 11/33KV Single Zebra Conductor (1 span = 3 runs) including hoisting of insulator (LC WORK INVOLVED)

Labour for erection of Busbar including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer. Using 50mm bus bar of length (without making bends)

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer. (LC WORK INVOLVED)

Labour for Erection of Simplex Panel including alignment and earthing as directed by field engineer

Labour for erection of cable in duct / trench including cost of Alu.tag for identification Upto 8 core

Labour for erection of cable and clamping in structures including fabrication of clamps and fixing at uniform intervals as directed by field Engineer Upto 8 core

Labour for erection of yard light pole including laying of cable inside the pole

Labour for erection of LED lamp 72 W fitting with fixture and fuse box including wiring and testing for burning condition; including the cost of 15 amps 2way strip connector and other consumables

Labour for loading of unloading nonfragile materials without using board crane (one operation)

Labour for loading or unloading of fragile materials without using board crane (one operation)

Labour machineries, consumables for fabrication of earth electrode 10mtr / 6 mtr length or as directed by the field Engineer

Labour machineries, consumables for fabrication & erection of earth spikes

Labour machineries and consumables for erection of earthmat & earth raisers as directed by the field Engineer at site

Providing 150mm dia bore to a depth of 9 mtrs for earth electrode and labour for fabrication and erection of earth electrode in to the bore and filling with red soil, A4 grade bentonite powder, coal powder with 5% common salt mixed with available site clay soil with water 5 Kg/meter depth in earth bore and pouring water and tightening of earth bore upto satisfactory earth and supply of identification board of size 300x150mm of 14swg and lettering and 12mm M.S. Rod to be fixed to the board.

Labour for excavation and refilling of soil for earth mat

Labour charges for painting of earth raisers by green enamel paint and where ever required including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables as directed by th field Engineer.

Supply and provision of 600 mm mean dia 300 mm height, 36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coats of colour wash as directed by the field engineer

Labour charges for fabrication of bolt of required length out of 16 to 25 mm dia G I rod including the cost of GI rod and 2 Nos. G I Nuts & washer as directed by field Engineer

Supply and provision of M5,M10,M12 & M16 (full thread ) G.I. Bolt, Nuts & GI washer of various size for erection of AB Switch and Insulators or any other purpose wherever necessary and as required and as directed by field Engineer

Fabrication, supply and fitting of CT / PT Junction box of size 400 W X 150 D X 300 H made out of 14 SWG (2mm) M.S. Sheet with 16 Nos. termination of stand type with two nuts and washers suitable for 4 Sqmm copper cable and 5 Nos. 1" gland wherever required as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials

Fabrication, Supply and mounting of yard light box of size 200 W X 200 H X 150 D mm out of 18 SWG (1.2mm) M.S Sheet with cable entry holes, fixing arrangements for fuse units and mounting clamps with 1 no. 5 amps porceline rewirable carrier as directed by the field Engineer including cost of all materials

Labour Charges for removing rust,primer coat, first and second coat painting both sides and writing details in M.S. Boards, R S Joist & Yard light pole etc., including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables as directed by th field Engineer.

Supply and erection of B-class GI pipe for extension of tandom / down pipe for AB switches and for any other work as required by as directed by field Engineer including cost of GI Pipe of 40 mm dia

Supply and fixing of ISI mark Bakelite/ HRC Rewirable fuse holders in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer 16 Amps.

Supply and fixing of ISI mark Bakelite/ HRC Rewirable fuse holders in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer 63 Amps.

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer - 2/5/10 Amps

Supply and fixing of mounting channel suitable for CBTM 5 terminal block in Panel / Box as required and directed by the field Engineer.

Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 19 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 25 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 32 mm

Labour for provision of cable end gland

Supply and termination of cable core ends including the cost of cable socket (lug) ferrules, Aluminium tag straps etc., as per cable schedule and as directed by the field engineer

Supply and fixing of Godrej 6 lever navtol lock with triplicate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer

Supply and fabrication of sand drum made out of oil drum of size 580 mm dia x 420 mm height with conical cover made of tin sheet provided with handle incluidng cost of barrel, sand, tin sheet & other materials

Supply and provision of 12 / 25 X 3 mm flexible braided copper tape / rope for interlinking panel earthing and for any other purpose on any sizes including the cost of suitable copper lugs for criping of at both ends etc.as directed by field Engineer.

Fabrication, supply and fixing of equipment board of various size and fire stand etc as per drawing and as directed by the field Engineer including cost of all materials

Supply & provision of 2.5 Sq.mm multi stand /single core flexble Finolex / Indo cable for panel wiring work / for any other purpose as directed by the field Engineer.

Labour charges for writing details in finished surfaces boards including cost of enamul paint(Dules, Asian, Berger preferred) and other consumables as directed by the field Engineer.

Supply and fixing of wooden board 25mm / Hylam sheet of 10mm thickness for fixing fuse units wherever required as directed by the field Engineer

Labour charges for drawing layout and writing details in LC / Keyboard including cost of enamel paint (Dules, Asian, Berger preferred) and other consumables as directed by the field Engineer.

Labour, tools for charging of battery of 110V DC 120AH

Labour for erection of battery including assembly of wooden stand, painting of acid proof paint

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

Ashok.S