Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.5 L+₹15,888 (0.78%)Rejected-Finance HOUSE NO 6 18 WARD NO 05 HOUSING BOARD COLONY HANUMANGARH JN 335512 RAJ | HANUMANGARH | RAJASTHAN | 335512 | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹20.8 L+₹50,546.50 (2.49%)Rejected-Finance NEAR GAYRTI TEMPLE PURANI GINANI BIKANER | BIKANER | BIKANER | RAJASTHAN | L3 | Rejected-Finance Highest bid quoted other then L1 | |
| 4 | L4₹21.4 L+₹1.0 L (5.11%)Rejected-Finance | L4 | Rejected-Finance Highest bid quoted other then L1 | |
| 5 | L5₹21.8 L+₹1.4 L (7.13%)Rejected-Finance | L5 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹54,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri Ganganagar Cantt Rajasthan-335001
COMPREHENCIVE REPAIR WORK TO OTM ACCN OF ZONE B AT MILITARY STATION SRI GANGANAGAR
2022_MES_536810_1
GE SGNR/ TOK-24 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE Sri Ganganagar
D Class a(i) for un-enlisted, refer NIT para 8.
6 documents required · 6 mandatory
₹500
GE Sri Ganganagar
₹54,000
Yes
14 Sept 2022
9 Jul 2022
9 Aug 2022
9 Jul 2022
6 Aug 2022
16 Jul 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.
Demolition of cement Concrete(un-renforced) in ground floors and pavings exc 15 cm thickness above ground level complete all as specified and directed by Engineer - in - Charge.
M&L glazed ceramic coloured tiles grade, (300x450)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L for 25 mm thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floor laid in pattern with two or more coloured tiles combination design as approved concept to match the concept of wall ceramic tiles etc set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fairand pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 5.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.
M&L for vitrified ceremic tiles light shade 10 mm thick (square / rectangular) area of each tile not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & faircomplete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 7.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.
M&L machine cut Kota stone slab flooring 20 mm thick over 15 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing and polishing complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No.9.0 here in before but on vertical surfaces over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in - Charge.
M&L 20 mm thick Green marble/Makrana white machine cut in skirting/dado, shelves etc laid over 10 mm thick cement mortar 1:4 screed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing polishing all as specified and directed by Engr-in-charge.
M&L for granite (of any type) tiles 20 mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in CM 1:4 etc all as specified and directed by Engineer in charge.
All as per Srl item No. 12.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:3 finished even and fair, complete all as specified and directed by Engineer - in - Charge.
S&F in repairs fency type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer in charge.
S&F in repair 15 mm dia fancy type chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed.
S&F in repairs, stop valves, cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer - in - Charge.
S&F in repairs, stop valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe orcomplete all as specified and directed by Engineer - in - Charge.
Dismantling water tank capacity exc 250 Ltr and n exc 1000 ltr complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polyethylene water storage tank 500 ltrs capacity three layered White colour (Cylindrical vertical with closed top) hoisted and fixed in position and including 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered White colour (Cylindrical vertical with closed top) hoisted and fixed in position and including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge.
S&F in repairs 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engineer - in - Charge.
S&F in repairs 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge.
Dismantling cast iron pipe of any dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
S&F 100mm bore cast iron 'Y' tee sand cast fitted with oval access door complete all as specified and directed by Engineer - in - Charge.
M&L for CI floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Engr-in-charge.
M&L for CI floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Engr-in-charge.
Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in - Charge.
M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 all as specified and directed by Engr-in-charge.
S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in - Charge.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer - in - Charge.
S & F in repair Aluminium anodised tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.
S&F water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI 'P' trap/S trap all as specified and directed by Engr-in-charge.
S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.
S&F, in repair vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 m long) complete, including 15mm cast copper alloy chromium plated pillar taps and 15mm bore 450 mm length PVC connection with PTMT nuts.complete all as specified and directed by Engineer - in - Charge.
S & F in repairs waste couplings of PTMT (half or full threaded) of 40 mm complete all as specified and directed by Engineer in charge.
S&F in repairs low density polyethylene pipes (LDPE) 32 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge.
S&F in repairs low density polyethylene pipes (LDPE) 40 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge.
S&F in floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge.
Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.
Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 48 here in before but fixing only with new fittings only complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 50 here in before but fixing only with new fittings only complete all as specified and directed by Engineer - in - Charge.
S&F in repairs,fency types bib taps,15 mm cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed by Engineer - in - Charge.
S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer in charge.
S&F in repair vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap complete all as specified and directed by Engineer - in - Charge.
S&F in repairs chromium plated shower rose of any colour with or without swivel joints 125mm size including shower arm complete all as specified & directed by Engineer in charge.
S&F in repairs Stainless steel soap dish of any size fixed with screws complete all as specified and directed by Engineer in charge.
S&F in repairs grating doom 100 mm dia of stainless steel with and without hole complete all as specified and directed by Engineer vin charge.
S&F in repairs vitreous china urinals, bowl type flat back size of 465*355*265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Engg in charge.
Taking down shutters exc 1 sqm but n.exc 2sqm of any description & after repairing refixing in same opening complete all as specified & directed by Engineer in charge.
Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in - Charge.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.
S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge
S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engineer - in - Charge.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.
S&F Aluminum Grill any pattern aperture size 75X75 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed by Engineer - in - Charge. .Note- Aluminum frame shall be Measured and paid seperately
S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 105x60mm complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No.84 here in before but size 125 x 60mm complete all as specified and directed by Engineer - in - Charge.
S&F 75 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as specified and directecd by Engr-in-charge.
S&F mild steel butt hinges “medium weight” 100mm long cold rolled mild steel complete all as specified and directed by Engineer - in - Charge.
Taking down steel window or ventilator any type with glazing bar all as specified and directed by Engr-in-charge.
S & F hasp and staple, safety type stove enameled black, of mild steel 100mm size complete all as specified and directed by Engineer - in - Charge.
M&L Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.
M & L for applying one coat of red oxide primer on new steel surface and aaplying two coats of synthetic enamel paint (ordinary tint) on steel surface over 10 cm width or girth, not otherwise described including preparation of of any description not otherwise described complete all as specified and directed by Engineer - in - Charge.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed by Engineer - in - Charge.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in - Charge.
M&L for mild steel work as in frame work/guard bar for door and window and as similar work including cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer - in - Charge.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in each pane of any size complete all as specified and directed by Engineer - in - Charge.
S&F in repairs 4 mm thick sheet glass ordinary quality and glazing with oil putty in each pane of any sizecomplete all as specified and directed by Engineer - in - Charge.
S&F in repairs 4 mm thick figured glass ordinary quality and glazing with oil putty in each pane of any sizecomplete all as specified and directed by Engineer - in - Charge.
S&F in repairs 5.5 mm thick sheet glass ordinary quality and glazing in each pane of any size complete all as specified and directed by Engineer - in - Charge.
M&L for welding of steel work & repairs to steel windows, handles, butt hinges, tower bolt and other steel work of any type & size complete all as specified and directed by Engineer in charge.
S&F in repairs mortice brass lock vertical type 4 levers size 100 mm complete all as specified and directed by Engineer in charge.
S&F in repairs Aluminium extruded body door closure hydraulically regulated, designation No 3 universal type suitable for door shutters of any size complete all as specified and directed by Engineer in charge.
S & F in repairs aluminium handles cast type anodised, 125mm long complete all as specified and directed by Engineer - in - Charge.
S & F in repairs aluminium handles cast type anodised, 100mm long complete all as specified and directed by Engineer - in - Charge.
S & F in repairs aluminium handles cast type anodised, 75mm long complete all as specified and directed by Engineer - in - Charge.
S& F in repairs aluminium anodised barrel tower bolts of extruded section and fixed 100 mm size complete all as specified & directed by Engineer in charge.
S&F in repairs 150mm Extruded aluminium alloy handles fabricated type complete all as specified and directed by Engineer - in - Charge.
S&F in repairs 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate 2 on staple plate complete all as specified and directed by Engineer - in - Charge.
S&F in repairs HDPE lid cover for water tank of capacity 500 Ltr & 1000 Ltr complete all as specified and directed by Engineer in charge.
S & F in repair stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.
S & F for 35mm thick gauged skelton shutters open rebated and prepared to receive gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beady for receiving gauze etc of 35mm thick and door for Iind class hard wood rail and style as specified in SSR Part-I Section 8, cluase 8.24(a) and all as specified and directed by Engr-in-Charge.
S & F for 35mm thick factory made IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.
M&L for preparation of surfaces of new wooden Surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer - in - Charge.
Demolition of cement Concrete(un-renforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.
M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in alternate bay n.exc 2.5m length including necessary formwork all as specified and directed by engr-in-charge.
M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in sub base of floor complete all as specified and directed by Engineer - in - Charge.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.
M&L for Machine pressed precast concrete interlocking paver block any shape and sze confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified.
Dimolition of Brick tiles or terracing tiles , single layer on roofs complete all as specified and directed.
Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plaster complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B2(20 mm graded aggregate) as in roof padding/mass concrete complete all as specified and directed by Engineer in chgarge.
M&L for Water proofing treatment to RCC sunken slab and adjoining vertical surfaces as per any of the following method complete all as specified and directed by Engineer - in - Charge. Method1 (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproffing coating. Smart care Damp proof 2k, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified motor of 1:1:4 (1 cement: 1polymer : 4 sand). Making Gola of size 75x75 at junction of vertical & horizontal with the polymer modified motor of 1:1:4 (1 cement: 1polymer : 4 sand). The coating shall be terminated at 300 mm on vertical walls. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc complete as per manufactures specifications (B) Bore packing: All the borehole gaps between concrete surface and pvc pipe of verious dia upto the neck level shall be filled with nonshrink free flow grout-Smart Care GP Grout or approved equivalent having dual shrinkage compensation property. Before the bore packing, surface of the pvc pipe and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (C) Apply 12-15mm plaster on slab and vertical surface admixed with smart care Vitalia Neo@200ml per bag of cement. Method 2 ( A) Supplying and applying two component elastomeric & acrylic flexible waterproffing coating. two coats with 1mm DFT, having Hydrostatic (postive) wate pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sgm with a paint brush over existing roof surface. The polyester reinforced coated net 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k or equivalent. After removel of all lose materials like dust etc with wire brush coir brushes from roof surface to get absolutelt cleaned surface free of foreign contaminant filling of crack and patches with polymer based repair motor/micro concrete, after the repairing work making the gola on surrounding wall's junction and seal the verical walls up to 300mm. In case of core cutting on the surface, the joint is seal with nonshrink grout. (B) Apply 12-15mm plaster on slab and vertical surface admixed with Dr Fixit Pidiproof LW+@200ml per bag of cement. Note:- (i) work shall be executed through specialized agency (ii) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer as per manufacturer instructions. The name of firm shall be got approved from GE before carrying out the work (iii) The plan area of floor shall be considered for payment.(iv) PCC filling under sunken area will be measured & paid separately Make: Method 1 (Asianpaint)/ Method 2 (Dr fixit) or Techno commercial equivalent in Sika/STP/Fosroc
M&L for lime Concrete as in roof padding/mass concrete complete all as specified and directed by Engineer in chgarge.
M&L for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of cruide oil by weight of cement complete all as specified and directed by Engineer - in - Charge.
Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified directed by Engr-in-Charge.
M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed by Engr-in-Charge.
M&L two coat of distemper oil emulsion on newly pastered wall surfaces over one coat of chalk whiting including preparation of surfaces complete all as specified and directed by Engineer in charge.
M&L three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of cement base paint over and including a coat of white wash on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M & L two coat of distemper oil emulsion on old decorated plastered wall surface with complete removal of existing treatment of walls removing all dirt and dust by watering making surface even and smooth including preparation of surfaces by applying one coat of wall care putty complete all as specified and directed by Engineer - in - Charge
M&L two coat of distemper oil emulsion on old decorated surfaces of ceiling including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed by Engr-in-Charge.
M&L one coat of cement base paint on old decorated surfaces of walls including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed by Engr-in-Charge.
S & F of Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directed by Engineer - in - Charge.
S & F of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engineer - in - Charge.
S& F Ball Bearing for rolling shutters complete all as specified and directed by Engineer - in - Charge.
M&L for repairing of rolling shutter area exc 5.0sqm but n.exc 10.0sqm including replacement of damaged part of shutter like ball bearing, top cover anchoring rod, hasp and staples complete all as specified and directed by Engr-in-charge.
M&L for repairing of rolling shutter area n.exc 5.0sqm including replacement of damaged part of shutter like ball bearing, top cover anchoring rod, hasp and staples complete all as specified and directed by Engr-in-charge.
S & F in repairs 18/19mm thick block Board, 2 quality interior grade, commercial type, fixed with screws to timber framwork complete all as specified and directed by Engr-in-charge.
S&F for Rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc. conforming to Fe-290 grade E-165 complete all as specified and directed by Engineer - in - Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer - in - Charge.
Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings complete all as specified and directed by Engineer - in - Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet (ridge) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer - in - Charge.
M&L two coats of synthetic enamel over a coat of red oxide primer exc 10 cm width /girth on new steel surfaces including preparation of surfaces complete all as specified and directed by Engineer - in - Charge.
S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engineer - in - Charge.
M & L for pre-cast RCC pillar/post for maharaja jallies (Jafri) type B-0 using 12.50mm graded crushed stone aggregate and set in cement mortar 1:4 including removing old broken pillar all as specified and directed by Engr-in-charge.
M&L for pre-cast RCC jallies(Jafri)/maharaja jallies 25mm thick type B-0 using 12.50mm graded crushed stone aggregate and set in cement mortar 1:4 including taking down old broken rcc jallies all as specified and directed by Engr-in-charge.
S&F in repair fancy type SS curtain rod 25 mm dia with brackets knob rings(20 cm c/c) etc all as specified and directed by Engr-in-charge.
S&F in repair MS peg stay for steel window, size 300mm with hinged joint and two plates, with studs complete all as specified and directed by Engr-in-charge.
S&F in repair MS handle for steel window, with left-right combination complete all as specified and directed by Engr-in-charge.
Disconnecting existing tanks exc 500 ltr but n.exc 1000 ltrs, setting aside (or lowering of required) for repairs or cleaning and hoisting, reconnecting and refixing in position including Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engr-in-charge.
Note : Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
R B Infrabuilders
M/S KARNI CONSTRUCTION COMPANY
J and P CONTRACTOR
Aggarwal brothers and company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .