SPECIAL REPAIRS TO BLDG NO T-174, T-435, JCOS MESS COOK HOUSE AND DINING HALL AND PROVN OF DRAINAGE SYSTEM FROM GARUD VIHAR OR MD ACCN TO INFANTRY CHOWK AT GRC KAMPTEE.

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including dismantling of ceiling fan, tube light, cable and refixing at same place cover fillets complete all as specified and directed.

S&F Gl frame work of grid size 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F hangers 6mm dia G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M&L for 4mm thick Non asbestos fibre cement building designer boards fixed or laid/ inserted to timber/ GI/ Aluminium framework fixed in ceiling, flat or sloping complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutter from the frames) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down cement plaster, any desription on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces using water proofing liquid compound as per manufacturer's instructions and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Dismantling of brick work or stone/ boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new surfaces or unplastered surface of wall & applying two coats of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of existing old decorated plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of existing old decorated plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of existing old decorated plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, but not backing removing serviceable tiles to store and rubbish off the premises up to 1 KM complete all as specified and directed.

M&L for light shade, coloured, vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over 15mm thick screed base in CM 1:4 complete all as specified and directed.

All as per item No 18 above but on dados surfaces including 10mm thick backing coat in CM 1:4 finished even and fair complete all as specified and directed.

M&L for coloured tiles in vertical surface of size 300mm x 450mm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 10mm thick backing coat in CM 1:4 finished even and fair complete all as specified and directed.

M&L for coloured ceramic tiles 7 to 8mm thick, area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm each in floors etc, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-22mm thick, over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of mortar 20mm thick in cement mortar 1:6 complete all as specified and directed.

M&L kota stone slab 15-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick rendering in cement mortar 1:4, on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in PCC path and similar works complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for chequered rubber moulded, cement concrete tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed in grey cement and pigment and fixed with cement slurry in floors complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) as in coping, haunching, rounded or chamfered on edges including necessary from work complete all as specified and directed.

Dismantling of water tanks and removing to store of capacity exc. 250 ltrs & not exc. 500 ltrs complete all as specified and directed.

Supply, Hoist and fix in position rotational molded polyethylene water storage tanks (cylindrical with closed top) of capacity 500 ltrs complete all as specified and directed.

S&F in repair 20mm dia PTMT float valve, high pressure with polythene float and flynut complete, screwed for iron pipe etc complete all as specified and directed.

S&F in repair gun metal gate valve of 20mm dia with iron wheel, screwed both ends for iron pipe complete all as specified and directed.

Taking up or down steel tubing and connection of 15mm bore complete all as specified and directed.

All as per item No 32 above but 20mm bore complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed to wall/ ceiling or laid in floors complete all as specified and directed.

S&F CI Nahani trap 75mm dia with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and directed.

Supply only low density PVC pipe 32/40 mm dia as in waste pipe to sink complete all as specified and directed.

S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F15mm dore stop valves, cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, swan Neck, with or without lattered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surafces of any description over 10cm width or girth & applying one coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new steel surafces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of 2nd class hard wood, rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces, the size of rail and style as per IS 1083 (part-I) kiln seasoned and chemically pressure treated of any number of panel complete all as specified and directed.

M&L for second class hardwood (SAL) plain, solid, straight chowkat and frame, wrought framed rebated on the solid rounded, chamfered, put together with glue pinned at joint complete all as specified and directed.

M&L for 30mm thick second class hard wood glazed and skeleton shutters with sash bars, open rebated & prepared to receive glass/wiremesh as specified in SSR Part-I section 8, clause 8.20 (b) complete all as specified and directed.

M&L for two coats of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 410-O or Fe 310-0 complete all as specified and directed.

M&L for mild steel 25 x 5mm flat iron for hold fast complete confirming to Fe-410-O etc complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 125mm extruded aluminium handles, fabricated type, anodised etc complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

Hacking out old broken glass of any thickness, size and quality from wooden/steel frames etc complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazed with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished complete all as specified and directed. Note:- Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

Forming 12mm thick expansion joint with pre-formed filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ as specified for thickness of concrete complete all as specified and directed.

M&L for 20 mm thick pre-polished granite slab, machine cut of any shade as approved by GE, including necessary notching, chamfering the edges over cement screed bed including cutting, grinding and mirror polishing (Granite finish) with suitable grinding stones complete all as specified and directed.

M&L for rounding to edges of stone slabs, one edge such as in steps, cooking platforms, and other similar situations complete all as specified and directed.

S&F steel window with side hung shutters (glaze & gauze shutter) including projecting or box type hinges with steel handle peg stay and divided into square without glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc complete all as specified and directed.

Removing building materials to a distance of 100m or under, beyond the lead including loading, unloading and stacking at the destination complete all as specified and directed.

S&F 10mm thick toughed sheet glass, hatches, figured quality and glazing plain/tinted with rubber gasket in squares exceeding 0.5 Sqm in each pane, including fixing arrangements hinges, 30cm long stainless steel handle in each pair and pivoted spring as per requirement complete all as specified and directed.

M&L for floor door spring, hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc complete all as specified and directed.

S&F drapery curtain roads with brackets, 20-25mm bore, cut to length as required complete all as specified and directed.

S&F for 18/19mm thick prelaminated particle board, interior grade, both side decorative choice laminations fixed timber frame work with 2mm PVC beading at edges complete all as specified and directed.

S&F piano hinges, mild steel, bright finish or elctrogalvanised and width of flaps 40mm complete all as specified and directed.

S&F 75mm size aluminium alloy, anodised, hasp & staple, safety type size complete all as specified and directed.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilators, opneble or sliding any type etc wih one or more rebates including necessary jointing cleats for fixing etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc in any type of soil etc complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix, as in foundation, footings, raft, ground floor & plinth beams using graded stone aggregate complete all as specified and directed.

M&L for RCC M-25 design mix in walls, using graded stone aggregate complete all as specified and directed.

M&L for mild steel TMT bar 10mm dia and over, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bar 8mm dia as in stirrups and distribution bar, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, rough finished surface of concrete etc.; vertical or to batter complete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement for surfaces of Area Drain complete all as specified and directed.

M&L for reinforced concrete pipes, class NP-2, laid and jointed with collars of 600mm bore of pipe complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layer not exc. 25 cm in soft/ loose soil complete all as specified and directed.

Removing excavated material to a distance exc 500m but not exc 1.5 km and deposited where directed at a level not exc 1.5 mtr above the starting point as in soils complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point, fan & socket, light and power complete including light fittings any type, switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc and makinggood to the disturbed surfaces of walls / floor etc to match with existing surfaces including white washing / colour washing / distemper to match with existing wall / floor / ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure, MCB, DB, main switch etc and making good to disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/capacity and making good to disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated & unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marking medium grade concealed in wall / ceilling including FRLSH PVC insulated unsheathed earth wire with copper conductor of size 1.50 sqmm pressed steel terminal modular boxes sunk on wall for mounting of switches switch sockets fan regulator etc including modular white cover plate suitable for mounting modular switches, sockets, fan regulator etc complete all as specified and making good to distrubed surfaces for one light point controlled by one, one way switch. Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, cieling roses and holders shall be connected to common earth dolly.

All as per item No 89 above but one ceiling /exhaust/ wall mounted fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 89 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 89 above but one 3 pin 5 amp socket out point on independent board complete all as specified and directed.

All as per item No 89 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with 1100 volt grade two single core FR PVC insulated unsheathed stranded copper conductor cable 2x4 sqmm with and inculding 1x4 sqmm copper conductor earth continuity wire drawing in, concealed in wall and including electrical grade non metallic rigid PVC conduit not less than 20mm dia, medium grade conealed in wall / ceiling as per site rquirement complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, tee, elbow shall be of same make.

S&F switch, modular type, single pole, one way, 6 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F switch, modular type, single pole, one way, 16 amp, 1 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F socket, modular type, single pole, one way, 6/16 amp, 2/3 pin, 3 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F socket, modular type, single pole, one way, 6 amp, 3 pin combined, 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F modular fan step regulator, 120 watt, 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG Cat part No LCTLN-20-CDL / Bajaj cat part No BLTRU 20W NW VIVA / Philips cat part No BN150W LED20S-6500 PSE OD GR.

S&F LED light fitting 9W LED bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable of suitable size of 230V, 50 Hz complete all as specified and directed. Make:- CG Cat part No LBHP-10-CDL or equivalent in Philips / Luker.

S&F energy efficient surface mounted 2'x2' grid ceiling LED fitting 36/40 watt, rated voltage 240V, 50Hz combination with profiled and flat diffuse complete all as specified and directed. Make:- CG Cat part No CCR-127-26-57-SL-NWH or equivalent in Philips / Luker.

S&F building security light LED 25W with lumen output 1800 with driver with rated voltage 240V, 50Hz including mounting GI, made out of 25mm dia light grade pipe 0.8m bent to shape including FI clamps, nut bolts etc complete all as specified and directed. Make:- Philips Cat part No BRP020, Luker Cat part No LST24 WH, CG Cat part No LSTS-25-CDL.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt, 40 to 60 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB single pole and neutral 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

M&L for earthing complete with galvanised steet earth plate electrode 600 x 600 x 6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminium lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe upto 7.50 metre long for protection of earthing lead. (f) Reguisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.18,107.00]

NORTH INDIA PEST CONTROL

M/s Jagdish Staioners and General Stores

M/s DS Khekde

SHUB CONSTRUTION

M/s B S Jain

M/s M.G. Hargunani

Bidder Name

M/S J.A CHAWHAN

SHUB CONSTRUTION

M/s B S Jain

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL