REPAIR TO JOINERY, ROOF TREATMENT, FLOOR WALL TILING, STONE GRIT, WALL CLADDING, PLASTERING, PAINTING AND MISC WORK IN TECH AREA AT ADRDE AGRA UNDER GE (I) RND DELHI

Amount

Taking down cement plaster on brick/ stone walls etc of any description incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM1:6, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick/concrete surfaces in CM 1:4 mixed with WPC as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. NOTE : WPC shall be measured and paid separately.

M&L for rendering 10mm thick on concrete surfaces of ceiling in CM 1:3, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of newly plastered ceiling surface and applying 3 coats of white wash complete all as specified and directed.

M&L for complete removal of the existing treatment on wall and applying two coats of oil bound distemper over & including 2mm thick wall care putty (1mm thick each coat) complete all as specified and directed.

M&L for prepartion of new plastered surface walls and applying two coats of oil bound distemper over & including 2mm thick wall care putty (1mm thick each coat) complete all as specified and directed.

M&L for aperparation of new plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of white wash on old decorated surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of Exterior emulsion paint complete all as specified and directed.

M&L for two coats of wall care putty (1mm thick each coat ) on wall to obtain smooth surface including making good any undulations on new/old wall surface on walls complete all as specified and directed.

M&L for preparation of old painted wood and wood based surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel or iron surface and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

S&F in repair mild steel work as in framed brakets of angles or tees with web and flanges out to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc n.exc. 10 Kg each bracket conforming to Fe-410 or FE-310-0 complete all as specified and directed.

M&L for 40 mm thick sand stone slabs in shades, Chajjas, shelves etc. n.exc 2m length, punched dressed on face and along exposed edges self faced on other side, set in & including 15mm thick CM 1:4 and pointed in CM 1:2 complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth (Brick walls) complete all as specified and directed.

M&L for 25 to 30 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone area not exceeding 0.25 sqm fixed with and including, making V groove at top & bottom of stone and drilling holes for hold fastener, polishing, rubbing & including silicon treatment set in & including 15mm thick CM 1:4 complete all as specified and directed.

Refastening and securing ends of balusters, newels, rag bolts etc, let into stone and grouted in cement mortar including resecuring the mortices and regrouting in cement mortar complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any descriptions exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed panelled shutter (any number of panels), with lock rail and panel of 12mm thick BWP veneered particle board with commercial veneering on both faces. The sizes of rails and stiles as per IS:1003 (Part -I) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

M&L for factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown in SSR complete all as specified and directed.

S&F factory made PVC door frames of size 50mmx47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition compete all as specified and directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled stainless steel, and fixed complete all as specified and directed.

S&F 300 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

S&F 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

S&F in repairs 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

All as per item ser No 32 above but 150 mm size.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium handles, fabricated type, D shape, anodized and fixed complete all as specified and directed.

S&F in repairs150mm long aluminium handles, fabricated type, D shape, anodized and fixed complete all as specified and directed.

S&F 140mm long floor door stopper aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs140mm long floor door stopper aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs door closer aluminium (die cast) body hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 1000 mm in width and of weight 61 to 80 Kgs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips providing and fixing new ones complete all as specified and directed.

S&F 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane complete all as specified and directed.

S&F 4.8mm thick Sheet glass ordinary quality and glazing with oil putty in square exe 0.5 sq m in each pane complete all as specified and directed.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description,over 10cm in width or girth complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base of floor.

M&L for 100mm thick PCC 1:2:4, type B-1 (20mm graded stone aggregate) including necessary form work as in path, passages, etc, surface finished even & fair, Spike rolling the surface or making impressions of expanded metal while the concrete is green complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200x7-8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Coloured Chequered cement concrete tiles 25cm x 25cm x 22mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick or concrete tile (laid flat or on edge) laid in floor, channel, kerb, apron etc. laid dry complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid in in floors complete all as specified and directed.

M&L for sand filling under floor including spreading, levelling, watering etc. complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

All as per item No. 57 above but on vertical surfaces over & including 10 mm thick rendering in CM 1:4

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like over and including 20mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for Kota stone slab flooring 20-25mm thick over laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick rendeing in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aporans etc complete all as specified and directed.

M&L 40mm thick brick tiles laid over 15mm thick screed bed in CM 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M&L for screed bed 10mm thick in CM 1:4 Mixed with water profing compound @ 3% by weight of cement or as per manufacturer's instruction complete all as specified and directed.

M&L for Water proofing treatment over roof at any height consisting evenly applied bitumen primer coat @ 0.30 litre/ Sqm on surfaces,Applying evenly a tack coat of bitumen @1.20 Kg /Sqm and a layer of APP polymer 3 mm thick membrane weight not less than 3.00 Kg/ Sqm duly sealed at over laps joints with flame (complete by torch application) again applying a coat of bitumen @1.20 Kg /Sqm on the top of APP all as per manufacturer's instructions, complete all as specified and directed. Notes:- (i) Application of polymeric membrane shall be by torch application. (ii) The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (iii) Primer shall be applied after preparing & cleaning of fully dried cement plastered surface.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping,coving, padding bed plates or mass concrete etc. complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

All as per item ser No. 66 above but 20mm dia.

All as per item ser No. 66 above but 25mm dia.

S&F GI tube medium grade 15 mm bore with all fittings fixed to wall and ceilings or laid in floor complete all as specified and directed.

S&F GI tube medium grade 20 mm bore with all fittings fixed to wall and ceilings or laid in floor complete all as specified and directed.

S&F GI tube medium grade 25 mm bore with all fittings fixed to wall and ceilings or laid in floor complete all as specified and directed.

S&F 20mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm Stop valves cast copper alloy Chromium plated fancy type long shank concealed type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed ( minimum weight 15mm - 90gms) complete all as specified and directed.

S&F in repair 15mm stop valve of PTMT any colour high pressure screwed for iron pipe and fixed ( minimum weight 15mm - 90gms) complete all as specified and directed.

S & F in repairs Vitreous china squatting pan, Orissa pattern , size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including 110mm PVC (SWR) WC connector with lip ring and PVC (SWR) P/S trap 110mm complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet pan (Padastal pattern), white (excluding fixing bolt, etc.) complete all as specified and directed.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC low level flushing cistern valveless, syphonic action type of capacity 10 litre ISI marked complete with inlet ball valve,float and handle including mild steel bracket complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size 630x450mm excluding pillar tap etc. but including mild steel brackets complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type, white complete all as specified and directed.

S&F 40 mm bore low density polyethylene pipe of pressure rating 6Kgf/sqcm complete all as specified and directed.

S&F 32 mm bore low density polyethylene pipe with waste coupling for wash hand basin complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight - 120 gms) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 25mm bore weight 455 gms complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore weight 455 gms complete all as specified and directed.

S&F in repair Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F grating square 150mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F grating doom 150 mm dia with waste hole of PTMT. (Minimum weight 100 gms) complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 32mm waste coupling of PTMT (half or full threaded) minimum weight 45gms for urinals complete all as specified and directed.

S&F in repair bottle trap 32 mm bore of PTMT having minium water seal 25 mm weight 260 gms for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repairs PVC 75mm (SWR) floor trap, plane with grating including jointing with solvant cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

All as per item ser No. 98 above but 75mm bore.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' Old size bricks straight or corved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed.

Blank

Blank

M&L for Rotational moulded polyethylene water storage tank 500 litres capacity (cylindrical vertical with closed top) hoisted & fixed in position including dismantling old unserviceable water tank complete all as specified and directed.

All as per item No. 108 above but 1000 litres capacity.

S&F in repairs CP Health Faucet with 900mm long PVC connection 15 mm dia with brass sockets complete all as specified and directed.

S&F in repairs CP Jet spray with 900mm long PVC connection pipe 15 mm dia with brass sockets for europian water closet complete all as specified and directed.

S&F in repairs PVC connection 15mm bore with PTMT nuts of length 900mm complete all as specified and directed.

M/S RISHI RAJ AGRAWAL

M/S RADHEY GOVIND ENTERPRISES

kalraj engineers