Widening and Strengthening work of Agrapatti Mubarakpur Link road

Amount

Construction of embankment with approved material obtained from Right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Excluding cost of GST.

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location in near vicinity. Excluding cost of GST.

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. Excluding cost of GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. Excluding cost of GST. (Compaction only)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Excluding cost of GST.

Providing, laying, spreading and compacting graded stone aggregate to Stablised wet mix macadam specification including (Cement 1%+Emulsion-3.5%) premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and laying dense graded bituminous macadam with 100 TPH computerized HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. Excluding cost of GST.

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared granular surface cleaned with mechanical broom. Excluding cost of GST.

Providing and laying bituminous concrete with 100 TPH computerized hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. Excluding cost of GST.

Providing and Laying of Zig-Zag rubber moulded Interlocking Concret Block Pavement having thickness 80 mm as per drawing and Technical Specifiaction Clause 1504 of MORTH Specification.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the exca

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications

S/l of 63-45 mm stone ballast in apron (hand packed) & top finished inclg cost of material labour T&P etc complete

S/l of 350mm dia NP-3 H.P. culvert

S/l of 600mm dia NP-3 H.P. culvert

S/l of 900mm dia NP-3 H.P. culvert

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (RCC Grade M20)

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

M/S SURYA KANT MISHRA

M/s JAYSINGH

M/s Uma constractor

M/s Prabhakar Singh

M/s Y.P. Construction

M/S J.P. Construction

M/S MAA MUNDESHWARI CONSTRUCTION

M/s Prakash Construction

M/S NANDAN CONSTRUCTION