GE/TOKEN-46/2025-26 PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I, B/R-II AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Excavation in post holes ( or similar holes each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense soil.

Excavation in trenches, n exc 1.50 m wide and n exc 1.50 m in depth; for foundation, etc. or for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc, n exc 10 sqm on plan and n exc 1.50m in depth and getting out hard/ dense soil.

PCC (1:4:8) type D-2 using 40mm graded stone aggregate in fdn, filling/mass concrete.

S & F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. in posts and struts including cutting tops to shape as directed Fe-290(Gde E-165).

S&F MS Angle Iron as in rolled sections as in main and cross beams,hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates Fe410-W(Gde-E-250 quality-A).

M &L Brick work with sub class'B' bricks straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, complete, all as specified and as directed.

Rendering 10mm thick in CM 1:4 on fair faces of concrete surfaces finished even and smooth with out using extra cement all as specified.

M&L for two coat cement base paint over a coat of alkali resist priming paint including preparation of wall surface complete all as directed by Engineer-in-Charge.

S &F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.

M&L for 50mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate in paving surfaces including finishing surface even & smooth.

S&F, Mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of neck in 16 to 20mm all as specified and directed.

S&F, Mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 22.50 cm but not exceeding 30cm long and dia of shank 16 to 20mm all as specified and directed.

S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

1. M&L Supplying and laying of Precast U-Shape Strom water Drainhaving in to in dimension 450mm x 450mm of top thickness 50mm and bottom thickness of 70mm of 2000mm long each from T6 load carrying capacity-4.8Ton axel load and 2.4 T wheel load confirming to BIS/JIS having high performance self-compacting concrete M-40 cylindrical strength / M-50 Grade cube strength and Fe500/Fe550D reinforcement. The product should be manufactured in wet-cast method and dully steam cured for accelerated curing.The product shall have tie shape joint 10-20mm with 25mm depth groove as per BIS/JIS on both side of each storm water drain for jointing two precast storm water drains using cement mortar or suitable non shrink grout. The precast utility duct must consists of special in-built inlet at appropriate location for fixing de-shackle for mechanical installation, including supply transportation, installation of specific location at site in line, level, gradient and plumb with necessary testing commissioning etc complete all as specified and directed. 2. Contractor shall have MOU withPrecast/ Prefabricated manufacturer who has executed precast/ prefabricated building workstwo works with satisfactory performance. The contractor should have possessed Provident Fund Code Number and GST Registration Number. Only MES Enlisted contractor is eligible with MOU. complete all as specified and directed by eng in charge Note (i) including crain or hydra for laying drains (ii) Sample displayed at sample room.

Providing and fixing factory made pre caste High strength precast draine covers with hole, having concrete of strength not less than M-40, size 500 x 550 x 70 (mm), are varied as for site requirement , reinforeced with as per structural requirement TMT Grade Fe 500/550D,all as specified as per direction of eng in charge.

Surface excavation n exc 30 cm deep and averaging 20 cm deep and getting out all as specified.

M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc all as specified.

M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like all as specified.

M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for columns, pillars, piers, post and strut all as specified.

M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span all as specified.

M & L for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface all as specified.

M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc.for fair finished surface all as specified.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface all as specified.

M&L for mild steel TMT bars 10mm dia and over cut to length,bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as ser item no 27 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for 40 mm thick DPC on horizontal or vertical surfces in PCC 1:2:4 type B0 using 12.5mm graded stone agg incl all necessary form work and mixing of WPC (WPC shall be measured and shall paid seperately) .

M & L for hardcore of gauge n exc.63 mm(using broken stone or boulders) deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified.

M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.

M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:6 complete all as specified and as directed.

M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.

M & L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in plinth protection all as specified.

M& L for rendering 15 mm thick in CM 1 : 6 on other than fair faces of brick work or concrete surfaces etc finished fair and even without using extra cement all as specified.

M&L for rendering 15 mm thick in CM 1:4 on any faces of concrete or brick surfaces finished fair and even without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished even and smooth without using extra cement all as specified.

S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing.

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded section.

S & F 150 mm long extruded aluminum alloy handles fabricated type and anodised.

S & F cast iron soil, waste and vent pipes( sand cast pipes) 100 mm bore in any length with or without ears, with cement joint laid in trenches or in floors all as specified.

S & F bends 100 mm size dimnishing pieces or tapers (larger bore measured) all as specified.

S & F branch pieces 100 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches & with oval access doors all as specified.

S & F 75mm dia cast iron soil waste and vent pipe (ISI marked) sand cast, in any length with or without ears with cement joint complete fixed in floors and in any other places, complete all as specified.

S & F cast iron floor trap including jointing to waste pipe in run lead, dia of outlet 75mm, complete all as specified.

M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.

All as per item No 47 above but 20mm bore pipe.

S & F vitreous china white glazed european type WC with white ISI marked plastic seat cover and flush pipe complete all as specified.

Supply only PVC Low level flushing cistern 10 ltr capacity incl internal fittings, sypons, handle, bend etc complete(Make commander/cera/parryware) incl S&F 2 Nos CI brackets, waste pipe and coupling complete all as specified.

S & F pvc connection 15mm dia of standard pattern 600 mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified.

S&F in 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S & F brass CP angle valve 15 mm dia including connecting to PVC/CP connection complete all as specified.

S & F concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup. complete all as specified.

S&F rotational moulded polyethylene water storage tank double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I, 1000 Ltr capacity complete all as specified.

S&F 20 mm ball valve PTMT high pressure with polythene float and flynut complete screwed for iron pipe.all as specified

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.

M & L for applying two coat of cement base paint on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

S & F butt hinges medium weight stainless steel 100mm size complete all as specified.

S & F Vitreous china urinal partition white of size 310x700 mm and Urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (including necessary assoceries ) Vitreous China urinals, bowl type (back or corner wall type), urinal spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement. complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; ladders; framed balusters; walk ways; railings; framework of water tanks, roof truss and similar work con- forming to Fe.290.Gde-E-165.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for pre treating the bottom, top and sides of excavation prior to construction with anti termite treatment at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

S&F CP Brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified.

S&F Fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified.

S&F 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed, complete all as specified.

S&F Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified.

S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 80mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410-W (GdeE- 250) qualityA.

M & L for Non skid 600x600x8 to 10mm thick coloured ceramic tiles as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles.

M&L for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified.

M&L for Powder coated aluminium(minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up thegaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane.

M&L for PVC false ceilings 6mm are watertight, just like gypsum false ceilings, and are more effective and lasting in high moisture environments like balconies, bathrooms, and basements

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

Earth filling under floors including spreading and levelling in layers n. exc. 25cm thick and well ramming including watering complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old/new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening as per specification and drawing.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F butt hinges, 100mm medium weight, cold rolled mild steel.

S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.

S&F steel windows or steel ventilators fixed type with glazing bar complete.

M&L for 25mm th levelling course in Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L 50mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L chequered endura tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6

S&F PVC connection 450mm long 15mm dia complete all as specified and as directed.

M&L for PCC 1:2:4 B1, 20mm graded stone aggregate as in surface channels and drains

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.

Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified.

S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern fixing and connection to pipes complete all as directed.

S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified.

S & F in repairs glass corner 300 mm radius of 10mm thick toughned glass with CP Brass railng, fixed with screws fancy type, complete all as specified

S & Fixed in repair pvc mirror cabinet made of high intensity polythene of biggar size 500 x 400x120 mm complete all as specified

S&F CP connection pipe of 15mmx 450mm with CP check nuts with washers, complete all as specified.

S&F in repair brass chromium plated toilet paper holder, complete all as specified.

S&F in repair brass chromium plated soap dish, complete all as specified.

S & F in repairs brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed.

S&F in repair stainless steel peg set of 06 peg, 45 centimeter long, complete all as specified.

S & F in repair for floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge.

S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.

S&F 2mm thick fibre glass translucent corrugated sheeting of any colour with two corrugations side lap fixed with coah screw and washer in roof, wall etc complete all as specified and directed

M&L point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable unsheathed 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS unsheathed as earth continuity, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc, complete all as specified.

One light/fan/bell point controlled by one by one way switch.

All as above item No120 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.

All as above item No120 (c) but Same board.

One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified

M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified

M&LModular type socket outlet 5 pin 6 Amp flush type, ISI marked complete all as specified

M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified

M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

M&L MCB SPN 40 Amp "B " curve

M&L MCB SP 6 to 32 Amp "B" curve.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.

Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.

S&f exhaust fan PVC body AC single phase 230/240 V of size 300 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.

S & F water heater storage type Geyser vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 1.5 KW and not less than 3 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .

Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete

Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core.

Supply and fix GI Pipe 32 mm dia light grade, for laying in road crossing/ fixing of vertically complete all as directed

Excavation in trenches n.exc 0.45 m wide and n.exc 0.60 m depth for laying of LT cables etc. and getting out in soft/loose soil complete all as specified

Removing excavateed material to a distance not. Exc 50 m and deposting where directed at a level not. Exc 0.6 m above the starting point all as directed

Supply and spreading clean dry sand in trenches for cushioning/cable protection all as specified and directed

Supply and laying sub clas 'B' Bricks of old size ( 23 x 11 x 7 cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer -in-Charge

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.

S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

M/s M M BAHL (BID ID -3420670)