SR to SA in CCB at KPM

Dismantling clearing away and carefully stacking materials useful for re - use Chipping for Concrete & Roughening the surface etc complete as directed by the departmental officers.

Chipping and removing the existing delaminated portion of the concrete surface such as beams columns, ceiling etc.,to the required depth and exposting the rods and dismantled area shall be thoroughly cleaned using sand plaster and wash the surface and steel rebars to remove ball loose particles and additional reinforcement be provided if required and bnoth the existing and new reinforcemnt rods shall be provided with two coats of TEC BEAT ZR Exit Zinc Rich reinforcement Coating system and Mixing and applying mineral based cementations bonding coat Tec bond SBR by brush to the revetted treatment surface and applying coarse repair mortar (Cement mortar mixed with chips) Mixed with the Tec proposal 300 finally guiting the cement mortar 1:3 over the required area by using 7Kg.(100psi) working pressure of air compressor and cement plastering in CM 1:4 mixed with Tec proposal 300 and Tec cure WB shall be applied as curing membrane etc.,complete complying with standard specification and as directed by the departmental officer.

Manufacturing and supplying and fixing in position of Country wood framed weldmesh partition of using size 50x25mm for outer frame and the inner vertical and horizontal frames are made of 50x25mm and placed at 75cm c/c in either directors and screws in with best quality Weld mesh 7.5 x 2.5 cm and welded in frames and fixed in position and the rate are including of fixing, painting with a coat of red oxide anticorrosive primer including cost of paint, transporting, loading and unloading and fixing in position with necessary welding hold faste etc., complete complying with standard specifications.

providing, Supplying and Fixing in position of 12 mm thick UPVC Rainwater Gutter, manufactured from high-quality, UV-resistant and weatherproof UPVC material, including all necessary accessories such as UPVC brackets, clamps, connectors, joints, end caps, outlets, bends, stop ends and other required fittings, securely fixed to the existing roof/fascia at required intervals and laid to proper gradient for efficient collection and discharge of rainwater, including cutting, drilling, alignment, jointing, sealing and making good all connections, complete in all respects as per manufacturer’s specifications, approved drawings and instructions of the Engineer-in-Charge.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers. (110 mm dia)

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., includ- ing dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing of stainless steel of Health faucet of approved quality and board etc., complete complying with standard specification

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 32 mm dia