Construction of Govt ITI Building Gagret at Bhaderkali Tehsil Ghanari Distt Una HP SH Main building civil work water supply and sanitary installation site development SepticTank Rain water harvesting tank approach road and Work shop Block

Amount

Clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of girth upto 30 cm.(thirty centimeter) measured at a height of 1 (one) meter above ground and removal of rubbish upto a distance of 20 (twenty) meters outside the periphery of the area cleared as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Dressing theground including cutting and filling upto 15cm. (fifteen centimeter) as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Construction of embankment for roadway with approved material obtained from borrow pits and laid in layers of suitable thickness not exceeding 200mm ( two hundred millimeters) spreading to required slope and compacted with three wheel 80-100 kN static/ vibratory road roller to meet the requirements of table 300.1 and 300.2 of MORD specifications to lines, grades, level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required including hauling of materials for construction of embankment within all leads and lifts. The rate shall include carriage of machineries, equipment, tools and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royalty, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts and drains etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiselling/wedging out rocks( where blasting is prohibited ) as per drawings and M.O.R.D. technical specification clause 305.1 and as per direction of the Engineer-in-charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty milimeters) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water ) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Back filling with granular material behind abutment, wing wall and return wall complete as per drawing, direction of Engineer in charge and MORD technical specification clause 1204.3.8 including carriage of materials/machinery required to execute the work in all leads and lifts including other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing weepholes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeters) dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) (one vertical : twenty horizental) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 as per direction of Engineer-in-charge including carriage of materials with in all leads and lifts including other incidentals. The rate including octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. .

Preparation of sub grade by dressing to camber (Earth work for the cutting involved for sub grade to be paid for separately)depending upon the classification of soil complete as per HPPWD specification including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including other incidential . The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Consolidation of sub grade with road roller including makng good the undulation etcetra with earth or quarry soil etcetra and rerolling the sub-grade complete as per HPPWD specifications including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including other incidential . The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Construction of gravel/soil aggregate sub base/base by providing well graded material of nominal maximum size grading 80mm (eighty millimeter) as per table 2.3 of IRC SP 77-2008, spreading in uniforms layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachement and compaction with three wheel 80-100 KN static roller capacity to achieve the desired density complete as per specifications contained in para 2.2, 3.6 and 3.7 of IRC SP-77-2008 and as per the direction of Engineer-in -Charge including carriage of material within all leads, lifts and other incidentals .The rate includes octroi, royality, Malkana, toll tax , goods service tax, labour cess or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and Technical Specification Clause 406 in single layer and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying primer coat with Bitumen emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface spraying primer @ 0.70 kg to 1.00 kg (zero point seventy kilogram to one kilogram) per square meter using mechanical means as per M.O.R.D. technical specifications clause No. 502 including carriage of materials within all leads and lifts and other incidentals . The rate includes octroi, royalty, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying Tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 kg to 0.30 kg (zero point twenty five kilogram to zero point thirty kilogram) per square meter on the prepared granular surface treated with primer and cleaned with Hydraulic broom as per M.O.R.D. technical specifications clause No. 503 including carriage of materials within all leads and lifts and other incidentals . The rate includes octroi, royalty, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing laying and rolling of open graded premix carpet of 20mm ( twenty millimeter) compacted thickness composed of 13.2mm ( thirteen point two millimeter) to 5.6mm ( five decimal six millimeter) aggregate at the rate of 0.27 cum (zero point two seven cubic meter)mixed with penetration VISCOSITY GRADE-30 (THIRTY) PAVING BITUMEN at the rate of 14.6 kg.(fourteen point six kilogramme) per 10 sqm.(ten square meter) of road surface to required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in suitable plant, laying with paver finisher and rolling with a three Wheel 80-100 KN static road roller capacity finished to required level and grade to be followed by seal coat of type-B as per M.O.R.D. technical specifications clause No. 508 by mechanical means including carriage of materials within all leads and lifts and other incidentals . The rate includes octroi, royalty, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B as per technical specification clause 510 using VISCOSITY GRADE-30 (THIRTY) PAVING BITUMEN at the rate of 6.8 kg ( six point eight kilogram) premixed with 0.06 ( zero point zero six) cubic meter of fine aggregate per 10 Sqm. ( Ten square meter) mixing and heating in mini hot mix plant and laying by mechanical means of mixed material and rolling with power road roller 80-100 KN ( eighty to one hundred KN) as per the direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royalty, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentialss. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavation in drain and channel etcetera in earth work in all classification of soil such as pick jumper work blasting work in soft soil and hard rock saturated soil any other mixed varity of soil in dry of saturated conditions upto any depth and lift/height including dressing of side bed and disposing of all surplus excavated earth upto all lead disposed earth to be levelled and neatly dressed as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete any height as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in foundations, footings, bases of columns and mass concrete and plain concrete including plinth beams and columns upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work up to all floor level as per HPPWD specifications in beams cantilevers, girders and lintels, sides and soffits of beams ,beam haunchings, cantilivers , bressumers and lintels upto any depthin all height from floor as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in columns, pillars, posts and struts square rectangular polygonal in plan upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etcetera upto any thickness upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string cousrses and the like upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in stair cases with sloping or stepped soffits, excluding landings upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in edges of slab and breaks in floor and walls upto any width in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 mechanically mixed (One cement : Six sand : twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 mechanically mixed (one cement:three sand: six graded crushed stone aggregate 20mm (twenty millimeter) nominal size excluding cost of centring and shuttering in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings, bases of columns and the like and mass concrete upto all height depth and HPPWD specification approved drawing design as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in lintels, beams, girders, bressumers,and cantilevers upto all height and HPPWD specification and approved drawing design as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs landing and shelves and their support balconies, beams, girders bressumers and cantilever upto any floor level/height and HPPWD specification and approved drawing design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts upto any floor level and HPPWD specification and approved drawing design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in wall (any thicknessbut not less than 0.10 m thickness) attached pillasters, buttresses, plinth and string courses etcetera from top of foundation level upto any floor level and HPPWD specifications and approved drawing and design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto any floor level/height and HPPWD specification approved drawing design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4(one cement: two sand: four graded/crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcementt for reinforced concrete work in columns, pillars, posts and struts upto any floor level inclusive as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4(one cement: two sand: four graded/crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed including curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and plinth inclusive as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying upto floor two level cement concrete1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and curing complete including cost of form work in string courses, coping bed plates, anchor blocks, plain window sills and the like upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying upto floor two level reinforced cement concrete 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give a smooth and even surface including centring and shuttering etcetra but excluding cost of reinforcement in string course, copings bed plates, anchor block, plain windows cill and the like upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying upto floor two level cement concrete 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and curing complete including cost of form work in mouldings as in cornices windows sills etcetera not exceeding 15cm (fifteen centimeter) in girth upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:1:2 (one cement: one sand: two graded crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically miexed including complete exlucding cost of form work in superstructure including water profiling upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. (two point seven five kilogrmme) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement : three sand) as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Providing throating of plaster drip and moulding to RCC Chajja upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:8:16 (one cement: eight sand: sixteen graded crushed stone aggregate 20mm (twenty millimeter) nominal size and curing complete on slab and floor excluding cost of form work in screed laid under flooring as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing polysterene bask or rod in expansion joins after properly prepared joints surface with PIDIPRIME is a single component primer as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Tor steel reinforcement approved make i.e. SAIL TISCO, RINL,JINDAL,PANTHER of JSPL, Shyam steel for reinforced cement concrete work including bending binding straightning and placing in position complete including cost of binding wire upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks in foundation and plinth in cement mortar 1:6(One cement: six sand) in all heights and depth as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks in superstructure above plinth level in cement mortar 1:6(One cement: six sand) in all heights / any floor level and as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry using common burnt clay Second Class building bricks in foundation and plinth in cement mortor 1:4(one cement: four sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry using common burnt clay Second Class building bricks in superstructure above plinth level upto any floor level/height in cement mortor 1:4(one cement: four sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling brick bats in soakpit as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded crhsed stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortor 1:6 (one cement: six sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Square rubble masonary courses with hard stones of approved quality in foundation and plitnth including raking out joint in cement mortor 1:4 (one cement: four sand) as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling 25mm (twenty five millimeter) nominal size crushed stone aggregate in soak pit as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling 12mm (twelve millimeter) nominal size crushed stone aggregate in soak pit as as per the direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws in second class deodar wood upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing factory made 35 mm (thirty five millimeter) thick flush door shutters including black enamelled M.S. butt hinges interior grade, commercial type, commercial board i.e. non decorative phenol board termite resistance water proof core of black-board made of shutter flush door Kit Ply Industries (Swastik) Jawala Smarat Laminate Pvt. Limited CNC Commercial Limited (Shivalik) SR Jindal Ply Wood Industries (Primer) construction with frame of first class hard wood and well matched commercial three ply veneering with vertical grains of cross bands and face veneers on both faces of shutters upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing factory made 35 mm (thirty five millimeter) thick including black enamelled M.S. butt hinges covered with 3mm (three millimeter) thick plastic sheet upto 90 cm (ninenty centimeter) hieght (from inside only) with M.S butt hinges and secrews etcetera complete made of shutter flush door Kit Ply Industries (Swastik) Jawala Smarat Laminate Pvt. Limited CNC Commercial Limited (Shivalik) SR Jindal Ply Wood Industries (Primer) as per architectural drawings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick flush door shutter commercial board shutter made of Novapan Kt Ply National Archid ply, action Tasa, Green all cuts finished with 19mm x 6mm (nineteeen millimeter into six millimeter) hard wood edging, inside lining of P.G.I. sheet including fixing with nickel plated piano hinges with screws etcetera complete (hard wood edging to be paid seprately) as per architectural drawings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick Commercial Board water proof shutters made of Novapan Kt Ply National Archid ply, action Tasa, Green for up boards including fixing with nickel plated piano hinges with screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter)thick water proof etcetera commercial board made of Novapan Kt Ply National Archid ply, action Tasa, Green in shelves/box, back side of the cup board/cabinet shall be finished with 6/8mm (six oblique eight millimeter) thick water proof ply for cup board with butt joints and fixing with nails and screws etcetera complete any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glazing with fiber glass /polycarbonate sheet in aluminium door, window, ventilator shutters make of Lexun Duratuff. and partition etcetera with PVC/neoprens gasket etcetera complete upto any floor level/height as per the architectural drawings and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and erecting 119mm (one hundred nineteen millimeter) thick everest dry wall (hollow construction) with steel wall framing system ((76mm track and 76mm studs) with 12.5mm (twelve point five millimeter) plaster board as first layer and 9mm (nine millimeter) everest heavy duty fibre cement boards as second layer and rock wool insulation (having fixing of wall panel, skirtingdetails etcetera as per design consideration of everest wall solutions) and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing polycarbonatd tranparent sheet 1.20mm (one point two zero millimeter) thick made of Lexun Duratuff. in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1.00mm (one millimeter) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etcetera complete up to any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing square edges cover fillets (beading) 19mm x 6 mm (nineteen millimeter into six millimeter) section including mitring at junctions with wood screws and nails complete in first class deodar wood upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 6mm (six millimeter) thick hard wood edging ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 6mm (six millimeter) thick everest board of approved shade and pattern size 595mm 595 mm (five hundred ninety five millimeter into five hundred ninety five millimeter) mounted of powder coated G.I. frame work fixed with wall or ceiling etcetera with specified clamps and G.I. wires and rawl plugs with necessary secrews etcetera as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing powder coated monad profile tiles (aluminum sheet) 600 x 600 x 0.70mm (six hundred into six hundred into zero point seven zero millimeter)mounted on powder coated G.I. frame work fixed with wall on ceiling etcetera with specified clamps and G.I. wires and rawl plugs with necessary secrews etcetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(three hundred into sixteen millimeter ) anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter ) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeter ) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter ) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminum handle anodized transparent or dyed to required colour and shade with necessary screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminum handle anodized transparent or dyed to required colour and shade with necessary screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter ) aluminum handle anodized transparent or dyed to required colour and shade with necessary screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing bright finished brass furniture handle upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 115mm (one hundred fifteen millimeter) bright finished brass heaps and stapples (safety type) with necessary screws etc complete upto any floor level height as per the direction of Engineer-In-Charge including making good the floors as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) bright finished brass floor door stopper with rubber cushion screws etcetera to suit shutter thickness complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) oxidized M.S. single acting spring hinges with necessary screws etcetera complete any floor level/ height (Indian make)as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) chorium plated MS bolts with necessary screws etcetra complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Prokviding and fixing 65x35mm (sixty five into thirty five millimeter) special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etcetera complete (Indian make of approved quality) any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing bright finished brass ball catcher 10 mm (ten millimeter) dia upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick 150mm (one hundred fifty millimeter) wide pelmet with 25 mm (twenty five millimeter) diameter wooden curtain rods and brackets including fixing 25x3mm (twenty five into three millimeter) M.S. flat at 10 cm. (ten centimeter) Long and plugs etcetera complete with first class deodar wood upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick green chalk board (Non magentic) with superior quality framing specially anodized aluminum profile 20mm x 15mm (twenty millimeter into fifteen millimeter)with corners of black plastic shall be provided. The board surface shall be non porus ceramic particals on the top green surface for smooth writhing with chalk over 11mm (eleven millimeter) thick partical board which shall have backing material of glavnized sheet 0.28mm (zero point two eight millimeter) thick approx the board shall be fixed on the wall with specially designed "J"clamp with the help of nylon sleevs and screws as per the requirement upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick exterior grade black board of kit ply (gold) water proof kit ply made of Novapan Kt Ply National Archid ply, action Tasa, Green and approved shade and and colour in panelling and wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured abd paid for separately) upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Kota stone slab 55x55cm (fifty five into fifty five centimeter ) minimum size flooring 20 mm (twenty millimeter) (average) thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 25mm (twenty five millimeter) thick upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Kota stone slab 55x55cm (fifty five into fifty five centimeter ) 25 mm (twenty five millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement :three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 40mm (forty millimeter) thick cement concrete flooring with ironite mix 1:2:4 (one cement: two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size laid in one layer finished with a floating coat of neat cement as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster skirting (upto 30cm (thirty centimeter) height with cement morter 1:3 (one cement: three sand) finished with a floating coat of neat cement including rounding of junction with floor complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Automaltic hydraulic compressed 300 x 300 x 25 mm (three hundred into three hundred into twenty five millimeter ) polished terrazzo tiles ISI marked No. 1237 in 70% (seventy percent) white 30% (thirty percent) grey cement ratio. The ratio of chips shall be 55% (fifty five percent) white and 15%(fifteen percent) of each maroon, yellow and dark green shade. The size of chips shall be O.B.2B laid in floors, treads of steps and landings on a bed of 25 mm (twenty millimeter ) average thickness in cement mortar 1:6 (one cement :six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of silver grey shade complete any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Automaltic hydraulic compressed 300 x 300 x 25 mm (three hundred into three hundred into twenty five millimeter ) polished terrazzo tiles ISI marked No. 1237 in 70% (seventy percent) white 30% (thirty percent) grey cement ratio. The ratio of chips shall be 55% (fifty five percent) white and 15%(fifteen percent) of each maroon, yellow and dark green shade. The size of chips shall be O.B.2B laid in skirting and riser of steps not exclusive 30 cm. (thirty centimeter) in height on 10 mm (ten millimeter ) thick cement mortar 1:3 (one cement :three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of silver grey shade complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying marble work (table rubbed and polished) in flooring 20mm (twenty millimeter) thick base in cement mortor 1:3 (One cement :Three sand) including jointed with cement mortar 1:2 (One white cement :Two marble dust) with an admixture of pigment to match of the shade of marble 20mm (twenty millimeter) thick white makrana marble complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Grade-IV spartic ceremic tiles 5.5 ( Five point five ) milimeter thick in flooring make of Kajaria, NITCO, Somany orient, RAK, Johanson & Johanson {(300x300 (three hundred into three hundred)} milimeter size treads of steps laid on bed of 12 ( Twelve ) milimeter thick cement mortor 1:3 (one cement :three sand ) finished with flush pointing in white cement complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 2mm (two millimeter) thick heavy duty Homogeneous vinyle Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying marble work semi round nosing in flooring 20mm (twenty millimeter) thick base in cement mortor 1:3 (One cement :Three sand) including jointed with cement mortar 1:2 (One white cement :Two marble dust) with an admixture of pigment to match of the shade of marble with baroda green marble slab having semi round nosing including preparing of nosing including rubbing and granite polish finish complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

White glazed tiles dado 200mm x 300mm x 6mm (two hundred millimeter into three hundred millimeter into six millimeter) thick of approved grade make of Kajaria, NITCO, Somany orient, RAK, Johanson & Johanson in skirting ,riser of steps and dado 12 (Twelve) milimeter thick cement mortor 1:3 (one cement :three sand ) and jointed with white cement slurry complete upto any floor level/ height as per directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Extra for making semi round nosing in granite stone in treads of step, skirting, dado etcetera rubbing and granite polish complete upto any floor level/ height including returned moulded ends and angles to moulding as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimeter) wide and 4 mm (four millimeter) thick glass strips in joints of terrazzo floors complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeter ) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter ) dia meter with prepainted limpet and rubber washers complete with all accesoriees as required complete any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeter ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets of TATA Durashine with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing valley 60 cm (sixty millimeter) overall 0.60mm (zero point six zero millimeter ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet of TATA Durashine with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing flushing 38cm (thirty eight centimeter) overall with 0.60mm (zero point six zero millimeter), thick prepainted sheet of TATA Druashine in roofing with hot dipped metalic zinc coated sheet of with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia meter and prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing prepainted sand which puffed roofing with 0.60mm (zero point six zero millimeter) thick steel sheet over steel trusses made of cold rolled sheet coil with epozy coating of 25 micron having a puff depth of 50mm (fifty millimeter) and weight of 35-37 cum ( thirty five to thirty seven cubic meter) steel framed are to be painted of approved shade, including fixing with screw, prepainted iron J or L hooks , bolts and nuts with prepainted limpet and rubber washer complete with all accessories as required as per specification and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimeter) wide 45 cm (forty five centimeter) overall semicircular plain G.I. sheet of TATA make gutter with iron brackets 40x3mm (forty into three millimeter size bolts and nuts and washers etcetera including making necessary conections with rain water pipe complete upto any floor level/ height as per design and the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) dia pipe on wall face PVC (Finolex make) rain water pipes of working pressure not less than 4.5 kg/sq. cm (four point five kilogramme per square centimeter) including filling the joints with approved adhesive complete upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. holder bat clamps 100mm (one hundred millimeter ) dia of approved design to CI or SCI pipe imbeded in end including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 mix (one cement: two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size and cost of cutting holes and making good the wall etcetera complete in all heights and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PVC Plain bend 150mm (one hundred fifty millimeter) dia on wall faces PVC (finolex make) accessories for rain water pipes including filling the joints with approved adhesive complete any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PVC shoe 150mm (one hundred fifty millimeter) dia on wall faces PVC (finolex make) accessories for rain water pipes including filling the joints with approved adhesive complete any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S.BP Sheet makes of TATA Durashine 1.66 to 2.00 ( One point sixty six to Two point Zero Zero) milimeter thick in eaves board /facia/soffit /ceilng including cutting ,fixing and welding to steel roof members and applying a coatof red lead primer complete upto any height as per direction by the Engineer in charge (base member of steel work shall be measured and paid for separately) complete in all respect including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make of.Sail, Tisco, RINL, Jindal partner of (JSPC) Shyam Steel ,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make of Sail, Tisco, RINL, Jindal partner of (JSPC) Shyam Steel,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings complete upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make of Sail, Tisco, RINL, Jindal partner of (JSPC) Shyam Steel,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the likeupto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing decorateive screen in corridor manufactured from 12mm x 12mm (twelve millimeter into twelve millimeter) hollow square pipes welded with M.S. hollow sections of size 50mm x 50mm (fifty millimeter into fifty millimeter), supported on 10 cm (ten centimeter) dia M.S. hollow pipes. A center piece shall be of 20mm x 3mm (twenty millimeter into three millimeter) M.S. flat rame covered with M.S. black sheet made to shape upto all heights as per architectural drawing and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing steel railing in ramp for handicaped made of CP 50mm (fifty millimeter) dia steel pipe slip resistant with round ends two level at 75 cm (seventy five centimeter) and 90 cm (ninety centimeter) height and suported with 25mm (twenty five millimeter) dia steel pipe duly welded in all corners and fixing in position complete upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing moulded hand rail of readymade M.S. hollow pipes50mm (fifty millimeter) dia welded in straight length over mild steel flat at top of vertical balusters 20mm x 20mm (twenty millimeter into twenty muillimeter)solid square bar including one coat of red oxide priming coat complete (mild steel flat and balusters of railing shall be measured and paid seprately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 85 cm (eighty five centimeter) high rail having baluster of 19mm x 19mm (nineteen millimeter into nineteen millimeter) size and 12mm x 12mm ( twelve millimeter into twelve millimeter) MS solid square bars in combination with MS flat of 40mm (forty millimeter) 5mm (five millimeter) size with MS hollow pipe hand rail baluster dully welded/jointing with electric gas welding with top MS flat upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and fixing rolling shutters having width below 3.5 (three point five) meters of approved make made of 80 mm x 1.25mm (eighty millimeter into one point two five millimeter) M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete any height but excluding the cost of the top cover and spring as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 27.5 (twenty seven point five) centimeter long wire spring grade No.2 for rolling shutters complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing top cover for rolling shutters having width bolow 3.5 (three point five) meter complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ball bearing for rolling shutters complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and fixing rolling shutters having width 3.5 (three point five) meters and above of approved make made of 80 mm x 1.25mm (eighty millimeter into one point two five millimeter) M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing top cover for rolling shutter having width 3.5 meter and above complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing steel Tubular square section 23cm x 23cm (twenty three centimeter into twenty three centimeter) of standard and suitable using fasteners with nut and bolts including and corrosive epoxy paint complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing readymade steel Almirah made of Godrej finsished with powder coating with necessary screws etcetera complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Rolling shutters operated by bevel gear box and crank handle exceeding 12 sqm (twelve square meter) and upto 25 sqm (twenty five square meter) in area (average say 18.5 sqm (eighteen point five suqare meter) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. channel 75mm x 40mm (seventy five millimeter into forty millimeter) and M.S. flat 75mm x 4mm (seventy five millimeter into four millimeter) for door frame in combination welded together to make one frame including hinges jamb, lock jamb beed, and if required angle threshold of mild steel angle 50x25mm (Fifty into twenty five millimeters) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel but hinges 2.5mm (Two point five millimeters) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing angle iron door window clearstory window frame manufactured from M.S. angle iron section of 35mm x 35mm x 4mm (thirty five into thirty five into four millimeters) and 50mmx4mm (Fifty into four millimeters) thickness mild steel flat in combination welded together to make one frame including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm (Fifty into twenty five millimeters) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel but hinges 2.5mm (Two point five millimeters) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as per approved drawing design and as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25x25x5mm (twenty five into twenty five into five millimeters) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25x25 mm (twenty five into twenty five millimeters) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimeters) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing double rebate steel shutter make of San Harvic, Steelman Industries PD Industries , metal window, Chandni Industries, Ganpati Udyog (Rajpura) of window side hung, top hung and fixed window (one side glazed and other wire gauge) of standard rolled steel section/ stee; Z-section and T-section, T-hinges joints, mittred and welded with manufactured relevant ISI standard specification with 16mm ×3. 15mm (sixteen millimeter into three point one five milimeter) lugs 10cm (ten centimeter) embedded in cement concrete blocks 15cm ×10cm ×10cm (fifteen into ten into ten centimeter) size in cement concrete1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimeter) nominal size including handel with closing device and making provision of other windows fixture, where required, including providingand fixing of 4mm (four milimeter) thick glass pans of Modi Float, Sainty Govind, Asian with glazing clips and special metal sash putty of approved make complete for glazed shutter and metal beading with screw etcetra and including fixing of wire gauge using galvanised MS wire gauge of IS gauge designation 85-G with wire of 0.56mm and for fixing wire mesh with M.S flat 20x3mm for beeding and screw complete including frame with ISLC section 75x40mm (seventy five into forty millimeter) including applying a priming coat of red led paint after pretreatment of the surface as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. hollow pipe 150mm (one hundred fiflty millimeter) make of TATA, Jindal (Hisar) Parkash Steel Tube, Bhushan Industries of standard and suitable using fasteners with nut and bolts including anti corrosive epoxy paint complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. hollow pipe 100mm (one hundred millimeter) make of TATA, Jindal (Hisar) Parkash Steel Tube, Bhushan Industries of standard and suitable using fasteners with nut and bolts including anti corrosive epoxy paint complete as per the directions of Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing grab bar in handicapped toilet made of cromium plate 40mm (forty millimeter) dia steel pipe with M.S. plate 10mm x 100mm x 5mm (one hundred muillimeter into one hundred millimeter into five millimeter) thick embeded in cement concrete block complete as per HPPWD specifications, approved drawings, designs and entire satisfication as per the directions of Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat over make of ICI, Nerolac, Berger, Assian Paint, Shalimar new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete in all height with ready mixed priming paint brushing red lead, Red-oxide/zinc oxide chrome as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surfaces with enamel paint make of ICI (Dulux Glass) Nerolac Berger (Luxal High Glass) Asian Paints 9 premium Apcolite Glass)Shalimar other than white brushing to give an even shade including cleaning of all dirt,dust and other foreign matter complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat make of ICI, Nerolac, Berger, Assian Paint, Shalimar over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting readymixed paint brushing wood primer pink complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint make of ICI (Dulux Glass) Nerolac Berger (Luxal High Glass) Asian Paints 9 premium Apcolite Glass)Shalimar other than whire to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping with enamel paint other than white complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat make of ICI, Nerolac, Berger, Asian Paint, Shalimar on new concrete/masonry /asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with readymixed primer in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with ready mixed paint make of ICI (Dulux Glass) Nerolac Berger (Luxal High Glass) Asian Paints 9 premium Apcolite Glass)Shalimar brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with paint other than whire in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying of Birla white level plaster over prepared surface including grinding, chiseling pre-wetting,cleaning with wire brush to remove dirt, dust, grease, oil etcetera level plast to be mixed thoroughly with mechanical stirrer/manually by adding 23 to 26% (twenty three to twenty six percent) of clean potable water and waiting for 5 to 10 (five to ten) minutes before application coat thickness to be between 3-12mm (three desh twelve millimeter) after cleaning the surface patch coat of level plast to be applied to ceiling upto any height to fill all pores hobey combing areas using hand trowel after complete any height drying of patch plaster finish coat of level plast applied with hand trowel and finishing the same with aluminium bottom at the time of application applicator should wear hand gloves white using level plast. Providing and applying two coat of Birla white wall care putty with a maximum thickness of 1 to 1.5mm (one to one point five millimeter) over base coat of level plast inluding pre-wetting, cleaning of blade marks, removal of loose particales etceteraWCP to be mixed thoroughly with mechanical stirrer/manually by adding 35 to 40% (thirty five to forty percent) of clean potable water and waiting for 5 to 10 (five to ten) minutes before application second coat to be applied after 2 to 3 (two to three) hours of complete any height drying of 1st coat and after rubbing with emery paper of size 500 (five hundred) and above remove line putty blade marks complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:6 (one cement: six sand)as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:6 (one cement: six sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:4 (one cement: four sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 8mm x 12mm (eight millimeter into twelve millimeter) groove in plaster of 20 cm (twenty centimeter) interval as/ Elevetion in cement mortor 1:4 (one cement: four sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) thick plain cement mortor bands in cement mortor 1:4 (One cement: four sand) upto 300mm (three hundred millimeter) in width raised band as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

20mm (twenty millimeter) thick plain cement mortor bands in cement mortor 1:4 (One cement: four sand) upto 300mm (three hundred millimeter) in width raised moulded cement mortor band as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/ plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering (two coats) make of Berger (Castle), JENSON & NICHOLSON (J&N), Golden, Paints Aqualac with oil bound washable distemper of Nerolac, Berger (Bison Acrylic) Assian Pains (Tractor Acrylic) , Shalimar make and of required shade on undecorated ceiling/ surfaces or sloping of roofs to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper make of Berger (Castle), JENSON & NICHOLSON (J&N), Golden, Paints Aqualac and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Wall painting (two coats) with acrylic emulsion paint of Nerolac, Berger (Bison Acrylic) Assian Pains (Tractor Acrylic) , Shalimar make for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing wall with water proofing cement paint of ICI, Nerolac, Berger, Asian Paint, Shalimar make and if required on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, and remains of loose powdered materials etcetera including sand paper smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with doctor fixit, fast fler or equivalent with two component polymer modified cementitious coating consisting of material comentitious power and a polimer liquid in two coat for first coat clean and saturate surface and then applying a coat of Dr. fixit and the same process shall be extended upto 300mm (three hundred millimeter) vertically and second coat of shall be applied in opposite direction after four to six hours of application of firstly coat then sprinkle sand on top surface of applied Dr. fixit then apply cement mortor 1:4 (one cement: four sand) and admixed with 200ml (two hundred millilityer) of pidiproof CW @ LW 200 ml (two hundred milliliter) per 50 kg (fifty kilogram) bag complete in all height as per the architect drawing including entire carriage of materials with in all leads and lifts and other incidentials as per the directions of Engineer in charge . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed or dry brick/stone/aggregate 40mm (forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand including preparation of ground complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing plinth protection heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 of cement mortar 1:4 (one cement : four sand)with 230mm (two hundred thirty millimeter) dia half round store ware pipe laid in cement concrete 1:4:8 (one cement:four sand: eight graded/crushed stone aggregate 40mm (forty millimeter) including form work and curing complete including border or kerb block grey or coloured over sub-base of concrete with 25mm (twenty five millimeter) thick average thickness and laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing and polishing complete (Sub base concrete floor to be paid for seprately) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeter) nominal bore in trenches, galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya (earth work in trenches to be measured and paid separately) complete in depth all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 32mm (thirty two millimeter) nominal bore in trenches, galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya (earth work in trenches to be measured and paid separately) complete in depth all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 40mm (forty millimeter) nominal bore in trenches, galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya (earth work in trenches to be measured and paid separately) complete in depth all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 15mm (fifteen millimeter) to wall celling and floor galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya and clamps including making good the wall ceilling and floor complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeter) to wall celling and floor galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya and clamps including making good the wall ceilling and floor complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 32mm (thirlty two millimeter) to wall celling and floor galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya and clamps including making good the wall ceilling and floor complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 40mm (forty millimeter) to wall celling and floor galvanised mild steel tubes (midium grade), tube fittings made of B.S.T. Jindal (Hissar) Tata Steel Tubes Ltd. Parkash Surya and clamps including making good the wall ceilling and floor complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twenty millimeter) to 40mm (forty millimeter) nominal bore by providing and fixing tee make of Link, KS AMCO, AVR, NBR,RR, SUW including cutting and threading the pipes complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Fixing 20mm (twenty millimeter) nominal bore water meter stop-cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etcetera cutting and making long screws complete (water meter and stop-cock to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1000 (one thousand) litres net capacity tank PVC water storage tank three layers technology of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 2000 (two thousand) litres net capacity tank PVC water storage tank three layers technology of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Construction chamber with 100 mm (one hundred millimeter) thick masonry in cement mortar 1:5 (one cement: five sand) walls of brick 300mm x 300mm x 500mm (three hundred millimeter into three hundred millimeter into five hundred millimeter) inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm One hundted millimeter into one hundred millimeter into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two sand four graded crushed stone aggregate 20mm (twenty millimeter nominal size) 75mm (seventy five millimeter) thick foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and inside plastering with cement mortar 1:3 (one cement :three sand) finished with a floating coat of neat cement including curing complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1216 (16 mm O.D. pipe) Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe kitech make U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one meter spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1620 (20 mm O.D. pipe) Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe kitech make U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one meter spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing equal tees 1216 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing equal tees 1620 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing reducing tees 1620 x all branches composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing reducing tees 2025 x all branches composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female branch tees 1216 x 1216 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female branch tees 1620 x 1620 x 20 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female elbows 1216 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female elbows 1620 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Male thread connector 1216 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Male thread connector 1620 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female thread connector 1216 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female thread connector 1620 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Couplers 1216 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Couplers 1620 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Reducers 1620 x 1216 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Reducers 2025 x 1216 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Equal Tees1216 PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Equal Tees 1620 PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Reducing Tee 1620 x all branches PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Reducing Tee 2025 x 2025 with all branches PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female branch Tee 1216 x 1216 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female branch Tee 1620 x 1620 x 20 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female elbows 1216 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female elbows 1620 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Male thread connector 1216 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Male thread connector 1620 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female thread connector 1216 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Female thread connector 1620 x 15 mm thread PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Couplers 1216mm PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Couplers 1620mm PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Reducers1620 x 1216mm PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Reducers 2025 x 1216mm PE-AL-PE- composite internal seal compression fittings kitech make as per IS- 15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etcetera(This type of fitting to be used for hot water supply only) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia high pressure PVC spigotand socket,waste and ventilating pipes Finolex make including fixing with approvedadhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia high pressure PVC spigotand socket,waste and ventilating pipes Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimeter) thick bolts and nuts Finolex make complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC single equal branch with oval access door,ISI marked insertion rubber washer 3 mm (three millimeter) thick bolts and nuts Finolex make complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC door bend with oval access door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts Finolex make complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC door bend with oval access door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts Finolex make complete including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC single equal branch plain Finolex makeincluding fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC single equal branch plain Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC Collars Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC Collars Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC plain bend Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC plain bend Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC offset 45° Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC offset 45° Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC double equal branch with oval access door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC double equal branch with oval access door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC plain double equal branch Finolex makeincluding fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC plain double equal branch Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC Clamps Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC Clamps Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110 x 75mm (one hundred ten into seventy five millimeter) PVC floor trap make of Finolex or self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110 x 90mm (one hundred ten into ninety millimeter) PVC floor trap make of Finolex self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm x 110mm (one hundred fifty millimeter into one hundred ten millimeter) dia PVC reducer Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC ‘P’ or 'S' trap for water closet (squatting pan) Finolex make including jointing the trap with the pan and PVC pipe with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC ‘P’ or 'S' trap for water closet (squatting pan) Finolex make including jointing the trap with the pan and PVC pipe with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia PVC cowl Finolex make in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC cowl Finolex make in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

150mm (one hundred fifty millimeter) nominal size diameter chase in stone / brick masonry walls for fixing sand cast iron / cast /spun iron pipes and fittings including making good the same with stone / brick work in cement mortar 1:3 ( one cement : three sand) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

100mm (one hundred millimeter) nominal size diameter chase in stone / brick masonry walls for fixing sand cast iron / cast /spun iron pipes and fittings including making good the same with stone / brick work in cement mortar 1:3 ( one cement : three sand) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Orissa Pattern Cera , Parryware, Hindwaree, Sanitaryware, Neycer vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (five hundred eighty millimeter) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Ordinary closet Cera, Parryware, Hindwaree, Sanitaryware, Neycer or equivalent vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the rap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Angle Indian Universal closet Cera, Parryware, Hindwaree, Sanitaryware, Neycer or equivalent vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the rap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 10 (ten) Liter net capcity PTMT Coloured / white automatic flushing cistern Prayag make with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing solid type white plastic seat and cover make of commander, Diplomat, Hindware, Adminal, Cera for wash down water closet with C.P. Brass hinges and rubber buffers in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Flat back type of size 430mm x 260mm x 350mm (four hundred thirty millimeter into two hundred sixty millimeter into three hundred fifty millimeter)vitreous China bowl pattern urinal make of parryware, Hindware, Sanitaryware, Neycer, Cera including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Vitreous China 10 (ten) litres capacity automatic flushing cistern make of parryware, Hindware, Sanitaryware, Neycer, Cera with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass flush pipe /spreaders for urinal make of kingston, Gem, Parko, Techno,LAL, ESS, ESS, JAQUAR, Sceiko with fitting such as unions, clamps etcetera (all in C.P. Brass) including cutting holes and making good the same in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Flat back 550mm x 400mm (five hundred fifty millimeter into four hundred millimeter) vitreous China wash basin of Cera, Parryware, Hindware, Sanitaryware, Neycer make or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 610 mm x 460 mm (sixs hundred ten millimeter into four hundred sixty millimeter) with bowl depth 200 mm (two hundred millimeter) stainless steel kitchen sink of AMC, UNIK, DIAMOND, Neelkanth make board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Hindware, Parrywise, Sanitaryware, Neycer, Cera ,mark vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia C.P. Brass waste (heavy duty make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko) for wash basin or sink in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimeter) dia chromium plated grating of superior quality make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko for floor, gully or nahani trap in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing galvinized mild steel puff pipe 1 mtr. (one meter) long with brass perforated cap with 15mm (fifteen millimeter) dia in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 450 mm (six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on plastic Sheet or plywood sheet and fixed to plastic plugs with C.P. Brass screws and washers in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 20mm (six hundred millimeter into twenty millimeter) C.P. Brass Towel rail (heavy duty make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko) complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 120 mm (six hundred millimeter into one hundred twenty millimeter) glass shelf with C.P. Brass bracket and guard rail complete make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko, fixed to wooden plugs with C.P. Brass screws in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glass liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Division Plate of make of Parryware, Hindware, Saintarywase,, Naycer, Cera for Urinals 600mm x 300mm (six hundred millimeter into three hundred millimeter) Vitreous China in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass bid tap (heavy duty make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko) of Jaqar with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass Pillar tap (heavy duty make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko) with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass angle valve (heavy duty make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko) of Jaqar with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300/450mm (three hundred oblique four hundted fifty millimeter) length 15mm (fifteen millimeter) nominal bore P.V.C connection withbrass unions in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve make of Zoloto Sant, L&K, Leader with wheel in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore brass full way valve make of Zoloto Sant, L&K, Leader with wheel in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) G.I./M.I Union Link, KS, AMCO, AVR, NBR, RR, SUW (where not included in the items) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) G.I./M.I Union Link, KS, AMCO, AVR, NBR, RR, SUW (where not included in the items) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) G.I./M.I Union Link, KS, AMCO, AVR, NBR, RR, SUW (where not included in the items) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) G.I./M.I Union Link, KS, AMCO, AVR, NBR, RR, SUW (where not included in the items) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT bib cock Paryag make of approved quality and colour fancy 15 mm (fifteen millimeter) with flange in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT pillar cock fancy Paryag make of approved quality and colour 15 mm (fifteen millimeter) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20 mm x 15 mm (twenty millimeter into fifteen millimeter) PTMT push cock Prayag make with reducer of approved quality and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore PTMT concealed stop cock of Prayag make with flange of approved quality and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT angle cock Prayag make of approved quality and colour 15 mm (fifteen milimeter) with flange as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT jet spray Prayag make of approved quality and colour with one meter tubeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) dia high pressure PVC spigot and socket, waste and ventilating pipes Finoles make including fixing with approved adhesive etcetera complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 150mm (one hundred fifty millimeter) diameter cement concrete 1:4:8 (one Cement : four Sand : eight graded/crushed stone aggregate 40mm (forty millimeter) nominal size bedding for stoneware pipes necessary form work and curing completeas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying in cast iron cover without frame for man holes for frame of internal dimension 455x610mm (four hundred fifty five into six hundred ten millimeter) rectangular CI cover (light duty single seat pattern-I) the weight of cover to be not less than 23kg (twenty three kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimeters nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimeters nominal size) inside plastering 15mm (Fifteen milimeters) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimeters nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimeters) and 500mm(Five hundred milimeters) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten milimeters) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix(One cement: Two sand: Four graded crushed stone aggregate 20mm (twenty millimeter) nominal size foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty millimeter nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimeter nominal size) finished smooth complete in cluding curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimeter ) and 1.00 mtrs(One meter) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten millimeter ) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kgs(twenty three kilogram) and weight of frame 15 Kgs (Fifteen kilogram) with 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) complete in all respects as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ make of Prefect, Hind or ISI marked S.W. pipes complete any height with CI grating brick masonry chamber in cement mortar 1:5 (one cement: five sand) and water tight C.I. cover with frame of 300mm x300mm (three hundred millimeter into three hundred millimeter) size (inside) the weight of cover to be not less than 4.53kg (four point five three kilogram) and frame to be not less than 2.72 kg (two point seven two kilogram) square mouth trap 180mmx100mm (one hundred eighty millimeter into one hundred millimeter) size P-Type in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ make of Prefect, Hind or ISI marked S.W. pipes complete any height with CI grating brick masonry chamber in cement mortar 1:5 (one cement: five sand) and water tight C.I. cover with frame of 300mm x300mm (three hundred millimeter into three hundred millimeter) size (inside) the weight of cover to be not less than 4.53kg (four point five three kilogram) and frame to be not less than 2.72 kg (two point seven two kilogram) square mouth trap 180mm x150mm (one hundred eighty millimeter into one hundred fifty millimeter) size P-Type in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Mono Block pump 2HP ISI marked single phase Kirloskar. Serex, Worthiingon, Crompton including fixing complete with nuts and bolts etcetera as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying fixing C.I. Cover 300 mm x300 mm (three hundred millimeter into three hundred millimeter) with frame for gully trap (standard pattern) the weight of cover to the not less than 4.53 kg (four point five three kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

M/s Bhagwati Construction Co.

M/s Surindera Traders