GEJM-12/2024-25

Amount

Note:- Please refer Appx 'D' of particular specification for the list of makes of BOQ items.

Surface dressing n exc 15 cm deep and getting out in soft/loose soil all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose dense soil all as specified.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 mtr in width), including getting out in any type of soil, soils are mixed with rubbles and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge. (Note:- As per site conditions the earth will be slide during excavation all the safety measures shall be taken under own cost and the rate to be quoted incl removal of sliding earth at no extra cost and no extra allowance to be paid excl authorised width as per SSR Part-II special conditions).

Ditto all as per srl item No 04 above but exc 1.5 mtr and n exc 3.00 mtr

Ditto all as per srl item No 04 above but exc 3.00 mtr and n exc 4.50 mtr

Ditto all as per srl item No 04 above but exc 4.50 mtr and n exc 6.00` mtr

Ditto all as per srl item No 04 above but exc 6.00 mtr and n exc 7.50 mtr

Ditto all as per srl item No 04 above but exc 7.50 mtr and n exc 9.00 mtr

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Removing excavated material exc. 250m and n exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for Cement concrete (1:4:8) type D-2 40 mm stone graded aggregate as in foundation filling and mass concrete all as specified.

M&L for PCC (1:2:4) type B 1 using 20mm graded stone aggregate as in walls or, retaining walls, any thickness, size or shape including pilastewrs, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed by Engr-in-Charge.

M&L for Re-inforced cement concrete Design Mix M-30 (20 mm gradede stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L for Re-inforced cement concrete Design Mix M-30 (20 mm gradede stone aggregate) as in sump Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

M&L for Re-inforced cement concrete Design Mix M-30 (20 mm gradede stone aggregate) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specied and as specified.

M&L for Re-inforced cement concrete Type B-1 (1:2:4) 20 mm graded stone aggregate as in foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L for Re-inforced cement concrete Type B-1 (1:2:4) 20 mm graded stone aggregate as in Column,pillars, piers and struts all as specified and as directed.

M&L for Re-inforced cement concrete Type B-1 (1:2:4) 20 mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specied and as specified.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of concrete foundation and plinth beams and similar work and as in fair finish all as specified.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions and to be finish in rough all as specified.

M&L for Formwork soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick and similar work and as in fair finish all as specified.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of concrete foundation and plinth beams and similar work as in curved surface, rough finish all as specified.

M&L for Formwork to circular suface of wall, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to battersides of pillars, posts, struts, piers, columns and stanchions and to be finish in fair all as specified.

M&L for Formwork to circular soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick and similar work and as in fair finish all as specified.

M&L forTMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as per srl item No 27 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified.

S&F for warer bar as in circular, for concrete joints all as pecified.

Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement complete all as specified and as directed.

M&L Rendering cement plaster, 15 mm thick on other fair faces of brick/concrete surfaces of wall in cement mortar 1:4 finished even and smooth w/o using extra cement complete all as specified.

M&L Rendering cement plaster, 15 mm thick on other fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified.

M&L Rendering cement plaster, 5 mm thick on ceiling finished even and smooth in cement mortar 1:3 w/o using extra cement complete all as specified.

Supply and laying sand filling under floors or in foundations incl watering and consolidation all as specified.

Supply and laying Hard core of guage 63 mm broken stone or boulders deposited, spread and levelled in layers n exc 15 cm thick water and rammed to a true surface all as specified.

M&L for 25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.

M&L for cement concrete type D-2 (1:4:8) 75 mm thick as in sub base all as specified.

M&L for 75mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

M&L Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:6 all as specifid and directed

M&L Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.

M&L for Vitrified Ceramic (Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4. (Sample as approved & Kept in GE's sample room)

Description all as item No 44 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.

M&L Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4.( sample as approved & kept in GE's sample room)

M&Lglazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. (Sample as approved & Kept in GE's sample room)

M&L16-18mm thick Granite (Z- Black) (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of cement mortar (1:4), 15mm thick all as specified and directed by Engineer-in-charge.

Material and labour,16-18 mm thick Granite (Z- Black)(of any type) work (table rubbed and polished) for wall lining' (Veneering to wall) 12 mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including rendering of cement mortar (1:4), 10mm thick all as specified and directed by Engineer-in-charge. (Colour and Size of Granite Slab shall be approved by GE).

M&L for glossy finish prelaminated 18mm(+0.7mm) thick celuka glossy finish PVC foam ply of density 600Kg/cbm. One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter/War drobe.(Colour as directed by ENGR-in-CHARGE) all as specified and colour as directed by Engr-in-Charge/GE.

M&L for plain 18mm (+0.7mm) thick celuka mate finish PVC foam ply of density 600Kg/cbm. Celuka PVC ply for kitchen cabinet shutter/War drobe.(Colour as directed by ENGR-in-CHARGE) all as specified and colour as directed by Engr-in-Charge/GE.

S&F for PVC edge banding tape 0.50 mm thick 18 mm wide fixed with resin/hot pressed all as specified and as directed. (Colour all as directed by Engr-in-Charge).

Material & labour for 6 mm thick PVC Celuka board plain , as in kitchen cup board shutters/shelves etc any colour complete all as specified and Approved by GE.

S&F in repair continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

S&F steel fasteners of size 75mm long drilled and fixed to walls

S&F 50mm dia and 75mm long steel supports fixed with bolt at bottom of cupboards box all as specified

S&F stainless steel designer handles ( heavy type ) 100 mm size fixed in drawers or shutters as in cupboards, as approved by GE.

S&F UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

S&F UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F in repair self suction Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm, rectangular shape complete all as specified.

S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) size 565 x 360 x 395 mm ,white complete including ‘P’ or ‘S’ trap , white seat cover with flat bottom and MS CP hinging device etc, complete, all as specified fixed in repairs. (Rate of including in taking out and removal of old EWC unhygienic condition)

S&F in repair 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC), complete all as specified.

S&F in repair Wall Mixer 3-in-1 System with Provision Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange fancy type complete all as specified.

S&F in repairTall body Single Lever Basin Mixer (Suitable for table top wash hand basin) without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified.

S&F in brass Chromium plated, single towel rail 600mm long complete all as specified.

S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified.

S&F in Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge.

S&F in cromium plated towel rack 600mm long without lower hangers, complete all as specified.

S&F in Chromium plated Overhead rain Shower 250x250 mm square shape single flow with shower arm , complete all as specified.

S&F in Table top wash hand basin with fixing accessories set, not less than size: 600 x 480x150 mm, rectangular shape, including CP cupling and PVC waste pipe complete all as specified.

S&F long body 15 mm Bib Cock with wall flange cast copper alloy, chromium plated fancy type ,complete all as specified.

S&F in angular stop cock with wall flange , cast copper alloy, chromium plated screwed with wall flange sutable for 15 mm iron pipe, complete all as specified.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

S&F Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

S&F tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Ditto all as per srl item No 84 above but 20 mm dia.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

S&F single side prelam PVC sheet used instead of plain to match the colour of door Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with Moulded 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F butt hinges of stainless steel cold rolled medium weight of size 100mm as specified.

S&F Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F for Aluminum Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F in repairs Aluminum Power coated, sliding windows two track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.

S&F in repairs Aluminum anodized powder coated frame of size 101.60 x 44.45 made out of 1.20mm thick aluminum section fixed to floor/wall with plugs and screws complete all as specified and directed

S&F in 5.50 mm thick glass sheet ordinary quality Tinted in aluminium doors/windows complete removing and refixing, exceeding 0.5 Sqm in each pane.

S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, spacing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 all as specified and as directed.

S&F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats all as specified.

S&F 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified

M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.

S&F Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified.

S&F 4 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden/steel surfaces as in square n exc 0.50 sqm in each pane, all as specified.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of roof finished fair & even and including mixing of water proofing compound.

M&L for water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed .

M&L for preparation of newly sufrace of APP Membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of cement base paint over and incl preparing new plastered surfaces with alkali resistant priming paint, complete all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of Exterior emulsion paint incl 2 to 3 mm thick wall care putty and preparation to receive distemper all as specified and as directed.

M&Lfor Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed.

M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls.

S&F 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and as directed.

M&L and fabriaction of Roof trusses (framed), trussed, purlins, raftars, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W Gde E-250 quality A, complete all as specified and as directed by Engineer-in-charge

S&F and fabrication , framed brackets of angles or tees or plates with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

S&F for MS work such as angle iron fencing posts struts and flat iron fillets etc, including making of swan neck and drilling hole punching,splitting ends to secure chain link fencing or fixing of barbed wire to posts including all necessary cutting, welding,bolting, bending or riveting etc complete all as specified and similar work conforming to Fe-290 Gde E-165.

S&F for Mild steel screw bolts machine made with hexagonal or square heads at one hand and screwed the other, ot screwed both ends, each screwed end to be fitted with washers n.exc 5 cm long and 5 to 10 mm dia.

S&F for MS work as in pintle hinges, sliding bolt inserted in concrete or fixed to wall complete all as specified and as directed.

S&F for MS work as in tubular section as in gates incl fabrication, cutting, hanging complete all as specified and as directed.

S&F mild steel bars as in rungs and similar works all as specified and as directed by Engr-in-Charge.

M&L for 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Supply only chain link MS galvanised fencing of size 50mm x 50 mm cold dip complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, angle iron frame and flat iron, rails, straining bolts, etc. complete all as specified. Note:- Angle iron, flat iron & nuts and bolts shall be measured and paid separately.

Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line wire to be measured).

Preparation of new steel surface of any description,over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Providing and fixing false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of Size 595x595x mm of approved texture,with fully perforated 12 mm thick micro tegular edges, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per BS 476 (Part -4)-1970 and light reflactance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (Galvanized @120 grams per Sqm incl both sides) comprising of Main T runners of Size 15x32 mm of length 3000mm, cross T of Size 15x32 mm of length 600 mm to form grid module of size 600x600 mm, suspended from ceiling galvanized mild steel items (Galvanizing @ 80 grams per Sqm) i.e., 50 mm long, 8 mm outer dia meter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mtr length and L-shape level adjuster of Size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall screws. The work shall be carried outvas per specifications, drawing and as per directions of Engr-in-Charge.

M&L for 4 mm thick PVDF aluminium composite panels consisting of a polyethylenr coresand witched between two 0.4 mm thick aluminium skins and coated with polster resinof PVDF coating confirming any colour and shade as directed by Engr-in charge, in cladding to external wall or ceiling fixed with aluminium frame work with screws and joints to be sealed with silicon, incl necessary scaffolding as required and letters also made with PVDF sheet as per size as directed by engr in charge and letter measured flat as plan area all as specified and as directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket all aas specified and as directed by Engr-in-Charge.

Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

M & L for Cutting existing cast iron /GI pipe in position for insertion of CI specials or GI fittings viz Tee,collar,bend or tail piece etc for 80 to 200 mm bore pipe including removing of blockage, cleaning of pipe line complete all as specified and directed by Engr-in-Charge

GI tubing light grade 25mm bore along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles complete all as specified and as directed by Engr-in-Charge.

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 25mm, complete all as specified and as directed by Engr-in-Charge

M&L for construction of valve pit chamber having internal dimension 0.6m x 0.6m and depth 0.75m made of brick wall (full brick wall) with subclass 'B' bricks, straight or curved on plan exc 6m mean radius and built in CM 1:6. incl plastering exposed surfaces with CM 1:4 and provn of pre cast valve pit cover of RCC, 50mm thick with opening handle complete.

M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed meadium duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One Light / Fan/ Exhaust Fan point controlled by one, one way switch 6 Amp complete

One 3 pin socket outlet 6 amp independent complete.

One 3 pin socket outlet 6 amp same board complete.

All as per srl item No 136 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Supply and fixing Switch piano made of polycarbonate flush button single pole one way, 5 Amps, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing socket 2 in 1,3 pin, 6 Amps combined 2 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Switch piano made of polycarbonate flush button single pole one way, 15 Amps, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing socket 2 in 1,3 pin3 pin, 16 Amps 2 module complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED light fitting 1 x 18Watt, 220V, Batten type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr-in-charge. Note:- The LED batten and LED tube rod shall be of same make.

Supply and fixing of lamp holder,PVC /Polycarbonate type with back plate for batten fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED lamp suitable for B22 holder of capacity 10 Watt complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar 100 Amp rated ,Earth Bar ,neutral Bar Door Earthing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar 100 Amp rated ,Earth Bar ,neutral Bar Door Earthing complete all as specified and directed.

Supply and fixing of MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of MCB Triple Pole and neutral pole 63 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of exhaust fan, steel body AC single phase. 230 V of size 300 mm sweep with, blades, and frame and louvers and including making of holes in wall, floor etc complete all as specified and directed by Engineer-in-Charge.

Supply, laying for replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium Multistranded stranded conductor, Armoured cable10 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest amendments of sizes complete all as specified and directed by Engineer-in-Charge.

Supply, laying for replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium Multistranded stranded conductor, Armoured cable 25 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest amendments of sizes complete all as specified and directed by Engineer-in-Charge.

Material and labour for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of ceiling fan complete with blade, down rods, and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with connected from ceiling rose / connector with & including suitable size flexible copper conductor PVC insulated sheathed cord, or including Fan Hook, Clamps, nuts, bolts and down rod suitable length 1.2 Mtr etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Supply and fix MCB TPN complete 63 Amp with 240 Volts, rupturing capacity 10 KA 'C' series, complete all as specified and directed.

Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specified and directed by Engineer-in-Charge.

Supply & laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specified and directed by Engineer-in-Charge.

Material and labour for cutting of bituminous road / floor / culvert / PCC hard standing for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed.

M/S PARAMJEET SINGH (BID ID -3078237)

CELMAC REGD (BID ID -3094334)