SPECIAL REPAIR TO BLDG NO P 160 (STATION GURUDWARA) AND CERTAIN MINOR WORKS UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of floor hearth and wall tilling including mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor topping, 25mm thick, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor topping, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L non-skid ceramic tiles coloured 7 to 8 mm thick (square/ rectangular), primium quality area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6 complete all as specified and directed.

M&L vitrified ceramic (light shade) coloured tiles 10 mm thick ( square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality and including 25 mm thick PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as sub base complete all as specified and directed.

M&L vitrified ceramic (light shade) coloured tiles 10 mm thick ( square/rectangular) polished as in skirtings fixed on 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured (colour & shade as approved) tile 450mmx350mm and 7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.

M&L premium quality digital coloured tiles 100mmx 100mm / 150mmX 150mm and 7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar1:4 complete all as specified and directed.

M&L 50 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Ser Item No 12 here-in-before but except bricks. Note: usuable bricks obtained from demoliton shall be re-used.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.

Resecuring or easing & adjusting, without taking down Shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete. Makes: Rajshri or equivalent in approved approved makes.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) not exceeding 1.50 Sqm from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces,, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick work , finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on fair faces of concrete finished even and fair in ceilingscomplete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces / old pre[ared surfaces after complete removal of existing treatments etc complete all as specified and directed.

M&L applying two coats of cement based paint over a coat of alkali based primer including preparation of newly plastered wall surfaces complete all as specified and directed.

M&L applying two coats of OBD over a coat of primer over a coats of wall care putty (01 mm thick) including preparation of new plastered wall surfaces complete all as specified and directed.

M&L white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed.

M&L preparation of old treated plastered surfaces including complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed.

M&L white wash in two coats on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

S&F framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways,railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.

S&F mild steel,box type ventilator with side hung shuttes including projecting type hinges with steel handles and steel peg stay, complete without sash bars, dovtailed or welded complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a shop coat of red-oxide priming complete all as specified.

M&L TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L Mild steel Derformed or twisted bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L reinforced cement concrete M-25 as in slabs supported on walls, beam and columns in floors, foos, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

M&L form work to soffits and sides of floor or roof beams, beams, haunching, lintel etc including supports over hang etc complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (Horzontal or sloping) complete all as specified and directed.

M&L cement concrete 1:2:4, Type B1 (using 20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams complete all as specified and directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft eams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

M&L cement concrete 1:2:4, Type B1 (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polygonal flat rough finished surfaces of concrete complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

S&F galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed. Note: serviceable pipes obtained from Srl item No 51 here-in-before shall be reused. The cost of new fittings if required shall be deemed inclusive of quoted rate.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and directed. Note: serviceable pipes obtained from Srl item No 52 here-in-before shall be reused. The cost of new fittings if required shall be deemed inclusive of quoted rate.

S&F in repair low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories including connecting to existing water pipe and WC etc complete all as specified and directed.

S&F 500 ltr capacity rotational moulded, triple layer polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

S&F 15mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20mm Ball valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for providing PCC 1:3:6, type C-1 (using 20mm graded aggregate) as in hold fast block, copings, bed plate, hold in down blocks complete all as specified and directed.

S&F for 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement and complete all as specified and directed.

M&L hard core of gauge not exceeding 63 mm deposited spead, levelled, watered well rammed to a uniform smooth surface not exceeding 15 cm thick using broken stone or boulder complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and directed.

S&F stop valves 15 mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for pipe or for unions and fixed. complete all as specified and directed.

M&L 15 mm bore health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair stop cock/angle valve fancy type, chromium plated screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union of 15 mm bore complete all as specified and directed.

S&F in repair bib tap of cast copper alloy brass 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed.

S&F 125mm dia PTMT grating fixed over trap with cement complete all as specified and directed.

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed as in repair complete all as specified.

S&F Soap dish of PTMT fixed to wall with steel screws and pvc rawl plug complete all as specified and directed.

S&F in repair Viterous china wash basin, white/coloured, flat back, size 550mmx400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc and making good distrubed surfaces to match with the existing complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F 125 mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified and directed.

S&F in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Dismantling asbestos cement/PVC pipe including clamps complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) bends ad provided with access door complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat cement mortar 1:4 complete including moulding at corners and polishingcomplete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide & not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. not exceeding 10Sq m on plan & getting out in soft/loose soil complete all as specified and directed.

M&L earth work in excavation for all kind of soil by mechanical means(Hydraulic excavator) in foundation trenches or drain (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out excavated soil and disposal of surplus excaveted soil as directed, within a lead of 50m complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming soft/loose soil in layers not exceeding 25 cm thickness complete all as specified and directed.

Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 150 mm complete all as specified and directed.

Demolition and breaking up salt glazed stoneware (SGSW) drain pipes set in cement mortar internal dia of pipe 200 mm complete all as specified and directed.

M&L cement concrete 1:3:6, type C2 (using 40mm graded aggregage) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore pipecomplete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (using 40mm graded aggregage) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 200 mm bore pipe complete all as specified and directed.

M&L 150 mm dia reinforced concrete pipes,class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.

M&L 200 mm dia reinforced concrete pipes,class NP2 laid and jointed complete with collars in trenches complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 150 mm dia pipescomplete all as specified and directed.

M&L 15 mm thick rendering in cement mortar 1:4 inside and outside wall of manhole of brick work/ concrete surface as per manufactures instructions complete all as specified & as direcetd. Notes: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instructions.

Demolition of PCC of any description and in any position as in not otherwise specifically provided complete all as specified and directed.

M&L cement concrete 1:4:8, type D2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete 1:2:4, type B2 (using 40mm graded aggregate) as in surface channels and drains complete all as specified and directed

M&L providing cement concrete 1:2:4, type B1 (using 20mm graded aggrgate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.

M&L brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L RCC 1:2:4, type B1(using 20mm graded aggregate) as in precast cover slab , shelves and similar articles and setting in mortarcomplete with joints to match complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor topping, 75 mm thick, complete all as specified and directed.

M&L cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in floor topping, 100 mm thick, surface finished even and smooth without using extra cementcomplete all as specified and directed.

Cleaning of blockage IWCs / EWC, bathroom / kitchen by cleaning the nahani traps / gully traps and CI / PVC pipe line upto the 1st Manhole. All the mud / sludge / Kitchen waste / plants roots to be cut/ removed and getting out by washing the traps, CI waste pipe throughly by opening the cleaning eyes lids properly . The sludge/ waste received during cleaning process to be removed at a distance not exceeding 100m from the bldg and Bleaching powder to be spread over waste and burred under the Soil / Earth . Earth work shall be included in the unit rate complete all as specified and directed.

Cleaning and desludging / de-watering of septic tanks /Manholes and soakage well of any depth by using honey sucker followed by mechanical roding followed by hydraulic jet pressure machine etc as required,with the entire satisfaction of Engr -in- charge and re-fixing the manholes cover to its original position complete all as specified and directed.

M&L PVC (SWR) gully trap in repair 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

M&L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

S&F Piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed all complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L writing letters or figures (Block. Roman, Italic or Indian) not exceeding 30 cm high complete all as specified.

M&L broken stone or bolders hard core of gauge not exceeding 63 mm, depoisted, spread and levelled in layeers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100 mm thick cement concrete type 1:4:8, D-2 (using 40 mm graded aggregate) as in sub base and all other similar works complete all as specified and directed.

M&L 100 mm thick for PCC Flooring using cement concrete 1:2:4, type B-1 (using 20 mm graded aggregate) as in flooring complete all as specified and directed.

Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified.

Demolition of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) to maintain the slope on roof complete all as specified and directed.

M&L rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of roof complete all as specified and directed.

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.

All as per Srl item No 124 here-in-before but using old brick tiles retieved from dismantling including cleaning and removal of mortar from tiles.

M&L for water proofing treatment to roof surface including parapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Notes: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.

S&F applying two coats of aluminium paint on APP roof treatment complete all as specified and directed.

M&L providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L providing, cement concrete 1:2:4 , type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, sides of footpath and paved areas etc. rounded or chamfered on edges complete all as specified and directed.

S&F 5mm thick hollow/hard plain colour PVC sheet in strips & channel feathered at the edges for fixing on PVC Wall Lining, Insulated PVC Wall Lining, and PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20mm and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, in framed work complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 Gde E-250, quality A complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar work fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws all as specified complete all as specified and directed.

S&F polycarbonate plain roof sheet 2.0 mm thick of any colour having tensile strength of 200 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screwscomplete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia rain water pipes with joints complete all as specified and directed..

Supply and install hi wall split units of capacity 1.5 Tonn, indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and Min EER 4.5.of capacity1.5 tonn complete all as specified and directed.

Supply and fix refrigerator, electric driven (single phase), capacity not less than 236 litres ,BEE 5 star rated complete all as specified and directed.

Supply, installation, commissioning of Water cooler fully stainless-steel, electric driven single phase having approx. storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLSH cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One 5 Amps socket outlet same board controlled by one single pole 5/6 Amps switch

(c) One 5 Amps socket outlet independent board controlled by one single poles 5/6 Amps switch

All as per Srl Item No 147 here-in- before but one three pin 15/16 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Makes: - Precision/Anchor/Havells/Legrand

S&F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate including GI box inner, 3 module complete all as per specified & directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate including GI box inner, 4 modulecomplete all as per specified & directed. Makes:- Precision/Anchor/Havells/Legrand

S & F in repair Modular white cover plate including GI box inner, 6 module complete all as per specified &directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Makes: - Precision/Anchor/Havells/Legrand

S&F LED tube light fitting 18 Watts, 4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F LED Wall bracket light 8 Watt decorative type (Warm white) enegy saving including 8 W LED Bulb complete all as specified and directed.

S&F LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F ceiling rose surface type, PVC/polycarbonate, isolated, bakelite 65mm x 50mm, 3 terminals ISI marked complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed.

S&Fin repair sheet metal enclouser SPN DB's 12 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 3 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

S&F MCB SPN, 32 Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified

S&F MCB SP, 6-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified

S&F MCB SP, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified

S&F Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

S&F sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note -Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run.

Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm and 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core complete all specified and directed.

M&L sand filling under floors, foundation or cable protection including spreding leveling in layer not exceeding 25cm thick complete all as specified and directed.

M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of under ground cable complete all as specified and directed.

S&F galvanized steel tube 40 mm dia light grade for protection of cable complete all as specified and directed.

S&F Switch piano flush type single pole one way 5/6 Amp complete all as directed.

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Makes:- Cat Part No LHEXBLP7UN1W018 of make "Havells" or techno-commercially equivalent in approved makes.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar, Neutral link,Earth bar and Din rail, 4 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, two single core cables flat or circular of stranded conductor of 10.0 Sqmm complete all as specified and directed.

M&L galvanised iron steel tubing 40 mm (1.5") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

M&L galvanised iron steel tubing 20 mm (3/4") bore ISI marked medium grade with all fittings (ISI marked) duly laid in trenches complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 40 mm dia and fixed complete all as specified and directed.

Cutting existing CI/GI pipe 40/50/80/100 mm bore including run lead joints of suitable size with necessary fittings complete all as specified and directed.

M/s Bansi Lal (BID ID -3335807)

M/S Yashpaul Gulati (BID ID -3335785)

Bhupindra Traders (BID ID -3335718)