AS-09-31(Balance Work)

Amount

Construction of Embankment with Materials obtained from borrow pits with a lifts upto 1.5m etc, complete as per approved balance work estimate and technical specification clauses.

Constn of sub-grade and earthen shoulder with approved materials obtained from borrowpits, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying spreading and compacting stone aggregates of specific sizes to WBM Gr.-II specification, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying spreading and compacting stone aggregates of specific sizes to WBM Gr.-III etc, complete as per approved balance work estimate and technical specification clauses.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface etc, complete as per approved balance work estimate and technical specifications clauses.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor, etc, complete as per approved balance work estimate and technical specifications clauses.

Providing, laying and rolling of open-graded premix carpeting of 20mm thickness composed of 13.2mm to 5.6mm aggregate using penetration grade bitumen etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying seal coat sealing the volds in bituminous surface laid to the specified levels, grade etc, complete as per approved balance work estimate and technical specification clauses.

Providing and fixing of semi reflective cautionary, mandatory & informatory sign board as per IRC 67 made of 1.5mm thick MS Sheet etc, complete as per approved balance work estimate and technical specification clauses.

Reinforced cement concrete M-15 grade ordinary kilometre stone(pre cast) of standard design as pe IRC 8-1980, etc, complete as per approved balance work estimate and technical specifications clauses.

Reinforced cement concrete M-15 grade 200 metre stone (pre cast) of standard design as pe IRC 8-1980, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing etc, complete as per approved balance work estimate and technical specification clauses.

Construction of Hill side drain in accordance with requirment of specification true to lines and grades etc, complete as per approved balance work estimate and technical specification clauses.

Earthwork in excavation for foundation of structures upto 3m depth as per drawing and technical specification clause 1104 including setting out, etc, complete as per approved balance work estimate and technical specification clauses.

Providing PCC, M10 with natural gravel in open foundation, etc, complete as per approved balance work estimate and technical specification clauses.

Brickmasonary work in cement mortar in foundation complete excluding pointing and plastering etc, complete as per approved balance work estimate and technical specification clauses.

Brickmasonary work in cement mortar in substructure complete excluding pointing and plastering etc, complete as per approved balance work estimate and technical specification clauses.

Plastering with cement mortar (1:4) 15mm thick on brick work in substructure etc. complete as per approved balance work estimate and technical specification clauses.

Providing and laying reinforced cement concrete pipe NP3, 1000mm dia for culverts on first class bedding of granular material in double row including fixing collar with cement mortar etc. complete as per approved balance work estimate and technical specification clauses.

Bored cast-in-situ M35 grade RCC pile, 1000mm dia excluding reinforcements complete as per drawing and technical specifications etc. complete as per approved balance work estimate and technical specification clauses.

Providing and laying of PCC M-20 levelling course 100mm thick for pile cap etc. complete as per approved balance work estimate and technical specification clauses.

Providing laying RCC grade M25 in pile cap complete as per drawing and techinical specifications of MORTH section No. 1100, 1500 etc. complete as per approved balance work estimate and technical specification clauses.

Supplying, fitting and placing TMT bar reinforcement in foundation complete etc. complete as per approved balance work estimate and technical specification clauses.

Pile load test on single vertical pile in accordance with I.S. 2911 (Part IV) etc. complete as per approved balance work estimate and technical specification clauses.

Providing laying RCC grade M25 in sub-structure comple as per drawing and Technical Specification Clause 802, 804 etc. complete as per approved balance work estimate and technical specification clauses.

Supplying, fitting and placing TMT bar reinforcement in sub-structure complete as per drawing, etc, complete as per approved balance work estimate and technical specification clauses.

Furnishing and placing Reinforcement / prestressed cement concrete in super structure (for solid slab super-structure), etc, complete as per approved balance work estimate and technical specification clauses.

Supplying, fitting and placing TMT bar reinforcement in super-structure complete as per drawing, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying cement concrete wearing course M30 grade with crushed stone including reinforcement complete, etc, complete as per approved balance work estimate and technical specification clauses.

Construction of RCC railing of M25 grade with crushed stone, cast-in-situ with 20mm nominal size aggregate, tolerance of vertical railing post, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying a buried expansion joint covered with 12mm thick, 200mm wide galvanised weldable, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and fixing 20mm thick compressible fibre board in expansion joint, etc, complete as per approved balance work estimate and technical specification clauses.

Backfilling with sandy material behind the abutment, wing wall and return wall etc, complete as per drawing, etc, complete as per approved balance work estimate and technical specification clauses.

PCC M15 Grade levelling course below aproach slab complete, etc, complete as per approved balance work estimate and technical specification clauses.

Reinforced cement concrete M25 grade approach slab including reinforcement and formwork complete, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying pitching on slopes with Stone/Boulder laid over prepared filter media as per drawing, etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying boulder apron for bed protection with stone boulders of minimum size etc, complete as per approved balance work estimate and technical specification clauses.

Providing and laying filter material under netch pitching as per drawing, etc, complete as per approved balance work estimate and technical specification clauses.

Drainage spouts complete as per approved drawing, etc, complete as per approved balance work estimate and technical specification clauses.

Supplying, fitting and fixing in position true to the line and level elastometric bearing conforming to IRC: 83 (Part-II), Section IX, etc, complete as per approved balance work estimate and technical specification clauses.

Supplying, fitting and fixing RCC guard post size 15cm x 15cm x 150cm long, 75cm above ground and 75cm below the ground including square base etc. complete as per approved balance work estimate and technical specification clauses.

SRI HIROK JYOTI PAUL