Repair/ replacement of Joinery, plastering, path, sanitary fittings, wall, flooring and other misc works in MH,MDC and SHO under AGE BR at GE(U) E/M Meerut Cantt

Amount

Taking down old existing unserviceable stop valve and S&F Chromium plated fancy type long body ,Concealed stop cock , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. complete all as specified and directed.

M&L Brick work with old size fly ash bricks., straight or curved on plan exc 6 m mean radius , built in CM 1:6, complete all as specified and directed.

M&L 35 mm thick, 2nd class Hard wood (Sal) Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. without sash bars ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I; supplied and fitted to chowkhats complete all as specified.

S&F 35 mm thick factory made door Flush shutters , solid core construction , with blockboard core and plywood face panels, commercial type on both sides complete all as specified.

Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) complete all as specified.

Taking down wooden chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down aluminium door with shutters of any size , reparing of hinge block and plate and fixing of door and shutters in the same opening in its position complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt, ISI marked complete all as specified.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

S&F butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

S&F 200mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Taking down old unserviceable tubular towel raiil of any size and S&F CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified.

Taking down of old existing unserviceable floor door stoppers and S&F floor door stoppers of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor , overall length of cover plate 140 mm long complete all as specified.

Taking down of existing unserviceable door closer and S&F Aluminium ( Extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Taking down old existing unserviceable wire cloth and S&F Galvanised steel wire cloth, 0.45 mm nominal dia. of wire and average width of aperture 1.14 mm and fixed with tinned tacks, or galvanised wire staples and fixing retrieved wooden beads including removing old unserviceable wire cloth complete all as specified.

M&L Pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc., complete, as specified, supplied and fixed

M&L Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc., complete, as specified, supplied and fixed

S&F aluminium anodised sections windows double leaves, double shutter side hung/ top hung comprising glazed and gauged shutters with frame using aluminium anodised extruded sectiions of size 101.60mmx38.10mm for frames, 47.62mmx44.45mm for stiles and rails of shutters having 1.25mm thickness, galzing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 75mm size stainless tseel butt hinges -02 Nos per leaf, aluminium anodised extruded section 150mm long hanle-01 Nos per leaf, aluminium anodised stay with hook and eye of suitable side -01 Nos per leaf, aluminium anodised Tower bolts-02 Nos per leaf, aluminium anodised deco grill with suitable U frame for fixing grill, stainless steel wire cloth of 0.36mm dia with 1.18mm width of aperture complete all as specified and directed.

S&F aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf, aluminium anodised fancy extruded section 200mm long handle-01 Nos per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf, aluminium anodised aluminium body hydraulic door closer 01 Nos per leaf of suitable capapcity, floor door stopper of anodised aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L joint free Non Skid ceramic designer coloured tiles ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified.

M&L designer digital glazed ceramic coloured tiles (Group B II) of size excd 0.11 sqm and not excd 0.18 sqm , 7-8mm thick , on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screeding in CM 1:6 complete all as specified. ( The quoted rate shall deem to be includued for screeding and shall not be measured and paid separately).

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in patches , in cement and sand mortar 1:4 , top surfaces finished fair and even complete all as specified

M&L rendering 10 mm thick on fair faces of brickwork or concrete surfaces in ceiling , in cement and sand mortar 1:3 , top surfaces finished even and smooth without using extra cement complete all as specified

M&L preparation of newly plastered /unplastered surfaces of walls by applying distempering with distemper oil emulsion , two coats, white or tinted over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of new plastered / unplastered surfaces of walls and applying two coats with cement base paint , white or tinted over one coat of cement paint primer ( before application of cement base paint) including and washing floors, etc. , of drops and splashes complete all as specified .

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with oil putty at any height complete all as specified.

S&F 3 mm thick figured glass, pin head type in squares not exceeding 0.50 sq.m. in each pane , fixed with oil putty at any height in portion (part) complete all as specified.

Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

M&L preparation of new wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade (ISI) marked , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal , 20 mm bore all as specified.

Taking down unserviceable waste pipe from WHB and S&F 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fixed complete all as specified.

Taking down unserviceable waste pipe from sink and S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fixed complete all as specified.

Taking down of existing pillar tap and S&F Fancy Pillar taps, cast copper alloy , with capstan heads, chromium plated ,screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Taking down existing unserviceable ball valve and S&F Ball brass valves, high pressure, with polyethylene float and flynut complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity and removing complete all as specified

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified.

Taking down of existing unserviceable bib taps and S&F Fancy type long body Bib taps, CP, cast copper alloy with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and directed.

Taking down old unserviceable PVC pipe connections and S&F PTMT connections 15 mm size with PTMT nuts of length 600 mm complete all as specified.

S&F vitreous China EWC wash down water closet pan ( padestal pattern Water Closet , popular) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., and fixing of seat cover complete fixed in repairs complete all as specified.

S&F (in repairs) Vitreous china , 'Orrisa' pattern , size 580x440 mm white, with integral foot rests Water closet only including S&F CI 'P' trap, connection to to flushing pipe,antisyphonage pipe, trap set in and including concrete, provision of lime concrete bedding (1:2:5) min 150 mm thick alround , making good floor to match with the existing complete all as specified. (a) Water closet white cat No. 20004 of Hindware (580x440), equivalent of other sepcified make as approved by GE.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

Taking down existing unserviceable flushing cistern with flush pipe and S&F Low level flushing cistern, moulded from virgin poly propylene 10 litre capacity including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed.

S&F ( in repairs) vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm excluding supply of taps, but including 32 mm dia CP Brass waste fittings , with long screw shanks and fly nuts, 32 mm dia LDPE pipe of required length, complete all as specified.

Taking down of old existing unserviceable glass shelf and S&F corner Sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all completearea of each panel not exceeding o.25 Sqm each.

M&L 12 mm thick Prelaminated particle board, exterior grade, type II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fitted with Ist class HW Shisham beading of 12mmx6mm, wrought on all faces , fixed with screws as in shelves/ partition complete all as specified.

Hacking out old broken glass ( any thickness , size , quality or description ) from metal frames , glazed with aluminium beads upto 1.5 sqm complete all as specified.

S&F 5.5 mm thick figured glass, pin head type in squares not exceeding 0.50 sq.m. in each pane , fixed with neoprene gaskets and aluminium snap beading at any height in portion (part) complete all as specified. Note:- Neoprene gasket and aluminium snap grid shall not be measured and paid separately.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes an approved product of BIS IS-1161-1979 grade St. 240 including painting structural steel with one shop coat of zinc chromate primer paint (including preparation of surface ) at contractor's workshop before fabrication complete all as specified.

S&F steel work in tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 including painting structural steel with one shop coat of zinc chromate primer paint (including preparation of surface ) at contractor's workshop before fabrication complete all as specified.

M&L Rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. Fe-410W grade A complete all as specified.

S&F presssed steel frame steel windows duly fitted with side hung glazed and gauzed shutters including mild steel stay, box type hinges, mild steel tower bolts 100mm long 02 Nos per leaf, 150mm long mild steel handle 01 No per leaf, mild steel grills made out of 12mm mild steel square bars, complete all as specified and shown in drawing No. TD-88 sheet 1/17 to 17/17.

S&F Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

M&L False Ceiling with Exposed Metal ( Aluminium anodised ) frame work and 4 mm thick, White, pre-premiered, self embossed, Reinforced Designer Board conforming to IS-14862 and ISO-8336 ,duly suspended with ceiling complete all as specified.

Demolition of wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including snap grid of any description complete all as specified.

Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed. (Taking down of existing MS wind tie ( where required) to dismantle the mild steel sheet shall be deemed included in the unit rates)

S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified ( Roof area shall only be be measured for the purpose of payment )

Supplying and providing water proofing treatment with using polymeric water proofing membrane complete all as specfied. Note:- Roof area shall be measured for the purpose of payment.

Supply only Integral water proofing compound complete all as specified and directed.

S&F repairs Cast iron 'P' or 'S' trap suitable for 100 mm bore pipe and making joints in cement and sand mortar complete all as specified

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade (ISI) marked , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

S&F ( In repairs) Chromium plated wash basin mixer Brass hot and cold mixer suitable for 15 mm nominal bore pipe with two inlet holes and one outlet holeof specifed make complete all as specified.

Taking down old unserviceable wall mixer with shower and S&F CP Brass wall mixer with telephonic shower , screwed down fancy type,, suitable for 15 mm bore pipe complete all as specified.

S&F ( in repairs )15mm bore Cast copper alloy Chromium plated Angle stop cock( one way) long thread with wall flange , screwed down , high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Taking down old existing unserviceable bib tap and S&F PTMT( Polytetra Methyllene Terephthalate ) Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .Make : Prayag or equivalent

Taking down old existing unserviceable shower rose and S&F Cast Brass chromium plated shower rose 75 mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified .

S&F ( in repairs) Jet Spray with 1 metre PVC tube and holder complete completed

S&F (in repairs) hand shower ( health faucet ) Hand Shower (Health Faucet), (ABS Body) with 1 Meter Long PVC Tube & Wall Hook complete all as specified.

Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity and removing complete all as specified

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified.

Taking down old unserviceable Ball valves and S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.) complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe, class 2, suitable for working pressure upto 1.6Mpa and fixed complete all as specified.

Taking down of existing unserviceable gate valve and S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe class 2, suitable for working pressure upto 1.6Mpa and fixed complete all as specified.

Taking down old unserviceable PVC pipe and S&F 75 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592 , type 'B in any length ( including short lenghts) with rubber ring joints/ solvent ( conforming to IS-14182) cementing joints fixed to walls complete all as specified.

Taking down old unserviceable PVC pipe and S&F 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592 , type 'B in any length ( including short lenghts) with rubber ring joints/ solvent ( conforming to IS-14182) cementing joints fixed to walls complete all as specified.

Taking down existing unserviceable bends and S&F PVC (SWR) bends 75 mm bore (ISI marked) complete all as specified

Taking down existing unserviceable bends and S&F PVC (SWR) bends 110 mm bore (ISI marked) complete all as specified

Taking down old unserviceable gratings and S&F stainless steel grating 100 mm dia complete all as specified.

M&L 20-25mm thick machine cut Kota stone slab of size 550mmx550mm in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give high gloss (mirror) finish complete all as specified.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

Demolition Brickwork or stone boulder masonry/PCC block masonry , built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

Taking down cement plaster on brick or stone walls , concrete block walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish complete all as specified .

M&L Plain cement concrete type C1 (1:3:6), using 20 mm graded crushed stone aggregate,75 mm thick , as in floor/path/ plinth protection,top finished even and smooth without using extra cement complete all as specified.

M&L preparation of newly plastered surfaces of ceilings by brooming down and applying three coats of white wash on newly plastered surfaces of ceilings including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L machine pressed precast cement concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 Grade , using grey cement and pigment, laid dry on sand not less than 25 mm thick, interstices filled in floors/ pathway complete all as specified.( Rate quoted shall deem to be included for filling outer edges with PCC 1:2:4 type B1)). ( Note:- Sand cushion shall be deemed included in the unit rate quoted by Contractor and shall not be measured separately)

M&L 75mm thick, plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in sub base/ base etc. complete all as specified.

M&L Chequered cement concrete tiles 30cmx30cmx25 mm thick with grey cement and pigment , set, jointed and pointed in neat cement slurry over and including 15mm thick screeding in CM 1:6 in floors complete all as specified.

Taking down syphon and S&F PVC syphon assembly in low level flushing cistern complete all as specified and making the cistern functional

M&L for rectifying the leakage of wall mixer/ wash hand basin mixer of any size / dia by renewing PVC/ rubber washers complete all as specified.

M&L for rectifying the leakage of wall mixer/ wash hand basin mixer of any size/ dia by renewing Brass spindle complete all as specified.

M&L CP brass fency type sink mixer with swinging spout ( wall mounted) complete all as specified.

M&L joint free Non Skid ceramic designer coloured tiles ( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:6 complete all as specified.

M&L 12mm thick Granite stone slab ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms, and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screeding in CM 1:4 including making holes for pipes etc and bull nosing on all extrenal faces complete all as specified.

SA construction co.