Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.0 L+₹3.6 L (13.2%)Rejected-Finance GORAKHPUR UTTAR PRADESH | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | L2 | Rejected-Finance Rejected | |
| 3 | L3₹38.5 L+₹11.2 L (40.9%)Rejected-Finance MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹38.8 L+₹11.4 L (41.8%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹39.8 L+₹12.5 L (45.5%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹44.6 L
EMD Value
₹89,300
Closing Date
11 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Spl repair to Bldg No T-30 in MES complex and servant Qtr Bldg No P-05 (Offrs Mess) in M Med Regt and Provn of Toilet near Bldg No T-01 in MES complex under AGE B/R (P-1) at Faridkot Mil Stn
2022_MES_537718_1
GE FRD-32/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE Faridkot
Class D Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹89,300
Yes
13 Sept 2022
13 Jul 2022
13 Aug 2022
13 Jul 2022
11 Aug 2022
28 Jul 2022
Amount
Dismantling of plain or corrugated steel sheeting, any gauge in roof covering including steel double scaffolding complete all as specified and directed .
S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J- type or L -type hooks as in roof,wall covering or bend to curve with grade of zinc coating 275 complete all as specified and directed.
All as per Ser item No 02 here-in-before but except sheets complete all as specified and directed .
S&F 0.80 mm thick galvanised, plain, mild steel sheeting in ridges,hips,valley gutters,drip and straight flashings (length and girth as fixed) with grade of zinc coating 275,fixed with welded or soldered joints complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed
M&L for preparation of old or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .
S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 410-w (Gde E -250) quality B complete all as specified and directed
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
M&L for 100mm thick plain cement concrete 1:2:4, type B-2 (using 40 mm graded crushed stone aggregates) as in flooring, sub base,mass filling complete all as specified and directed
M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path finishing surfaces even and fair complete all as specified and directed .
M&L for forming construction joints 30mm deep x 10mm wide, filled with sealing compound, grade 'A' complete all as specified and directed ..
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed .
M&L for rendering 10 mm thick in patches in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed
M&L for rendering 10 mm thick in patches in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
Rendering 5mm thick in patch work in cement mortar 1:3 on ceiling/soffit of facia or chajjas height upto 08 metres, finished even and smooth without using extra cement complete all as specified and directed.
Taking down old deteriorated concrete /plaster of old surface of facia n. exc 600mm in depth/girth,providing PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as per existing thickness including necessary form work & applying 5mm thick rendering on concrete surface in cement mortar 1:4 including application of two coats of cement base paint complete all as specified and directed
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for preparation of newly plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment of old decorated surfaces of wall, soffits / facia of chajja/ roof slab by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old steel surface of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for complete removal of existing treatment of old decorated surfaces of walls by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil & greasy spots,filling depression to make smooth surfaces and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for Machine cut kota stone slab flooring, 20-25 mm thick , set and jointed in cement slurry over & including 20 mm thick screed in cement mortar 1:6 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
M&L Machine cut kota stone slab 18 to 20 mm thick as in skirting, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
M&L for 20mm thick white marble as in borders of kota stone, set with neat cement slurry @ 3Kg/Sqm and pointed with white cement slurry over & including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed .
M&L for Resecuring or easing and adjusting without taking down of shutter of any description , exc 1 sqm and not exc 2 sqm each complete all as specified and directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
S&F Glazed ceramic coloured tiles 300mmx200mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in flooring complete all as specified and directed
M & L for water proofing treatment to RCC sunken slab as specified below and as directed by Engineer in Charge:- (a) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles, dirt etc. (b) Rendering 15 mm thick in cement mortar 1:3 using water proofing compound on raised vertical surfaces. (c) Creating fillet covering of 50 x 50 mm with polymer modified mortar on the junction of slab and wall (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface. (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating. (f) Apply second coating of two component modified polymer coating after 72 hrs. (g) Laying concrete 1:4:8 over the coating as per requirement. (h) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. (k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : Dr. Fixit / Fosroc / BASF / STP. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) WPC shall be measured and paid seperately.
M&L for forming contraction(Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, grade 'A' complete all as specified and directed ..
Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc (each layer) laid bedded and pointed in any mortar complete all as specified and directed .
Demolition of concrete (un-reinforced) in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L for applying evenly a tack coat of in industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed .
M&L for one coat of approved bituminous primer for use in water proofing and damp proofing treatment @ 0.70 Ltr/Sqm complete all as specified and directed .
M&L for lime concrete 1:2:5 (Lime:surkhi:brick ballast(40mm)) terracing in roof complete all as specified and directed .
M&L 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over & including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed .
All as per item No 50 here-in-before above but except brick tiles complete all as specified and directed .
M&L for flush pointing in cement mortar 1:3 in pavings in floors, roofs, aprons etc complete all as specified and directed .
Supply only integral water proofing compound
M&L for APP based polymeric membrane, minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed .
M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered angles complete all as specified and directed.
Demolition of reinforced cement concrete in suspended slab, beams, lintels,chajjas etc including cutting of reinforcement complete all as specified and directed.
M&L for use and waste of form work to chajjas and similar items including edges for any height of building,surface rough finished complete all as specified and directed .
M&L for use and waste of form work to soffits of suspended slabs such as floor or roof slab, landing and similar work not exceeding 200mm thick (Horizontal or slopping) for rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC 1:1.5:3, type A1 (using 20mm graded crushed stone aggregates) as chajjas complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4, type A1, (using 20 mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floor, roof, landings, deck slab and in shelves complete all as specified and directed.
M&L for TMT bars 10mm dia and over cut to length bend to shape required including cranking, bending , hooking end and binding with and incl mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed
S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed
S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F Aluminium anodised, cast type, handle 125 mm size complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed
M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
M&L for 3 mm thick, frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F MS powder coated decorative drapery rod (colour as approved) 20mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestel pattern/EWC/longpan) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.
S&F vitreous china wash hand basin, size 550x400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings & waste pipe, 15mm chromium plated pillar taps, cast copper alloy with capstan heads, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and chromium plated with long screwed shanks & fly nuts, flange end bedded in red lead cement with PVC connections 15mm size, 450mm long with PTMT nuts and other end fixed complete all as specified and directed .
All as per Ser item No 81 here-in-before but except wash hand basin complete all as specified and directed .
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.
Disconnecting existing tanks of capacity 500 Ltr , setting aside (or lowering if required) for repairs etc and hoisting if required, including cleaning the tank reconnecting and re-fixing in position complete all as specified and directed.
S&F in repair 15 mm bore PTMT ball valve (float valve), high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed.
Dismantling of cast iron or Reinforced concrete drain pipes ,upto 150 mm dia, jointed in cement mortar and taking out of treanches complete all as specified & directed.
S&F 100mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed.
S&F 75mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed.
S&F 50mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
S&F PVC (SWR) bends, any radius ,110mm bore complete all as specified and directed.
S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed.
S&F in repairs Cast iron 'P' trap, bore of pipe 100 complete all as specified and directed .
S&F in repair 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair flush pipe of polythene of low or high density or PVC, 32mm dia, for low level flushing cistern and fixed complete all as specified and directed .
S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair 15mm bore bib tap, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair Stop valve, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed .
S&F in repair 15mm dia stop cock ,cast copper alloy, chromium plated, concealed type with long shank and cup with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed
S&F in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour including fixing to steel pipe complete all as specified and directed .
S&F Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed .
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed .
S&F Stainless steel grating of any size with or without waste hole complete all as specified and directed.
Taking up or down 15mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
Taking up or down 20mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
S&F Galvanised steeI tubing,15mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F Galvanised steeI tubing,20mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F in repair Stop valve, cast copper alloy, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 20mm bore complete all as specified and directed .
S&F Framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc,laid, bedded and pointed in any mortar complete all as specified and directed .
M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregates) in foundation, filling and mass concrete complete all as specified and directed .
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed
S&F Machine pressed precast concrete interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment complete all as specified and directed .
All as per Ser item No 115 here-in-before but except paver blocks complete all as specified and directed .
M&L Pre-cast cement concrete 1:3:6, type C1 (using 20mm graded crushed stone aggregates ) as in kerb stone, set in cement mortar 1:4. including necessary form work , excavation for embedding blocks in ground to depth as directed and finishing exposed surface even and smooth complete all as specified and directed .
Excavation in trenches in soft/loose soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed.
Demolition and breaking up drain pipe (Salt glazed stoneware, AC or Reinforced concrete) 150 mm dia set in cement mortar including demolition of haunching concrete and disposal of rubbish to a distance exceeding 1 KM but not exceeding 1.5Km complete all as specified & directed.
M & L for reinforced concrete pipes class NP-2 laid and jointed complete with collar of size 150mm (internal dia) all as specified and directed.
M&L for Concrete bed to drain pipes using PCC 1:3:6 type C-2 40mm graded stone aggregate including packing under haunching against the sides of pipe after laid & tested for 150mm bore of pipes complete all as specified and direced.
Returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm in soft /loose soil complete all as specified and directed.
Removing excavated material or surplus soil not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for precast PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in manholes cover including necessary form work ,set in cement mortar 1:6 complete all as specified.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L for Reinforced cement concrete M 25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and directed .
M&L for Reinforced cement concrete M 25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed .
M&L for Reinforced cement concrete M 25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in beams, cantilever, lintels upto 1.5 m and similar works complete all as specified and directed .
M&L for Reinforced cement concrete M 25 (Design Mix) (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floor, roof, landing, balckonies, conopies, deck slabs and in shelves and like complete all as specified and directed .
M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .
M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished surfaces of concrete all as specified and directed.
M&L for use and waste of form work to sides of pillars,struts,piers and columns square/rectangular for rough finished surfaces complete all as specified and directed.
M&L for use and waste of form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over upto 10mm dia,in stirrups,spacers and binders complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width & stick inside with solvent cement for stile and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style and rail with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
S&F Glazed ceramic coloured tiles 350mmx250mmx7mm/450mmx350mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed
M&L for rendering 15 mm thick in cement mortar 1:4 with WPC on brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately
S&F Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.
S&F vitreous china wash hand basin, size 630x450mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings & waste pipe, 15mm chromium plated pillar taps, cast copper alloy with capstan heads, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and chromium plated with long screwed shanks & fly nuts, flange end bedded in red lead cement with PVC connections 15mm size, 450mm long with PTMT nuts and other end fixed complete all as specified and directed .
S&F 15mm bore bib tap, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F Stop valve, cast copper alloy, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed .
S&F bottle trap of PTMT , bore dia of discharge pipe 32mm, having minimum water seal of 25mm (minimum weight-260 gms) complete all as specified and directed .
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 20 mm dia of pipe complete all as specified and directed.
S&F vitreous china soap tray embedded in wall complete all as specified and directed .
S&F vitreous china urinal of size 635x395x420mm ,half stall type , white,waste coupling of PTMT including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes complete all as specified & directed
S&F stainless steel urinal push flush valve complete all as specified and directed .
S&F vitreous china wash down water closet pan (pedestel pattern) white in colour with vitreous china toilet paper holder including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.
S&F aluminium anodised,skelton tower bolt of length 450mm with plate,staples,and bolt of extruded section complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) ventilator with frame including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed.
M&L for 5.5 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.
Taking down carefully existing MCCB,MCB,DB TPN/SPN & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.
Taking down carefully existing submain wiring 2/4 run with earthing cable & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.
Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit of suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .
All as per Ser item No 158 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .
All as per Ser item No 158 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .
All as per Srl item No. 158 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed
S&F PVC Lamp holder with back plate suitable for batten fittings complete all as specified and directed .
S&F LED bulb 1 x 10 watt Lamp having luminous efficiency warranty 2 years complete all as specified and directed .
S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Havells Cat Part No LUMILINEBS20WLED865SPCWH/Bajaj Cat Part no 830379 20WCDL/Crompton Cat Part No LDLL20-CDL
S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Havells Cat Part No LHEXACP7IN1W010/Bajaj Cat Part no BCLSB 10W/Crompton Cat Part No LDLL10-CDL
S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6 Sqmm for continous earth wire drawn into and including PVC concealed conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)
S&F Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 10 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 10 Sqmm for continous earth wire drawn into and including PVC concealed conduit of suitable size complete all as specified and directed . Note :- Two runs of 10 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length)
S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.
S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed .
S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.
S&F Sheet metal enclosure for DBs,TPN, double door, 415 Volts, 4 ways, vertical type and space for MCCB complete all as specified and directed .
S&F Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .
S&F Sheet metal enclosure for DBs,SPN, double door, 230 Volts,4 ways with 200 amps rated bus bar complete all as specified and directed .
S&F MCB SP 5 to 32 Amp, 230 volts, B Curve with breaking capacity 10 KA complete all as specified and directed
S&F MCB, SPN, 32 amps, 230V, C Series with breaking capacity 10 KA complete all as specified and directed
S&F MCCB 3 Pole,adjustable type ,415 V, 100 Amps with breaking capacity 36 KA complete all as specified and directed.
Supply & fixing LED flood light 70 watts,230V,AC,outdoor type with thermal management in multiple optics and equipped with IP66 protection,with impact and corrosion resistant complete with driver and lamp enclosed with glass cover , fixing arrangement in road light,security light etc complete with accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed
Supply & fixing PVC insulated, multi stranded aluminium conductor, PVC sheathed cable, 2.5 sqmm 2 core and1.5 sqmm single core, flat or circular cable and making connection of street light fittings from junction box in and including PVC heavy duty conduit of 25mm bore complete all as specified and directed .
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.
M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.
Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.
Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, including taking out existing one complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately.
M&L for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 25 mm dia of pipe complete all as specified and directed.
S&F GI pipe, light grade, 40mm bore, for cable protection, fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement complete all as specified and directed. Note : (i) Excavation and earth work shall be measured and paid separately.
S & F exhaust fan ,steel body, AC single phase, 4 blades with louver shutter suitable for operation on 220/230 volts of 300mm sweep and all fixing arrangements like wall hole, material etc complete all as specified & directed
S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.
Supply & fixing Energy efficient Ceiling fan complete with blades, down rods, electronic type regulator & accessories, 230 V,1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) including writing of MES number (Black, Roman, Italic or Indian) n. exc 30cm height complete all as specified and directed
Supply, fixing and testing LED street / security light fitting of 25 Watt fitted on 4 to 9 meter high octagonal pole / wall/Swan neck pole including LED lamps complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy. The luminaries shall be monolithic construction, totally enclosed, dust and water proof with minimum IP-65 protection as per IS-10322-1982 (Part-I) with latest amendments and input voltage range 140-300V, AC, frequency 50-60 Hz, PF should be more than 0.9 with total harmonic distoration. THD (I) less than 15%, cool white colour and lamp starting time should not be more than 10 second, Fittings should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300V, AC. Driver should also have double phase protection, no load, open circuit and short circuit protection. LED light fittings should be suitable for ambient temperature from - 10 degree centrigrade to 50 degree centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/ toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficient of LED luminaries system shall be more than 85 lumens per watt and must be certified by LM-79 test report fixed on street light bracket fabricated out of GI tubing, light grade, 32mm bore, bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp made of flat iron 45 x 5 mm of suitable length (04 pairs) including nuts, bolts etc of suitable size and painting to MS clamps with two coats of aluminum paint over one coat of red oxide primer and including connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm including taking down existing one complete all as specified and directed. Note :- (a) Bidder shall submit test report of LED street light fitting from accredited test laboratory for LM-79 (b)Bidder has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of CA. The product will be replaced free of cost in the following cases : - (i) Manufacturing defects (ii) Failure due to mechanical and electrical impact, (iii) Drop in lumen (or lux at 1m) below 90% of claimed values of lumen (or lux at 1m) of the LED/ luminairies. (c) All LED light luminaire must meet the provision laid down in IS-16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part-II/ Section 13 (d) Scope of work shall include supply and fixing street light fittings on poles which includes required T & P and accessories etc if any, making connection, testing etc complete. No extra payment is admissible on these account.
Supply and fix electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc with nut bolts, inlet and outlet connection with PVC tube for cold water inlet and PVC reinforced tube for hot water outlet complete all as specified and directed Note :- A Sum of Rs.92,623.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 37 (Schedule of credit) of Tender Documents.
NAV DURGA CONSTRUCTION CO
N.G BUILDERS
BANSAL BUILDERS
NEW AMRITSAR CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .