Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹30.7 L+₹75,138 (2.51%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹32.6 L+₹2.7 L (8.91%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹35.0 L+₹5.0 L (16.7%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L4 | Rejected-Finance Not lowest bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
REPAIRS AND MAINTENANCE TO SUCTION DELIVERY AND DISTRIBUTION WATER PIPE LINES INCLUDING ALLIED WORKS AT TB II AND DUNKRIK LINE INSTALLATIONS UNDER AGE EM I AT GE CENTRAL KIRKEE.
2022_MES_533381_2
8663/E8 OF 2022-2023
Open Tender
Pipes and Pipe related activities
Item Rate
270 days
TB2 AND DUNKRIK LINE area
Class D Category a(ii)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹80,000
Yes
28 Aug 2022
25 Jul 2022
15 Aug 2022
25 Jul 2022
13 Aug 2022
1 Aug 2022
25 Jul 2022 - 30 Jul 2022
Amount
Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying of pipes etc and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipes etc and getting out in soft disintegrated rock / road cuttings complete all as specified and as directed.
Removing surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and as directed.
Returning, filling in trenches, including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed.
Repairs, renewal of pipie lines and attending emergency water supply break down complaints within 6 hours on telephonic intimation/SMS by arranging JCB/ excavator for excavation, breaking foot path paved with PCC blocks, PCC flooring, bituminus road etc., up to 4 mtrs depth,dewatering with suitable dewatering pump,cutting and removing defective pipes, lowering the required size of pipes, valves and fittings with the help of crane and welding works if any, refilling the trench after repairs with excavated soil, relaying of removed PCC blocks and matching with sorroundings etc complete including PCC work as directed at site. NOTE:- (i) Materials required for the repairs such as pipes, fittings, valves, mechanical joints, PCC, PCC blocks will be measured and paid under relevant items. (ii) Items such as Rubber gaskets,nuts, bolts and washers etc are to be included in the quoted rate. Contd....06
Contd,, from 05 (iii) The contractor shall provide sufficient barricades, caution tape, danger boards etc at work site to avoid any accidents at site. (iv) If the contractor fails to start the work within 6 hours on receipt of telephonic intimation /SMS, necessary recovery will be made twice the quoted rates of respective items. (v)) Compensation if any, due to any accident at site to be borne by the contractor.
Material and labour for taking up cast iron water mains including all fittings of 80mm bore dia pipe with spigot and socket ends from trenches complete all as psecified and as directed.
All as per Sl Item No.7 above but size of pipe 100 mm bore.
All as per Sl Item No.7 above but size of pipe 150 mm bore.
All as per Sl Item No.7 above but size of pipe 200 mm bore.
All as per Sl Item No.7 above but size of pipe 250 mm bore.
All as per Sl Item No.7 above but size of pipe 300 mm bore.
Material and labour for cutting cast iron pipes in position for insertion of fittings, mechanical joints, replacement of pipes suitable for bore of pipe 80mm complete all as specified and as directed.
All as per Sl Item No.13 above but 100 mm bore pipe.
All as per Sl Item No.13 above but 150 mm bore pipe.
All as per Sl Item No.13 above but 200 mm bore pipe.
All as per Sl Item No.13 above but 250 mm bore pipe.
All as per Sl Item No.13 above but 300 mm bore pipe.
Supply and fix mild steel mechanical joints with rubber washer, mild steel screw bolts (machine made) with screwed at both ends of dia as per flange hole and required length, each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 80mm dia complete all as specified and as directed.
All as per Sl Item No.19 above but 100 mm bore pipe.
All as per Sl Item No.19 above but 150 mm bore pipe.
All as per Sl Item No.19 above but 200 mm bore pipe.
All as per Sl Item No.19 above but 250 mm bore pipe.
All as per Sl Item No.19 above but 300 mm bore pipe.
Material and labour for Ductile iron fittings such as bends (any type, radius and angle), tapers any type, straight, bend, increasing, decreasing or double socket etc., Tee piece, single branch 'Y'junction, double branch, collar, caps and plugs as per IS: 9523-2000 of class K-7, with internal cement mortor lining and external zinc and black bitumen coated of dia upto 150 mm bore complete all as specified and as directed.
All as per Sl Item No. 25 above but of dia upto 200 to 300mm complete all as specified and as directed.
Supply, laying, jointing and testing Ductile iron - K7 class with spigot and socket, suitable for push on rubber joint, with internal cement mortor lining, external zinc and black bitumen coated pipes in any length conforming to IS: 8329-2000 including rubber gasket and joints as per IS: 9523-2000 laid in trenches/ road / ducts / foot path / on wall / on floor locations for 100 mm bore dia pipe complete all as specified and as directed. MAKE:- Electro steel / JIndal / TATA
All as per Sl Item No.27 above but 150 mm bore pipe.
All as per Sl Item No.27 above but 200 mm bore pipe.
All as per Sl Item No.27 above but 250 mm bore pipe.
All as per Sl Item No.27 above but 300 mm bore pipe.
Material and labour for laying, jointing and testing MS pipe 100 mm to 250 mm bore, 8 mm thick, externally coated with anti corrosive paint with welded joints laid in trenches in short lengths as required at site up to 4 mtr in depth including taking out defective pipes all as specified and as directed.
All as per Sl Item No. 32 above but for MS pipe of 300mm to 450mm dia.
Material and labour for MS fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y'junction double branch, collar, caps and plugs etc of 8mm thick externally coated with anti corrosive paint duly welding the joints internally and externally of dia upto 250 mm bore complete all as specified and as directed.
All as per Sl Item No. 34 above but of dia upto 450 mm.
Material and labour for taking up worn out GI steel tubing including all fitings from trenches of 15 mm bore complete all as specified and as directed.
All as per Sl Item No. 36 above but 20 mm bore pipes.
All as per Sl Item No. 36 above but 25 mm bore pipes.
All as per Sl Item No. 36 above but 40 mm to 50 mm bore pipes.
All as per Sl Item No. 36 above but 80 mm bore pipes.
All as per Sl Item No. 36 above but 100 mm bore pipes.
All as per Sl Item No. 36 above but 150 mm bore pipes.
Material and labour for laying in trenches / fixed to wall galvanised steel water tubing 15 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed. MAKE:- Tata/Jindal / Zenith
All as per Sl Item No.43 above but 20 mm bore pipes.
All as per Sl Item No.43 above but 25 mm bore pipes.
All as per Sl Item No.43 above but 40 mm bore pipes.
All as per Sl Item No.43 above but 50 mm bore pipes.
All as per Sl Item No.43 above but 80 mm bore pipes.
All as per Sl Item No.43 above but 100 mm bore pipes.
All as per Sl Item No.43 above but 150 mm bore pipes.
Supply and fix in repairs cast iron body non raising stainless steel spindle sluice valve with cast iron wheel, of size 80 mm bore, class PN-1.6 with brass nut, gasket etc with both ends flanged conforming to IS-14846 with standard bolts hole, fixing with nuts, bolts, washers, rubber gasket etc complete fixed in position of pipe line all as specified and directed. MAKE:- Kirloskar/Upadhaya /L&T
All as per Sl Item No.51 above but 100 mm bore
All as per Sl Item No.51 above but 150 mm bore
All as per Sl Item No.51 above but 200 mm bore
All as per Sl Item No.51 above but 250 mm bore
All as per Sl Item No.51 above but 300 mm bore
All as per Sl Item No.51 above but 450 mm bore
Supply and fix in repairs cast iron air release valves with twin globe air outlet, 100 mm dia flanged type, including fittings as required at site, making necessary modification/ arrangements and on CI/MS/DI pipeline of bore up to 450 mm dia complete all as specified and as directed. MAKE : Normex/Kirloskar / L&T
Material and labour for dismantling / taking out carefully sluice valve head with gate, spindle and stuffing box of size 80 mm to 450 mm bore in position, replacement of worn out SS/GM spindle including GM nut with new SS/GM spindle and GM nut for sluice valve class PN 1.6/ 1.0, and refixing the gate, spindle, nut and valve head with stuffing box including necessary PTFE gland packing, nuts, bolts, washers, gland bolts, rubber gaskets etc., complete all as specified and as directed. NOTE:- (i) SS/GM spindle, shall be measured and paid separately under respective items as per site requirement. (ii) Rate of SS Nuts, bolts & washers and gland packing/rubber gasket shall be deemed to be included in quoted rate.
Supply and fix stainless steel spindle for sluice valve class PN 1.6/ 1.0, 80 mm to 150 mm bore complete all as specified and as directed.
Supply and fix stainless steel spindle for sluice valve class PN 1.6/ 1.0, 200 mm to 300 mm bore complete all as specified and as directed.
Supply and fix stainless steel spindle for sluice valve class PN 1.6/ 1.0, 450 mm bore complete all as specified and as directed.
Supply and fix in repairs gun metal gate valve with iron wheel head ISI mark embosed on it, screwed both ends for iron pipes 15mm bore complete all as specified and directed. MAKE:-Zoloto/Leader / Kirloskar
All as per Sl Item No.63 above but 20 mm bore.
All as per Sl Item No.63 above but 25 mm bore
All as per Sl Item No.63 above but 40 mm bore
All as per Sl Item No.63 above but 50 mm bore
Supply and fix in repairs cast Iron swing check non return valve conforming to IS : 5312 (Part I) of 1969, both ends flanged with rubber gasket, nuts, bolts and washers of sizes 150 mm bore complete all as specified and as directed. MAKE : Normex/Kirloskar / L&T
All as per Sl Item No.68 above but 100 mm bore.
Supply and fix in repairs cast Iron foot valve conforming to IS : 4038 with flanged ends, rubber gasket, nuts, bolts and washers of size 150/200 mm bore complete all as specified and as directed. MAKE:- Normex/Kirloskar / L& T
All as per Sl Item No.70 above but 100 mm bore.
All as per Sl Item No.70 above but 80 mm bore.
Material and labour for plain cement concrete, (1:5:8) type C5 block masonry over 10 cm in width built in cement mortar (1:6) complete all as specified including demolition of un serviceable precast concrete block walling built in cement mortor all as specified and as directed.
Material and labour for cement plaster 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finishing the surfaces even and fair including taking down plaster of any description, racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for plain cement concrete (1:3:6), type-C2, using 40mm graded stone aggregate as in foundation, filling and mass concrete including necessary form work where ever required and including demolition of plain cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
Material and labour for rolled mild steel framed work with ends of bars souldered, welded or rivetted or forged into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valve pit and similar work conforming to Fe.290.Gde-E-165 including painting with one coat of red oxide primer and two coats of anticorrosive black bituminous paint including dismantling mild steel work of any description not otherwise specially provided for all as specified and as directed.
Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of cement based paint complete all as specified and as directed.
Material and labour for Plain Cement Concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick complete all as specified and as directed.
Supply and fix 80 mm thick machine pressed precast concrete rubber moulded coloured interlocking paver blocks with coloured cement and pigment any shape and size conforming to IS-15658-2006 M-40 grade laid over and including 50 mm thick sand cushionining complet all as specified and as directed.
Supply and fix hot dipped galvanised chain link fencing with zinc coating, nominal height-2400mm, pitch-50mm and wire dia 3.15 mm, approx weight-2.55 Kg /sqm complete all as specified and as directed.
Material and labour for rolled mild steel work of angle iron sections fixed independently for fencing post and others conforming to Gde Fe 410-A including cutting to dead end length where required, notching, drilling, fitting and/or welding or connecting with bolts and nuts including dismantling taking down un serviceable one complete all as specified and as directed.
Material and labour for TMT steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips complete for support of chain link fencing incl dismantling / taking down un serviceable one all as specified and as directed.
Dismantling and taking out complete pump of any type, capacity 90 HP to 100 HP from foundation including dismantling suction and delivery pipe connection from pump, carrying to work shop and back, repair / overhauling complete, reassemble and fixing to original position after repair / overhauling with nuts, bolts, washers, pipe connection complete including testing and commissioning all as specified and as directed. NOTE:- (i) Spares required for the repairs will be measured and paid under respective items of BoQ (ii) Small items such as gaskets, nuts,bolts and washers,screws, consumable like grease etc will be deemed to be included in quoted rate.
Supply only ball bearing (DE) complete all as specified and as directed.
Supply only ball bearing( NDE) complete all as specified and as directed.
Supply only impeller complete all as specified and as directed.
Supply only pump shaft complete all as specified and as directed.
Supply only lantern ring complete all as specified and as directed.
Supply only mechanical seal complete all as specified and as directed.
Supply only water deflector complete all as specified and as directed.
Supply only bush complete all as specified and as directed.
Supply only key impeller complete all as specified and as directed.
Supply only gland packing complete all as specified and as directed.
Supply only gasket set complete all as specified and as directed.
Dismantling taking out complete pump of any type, capacity 15HP to 30HP of different models from foundation including dismantling suction and delivery pipe, connection from pump, carrying to work shop and back, repair / overhauling complete, reassemble, fixing to original position after repairs/overhauling with nuts, bolts, washers, pipe connection complete including testing, commissioning all as specified and as directed. NOTE:- (i) Spares required for the repairs will be measured and paid under respective items of BoQ. (ii) Small items such as gaskets, nuts,bolts and washers, screws, consumable like grease etc., will be deemed to be included in quoted rate.
Supply only ball bearing (DE) complete all as specified and as directed.
Supply only ball bearing( NDE) complete all as specified and as directed.
Supply only impeller complete all as specified and as directed.
Supply only pump shaft complete all as specified and as directed.
Supply only lantern ring complete all as specified and as directed.
Supply only mechanical seal complete all as specified and as directed.
Supply only water deflector complete all as specified and as directed.
Supply only bush complete all as specified and as directed.
Supply only key impeller complete all as specified and as directed.
Supply only gland packing complete all as specified and as directed.
Supply only gasket set complete all as specified and as directed.
Dismantling and taking out induction motor 90 HP to 100 HP from foundation by removing electric connections and coupling carefully, carrying to work shop & back for repairs complete, reassemble, fixing to original position after repairs / overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning and proper alignment all as specified and as directed.
Dismantling and taking out induction motor 15 HP to 30 HP from foundation by removing electric connections and coupling carefully, carrying to work shop & back for repairs complete, reassemble, fixing to original position after repairs / overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning and proper alignment all as specified and as directed.
Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials / lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing, drying and proper testing after rewinding for motor capacity 90 HP to 100 HP all as specified and as directed.
Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials / lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing, drying and proper testing after rewinding for motor capacity 15 HP to 30 HP all as specified and as directed.
All as per Sl Item No. 112 above but for capacity upto 30 HP
Material and labour for calcium hypochlorite (65% to 70% chlorine content) calcium based granular disinfectant in 45 Kg drums complete all as specified and as directed.
Material and labour for Alum ferric Gde -I complete all as specified and as directed.
Material and labour for hydrated lime suitable for drinking water complete all as specified and as directed.
Material and labour for cleaning of RCC over head reservior of 50000 gallon capacity internally by brushing walls, floors by thorough washing using jet spray ,removing all dirt, mud etc through drain out pipe complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm and painting the cleaned internal surfaces with a coat of white wash complete all as specified and as directed.
Material and labour for cleaning of RCC over head reservior of 20000 gallon capacity internally by brushing walls, floors by thorough washing using jet spray ,removing all dirt, mud etc through drain out pipe complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm and painting the cleaned internal surfaces with a coat of white wash complete all as specified and as directed.
Material and labour for cleaning of RCC over head reservior of 10000 gallon capacity internally by brushing walls, floors by thorough washing using jet spray ,removing all dirt, mud etc through drain out pipe complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm and painting the cleaned internal surfaces with a coat of white wash complete all as specified and as directed.
Cleaning of RCC semi UG clear water sump of 1,00,000 gallon capacity internally by brushing walls, floors and thorough washing using jet spray, removing all dirt, mud etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm and painting the cleaned internal surfaces with a coat of white wash complete all as specified and as directed.
Cleaning of RCC semi UG clear water sump of 50,000 gallon capacity internally by brushing walls, floors and thorough washing using jet spray, removing all dirt, mud etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm and painting the cleaned internal surfaces with a coat of white wash complete all as specified and as directed.
Cleaning of RCC semi UG clear water sump of 10,000 gallon capacity internally by brushing walls, floors and thorough washing using jet spray, removing all dirt, mud etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm and painting the cleaned internal surfaces with a coat of white wash complete all as specified and as directed.
Material and labour for cleaning of various MES water supply installation campus by surface dressing to remove small unequalities n.exc. 15 cm deep ( including removing vegetation / shrubs / creepers / under-growth), cleaning of drains & carrying away the rubbish to a distance of n.exc. 50 mtr away complete as specified and as directed.
Chemical testing of water sample at monthly interval in PMC or any govt recognised water testing lab for the following parameters:- Turbidity, pH, Total hardness, Alkalinity, Chloride, nitrate, TDS, Iron, Flourides, calcium, Magnesium, Aluminium, Sulphide, Lead, Arsenic, Manganese, Copper, Mercury, residual chlorine. NOTE:- (i) Sample of water to be collected from each pump houses at TB-II and YPH in sterilised bottle provided by the lab. (ii) Sample of water to be deposited to lab and report to be collected duly signed by authorised person of lab. (iii) Cost of transportation of water sample and collection of report shall be inclusive of quoted rate, (iv) Cost of testing as specified shall be paid to lab directly by the contractor and the cost shall be inclusive of quoted rate. (v) Test shall be carried out in scheduled time, otherwise recovery shall be effected thrice the quoted rate. (vi) Complete parameter testing shall be considered as one job.
JP ENTERPRISES
M R ENTERPRISES
ONKAR ELECTRIC AND GENERAL STORE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .